ACD-PAA-MIB

--
-- Accedian Enterprise Specific MIB
--
-- Copyright (c) 2005-2009, Accedian Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--


ACD-PAA-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE,
    IpAddress, Integer32, Unsigned32
        FROM SNMPv2-SMI
    DisplayString, TruthValue, MacAddress, DateAndTime
        FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    acdMibs
        FROM ACCEDIAN-SMI;

acdPaa MODULE-IDENTITY

    LAST-UPDATED "201011100100Z"
    ORGANIZATION "Accedian Networks, Inc."
    CONTACT-INFO
            "Accedian Technical Assistance Center
             Accedian Networks, Inc.
             4878 Levy, suite 202
             Saint-Laurent, Quebec Canada H4R 2P1
             E-mail: support@accedian.com"
    DESCRIPTION
            "PAA database for this Accedian Networks device."

    REVISION "201011100100Z"        -- 10 November 2010
    DESCRIPTION
            "Add compliance section."

    REVISION "200902230100Z"        -- 23 Feb 2009
    DESCRIPTION
            "Add support for extended packet loss ratio."

    REVISION "200802060100Z"        -- 6 Feb 2008
    DESCRIPTION
            "Add support for history table."

    REVISION "200710120100Z"        -- 12 Oct 2007
    DESCRIPTION
            "Add support for one-way delay and L2 address discovery."

    REVISION "200612180100Z"        -- 18 Dec 2006
    DESCRIPTION
            "Change the loss ration to in hundredths of a percent."

    REVISION "200611110100Z"        -- 11 Nov 2006
    DESCRIPTION
            "Initial version of MIB module ACD-PAA-MIB."

    ::= { acdMibs 5 }
    
acdPaaNotifications   OBJECT IDENTIFIER ::= { acdPaa 7 }
acdPaaMIBObjects      OBJECT IDENTIFIER ::= { acdPaa 8 }
acdPaaConformance     OBJECT IDENTIFIER ::= { acdPaa 9 }

---------------------------------------------------------------------------
 -- The PAA Results table
 -- This table contains all PAA entry results.
---------------------------------------------------------------------------

acdPaaResultTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AcdPaaResultEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Result table of all Paa entries"
    ::= { acdPaa 1 }

acdPaaResultEntry OBJECT-TYPE
    SYNTAX      AcdPaaResultEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry consisting of results for a PAA instance."
    INDEX   { acdPaaResultID }
    ::=  { acdPaaResultTable 1 }


AcdPaaResultEntry ::= SEQUENCE {
    acdPaaResultID                      Unsigned32,
    acdPaaResultState                   INTEGER,
    acdPaaResultPktLossNeCurrValid      TruthValue,
    acdPaaResultPktLossNeCurrValue      Unsigned32,
    acdPaaResultPktLossNePrevValid      TruthValue,
    acdPaaResultPktLossNePrevValue      Unsigned32,
    acdPaaResultPktLossFeCurrValid      TruthValue,
    acdPaaResultPktLossFeCurrValue      Unsigned32,
    acdPaaResultPktLossFePrevValid      TruthValue,
    acdPaaResultPktLossFePrevValue      Unsigned32,
    acdPaaResultOneWayDvInstValue       Integer32,
    acdPaaResultOneWayDvCurrValid       TruthValue,
    acdPaaResultOneWayDvCurrMinValue    Integer32,
    acdPaaResultOneWayDvCurrMaxValue    Integer32,
    acdPaaResultOneWayDvCurrAvgValue    Integer32,
    acdPaaResultOneWayDvCurrThreshExc   Unsigned32,
    acdPaaResultOneWayDvPrevValid       TruthValue,
    acdPaaResultOneWayDvPrevMinValue    Integer32,
    acdPaaResultOneWayDvPrevMaxValue    Integer32,
    acdPaaResultOneWayDvPrevAvgValue    Integer32,
    acdPaaResultOneWayDvPrevThreshEx    Unsigned32,
    acdPaaResultTwoWayDelayInstValue    Integer32,
    acdPaaResultTwoWayDelayCurrValid    TruthValue,
    acdPaaResultTwoWayDelayCurrMinValue Integer32,
    acdPaaResultTwoWayDelayCurrMaxValue Integer32,
    acdPaaResultTwoWayDelayCurrAvgValue Integer32,
    acdPaaResultTwoWayDelayCurrThreshEx Unsigned32,
    acdPaaResultTwoWayDelayPrevValid    TruthValue,
    acdPaaResultTwoWayDelayPrevMinValue Integer32,
    acdPaaResultTwoWayDelayPrevMaxValue Integer32,
    acdPaaResultTwoWayDelayPrevAvgValue Integer32,
    acdPaaResultTwoWayDelayPrevThreshEx Unsigned32,
    acdPaaResultTwoWayDvInstValue       Integer32,
    acdPaaResultTwoWayDvCurrValid       TruthValue,
    acdPaaResultTwoWayDvCurrMinValue    Integer32,
    acdPaaResultTwoWayDvCurrMaxValue    Integer32,
    acdPaaResultTwoWayDvCurrAvgValue    Integer32,
    acdPaaResultTwoWayDvCurrThreshEx    Unsigned32,
    acdPaaResultTwoWayDvPrevValid       TruthValue,
    acdPaaResultTwoWayDvPrevMinValue    Integer32,
    acdPaaResultTwoWayDvPrevMaxValue    Integer32,
    acdPaaResultTwoWayDvPrevAvgValue    Integer32,
    acdPaaResultTwoWayDvPrevThreshEx    Unsigned32,
    acdPaaResultOneWayDelayInstValue    Integer32,
    acdPaaResultOneWayDelayCurrValid    TruthValue,
    acdPaaResultOneWayDelayCurrMinValue Integer32,
    acdPaaResultOneWayDelayCurrMaxValue Integer32,
    acdPaaResultOneWayDelayCurrAvgValue Integer32,
    acdPaaResultOneWayDelayCurrThreshEx Unsigned32,
    acdPaaResultOneWayDelayPrevValid    TruthValue,
    acdPaaResultOneWayDelayPrevMinValue Integer32,
    acdPaaResultOneWayDelayPrevMaxValue Integer32,
    acdPaaResultOneWayDelayPrevAvgValue Integer32,
    acdPaaResultOneWayDelayPrevThreshEx Unsigned32,
    acdPaaResultPktLossTime             DateAndTime,
    acdPaaResultOneWayTime              DateAndTime,
    acdPaaResultTwoWayTime              DateAndTime,
    acdPaaResultPktLossNeCurrSamples    Unsigned32,
    acdPaaResultPktLossNePrevSamples    Unsigned32,
    acdPaaResultPktLossFeCurrSamples    Unsigned32,
    acdPaaResultPktLossFePrevSamples    Unsigned32,
    acdPaaResultOneWayDelayCurrSamples  Unsigned32,
    acdPaaResultOneWayDelayPrevSamples  Unsigned32,
    acdPaaResultOneWayDvCurrSamples     Unsigned32,
    acdPaaResultOneWayDvPrevSamples     Unsigned32,
    acdPaaResultTwoWayDelayCurrSamples  Unsigned32,
    acdPaaResultTwoWayDelayPrevSamples  Unsigned32,
    acdPaaResultTwoWayDvCurrSamples     Unsigned32,
    acdPaaResultTwoWayDvPrevSamples     Unsigned32,
    acdPaaResultIgmpJoinDelayInstValue     Integer32,
    acdPaaResultIgmpJoinDelayCurrValid     TruthValue,
    acdPaaResultIgmpJoinDelayCurrMinValue  Integer32,
    acdPaaResultIgmpJoinDelayCurrMaxValue  Integer32,
    acdPaaResultIgmpJoinDelayCurrAvgValue  Integer32,
    acdPaaResultIgmpJoinDelayCurrThreshEx  Unsigned32,
    acdPaaResultIgmpJoinDelayPrevValid     TruthValue,
    acdPaaResultIgmpJoinDelayPrevMinValue  Integer32,
    acdPaaResultIgmpJoinDelayPrevMaxValue  Integer32,
    acdPaaResultIgmpJoinDelayPrevAvgValue  Integer32,
    acdPaaResultIgmpJoinDelayPrevThreshEx  Unsigned32,
    acdPaaResultIgmpLeaveDelayInstValue    Integer32,
    acdPaaResultIgmpLeaveDelayCurrValid    TruthValue,
    acdPaaResultIgmpLeaveDelayCurrMinValue Integer32,
    acdPaaResultIgmpLeaveDelayCurrMaxValue Integer32,
    acdPaaResultIgmpLeaveDelayCurrAvgValue Integer32,
    acdPaaResultIgmpLeaveDelayCurrThreshEx Unsigned32,
    acdPaaResultIgmpLeaveDelayPrevValid    TruthValue,
    acdPaaResultIgmpLeaveDelayPrevMinValue Integer32,
    acdPaaResultIgmpLeaveDelayPrevMaxValue Integer32,
    acdPaaResultIgmpLeaveDelayPrevAvgValue Integer32,
    acdPaaResultIgmpLeaveDelayPrevThreshEx Unsigned32,
    acdPaaResultIgmpJoinDelayTime          DateAndTime,
    acdPaaResultIgmpLeaveDelayTime         DateAndTime,
    acdPaaResultIgmpJoinDelayCurrSamples   Unsigned32,
    acdPaaResultIgmpJoinDelayPrevSamples   Unsigned32,
    acdPaaResultIgmpLeaveDelayCurrSamples  Unsigned32,
    acdPaaResultIgmpLeaveDelayPrevSamples  Unsigned32,
    acdPaaResultPktLossCurrGaps            Unsigned32,
    acdPaaResultPktLossPrevGaps            Unsigned32,
    acdPaaResultPktLossCurrLargestGap      Unsigned32,
    acdPaaResultPktLossPrevLargestGap      Unsigned32,
    acdPaaResultPktLossNeCurrValueExt      Unsigned32,
    acdPaaResultPktLossNePrevValueExt      Unsigned32,
    acdPaaResultPktLossFeCurrValueExt      Unsigned32,
    acdPaaResultPktLossFePrevValueExt      Unsigned32,
    acdPaaResultPktLossNeCurrNbrLoss       Unsigned32,
    acdPaaResultPktLossNePrevNbrLoss       Unsigned32,
    acdPaaResultPktLossFeCurrNbrLoss       Unsigned32,
    acdPaaResultPktLossFePrevNbrLoss       Unsigned32
}

acdPaaResultID  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Unique value for each PAA instance. Its value ranges from 1 to
        MAXINT (4 bytes). "
    ::= { acdPaaResultEntry 1 }

acdPaaResultState  OBJECT-TYPE
    SYNTAX      INTEGER {
                    disabled(0),
                    associating(1),
                    associated(2),
                    running(3),
                    idle(4),
                    lockedIS(5),
                    lockedOOS(6)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the state of the instance."
    ::= { acdPaaResultEntry 2 }

acdPaaResultPktLossNeCurrValid  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the validity of the Near-end current packet loss results."
    ::= { acdPaaResultEntry 3 }

acdPaaResultPktLossNeCurrValue  OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the Near-end current packet loss. The packet loss is the
         percent of packets transmitted but not received of the Ethernet segment
         in hundredths of a percent (100 is 1%)."
    ::= { acdPaaResultEntry 4 }

acdPaaResultPktLossNePrevValid  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the validity of the Near-end previous packet loss results."
    ::= { acdPaaResultEntry 5 }

acdPaaResultPktLossNePrevValue  OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the Near-end previous packet loss. The packet loss is the
         percent of packets transmitted but not received of the Ethernet segment
         in hundredths of a percent (100 is 1%)."
    ::= { acdPaaResultEntry 6 }

acdPaaResultPktLossFeCurrValid  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the validity of the Far-end current packet loss results."
    ::= { acdPaaResultEntry 7 }

acdPaaResultPktLossFeCurrValue  OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the Far-end current packet loss. The packet loss is the
         percent of packets transmitted but not received of the Ethernet segment
         in hundredths of a percent (100 is 1%)."
    ::= { acdPaaResultEntry 8 }

acdPaaResultPktLossFePrevValid  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the validity of the Far-end previous packet loss results."
    ::= { acdPaaResultEntry 9 }

acdPaaResultPktLossFePrevValue  OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the Far-end previous packet loss. The packet loss is the
         percent of packets transmitted but not received of the Ethernet segment
         in hundredths of a percent (100 is 1%)."
    ::= { acdPaaResultEntry 10 }

acdPaaResultOneWayDvInstValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the One-way delay variation instantaneous value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 11 }

acdPaaResultOneWayDvCurrValid  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the validity of the current One-way delay variation results."
    ::= { acdPaaResultEntry 12 }

acdPaaResultOneWayDvCurrMinValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the current One-way delay variation minimum value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 13 }

acdPaaResultOneWayDvCurrMaxValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the current One-way delay variation maximum value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 14 }

acdPaaResultOneWayDvCurrAvgValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the current One-way delay variation average value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 15 }

acdPaaResultOneWayDvCurrThreshExc  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the current number of samples exceeding the limit."
    ::= { acdPaaResultEntry 16 }

acdPaaResultOneWayDvPrevValid  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the validity of the previous One-way delay variation results."
    ::= { acdPaaResultEntry 17 }

acdPaaResultOneWayDvPrevMinValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the previous One-way delay variation minimum value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 18 }

acdPaaResultOneWayDvPrevMaxValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the previous One-way delay variation maximum value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 19 }

acdPaaResultOneWayDvPrevAvgValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the previous One-way delay variation average value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 20 }

acdPaaResultOneWayDvPrevThreshEx  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the previous number of samples exceeding the limit."
    ::= { acdPaaResultEntry 21 }

acdPaaResultTwoWayDelayInstValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the Two-way delay instantaneous value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 22 }

acdPaaResultTwoWayDelayCurrValid  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the validity of the current Two-way delay results."
    ::= { acdPaaResultEntry 23 }

acdPaaResultTwoWayDelayCurrMinValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the current Two-way delay minimum value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 24 }

acdPaaResultTwoWayDelayCurrMaxValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the current Two-way delay maximum value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 25 }

acdPaaResultTwoWayDelayCurrAvgValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the current Two-way delay average value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 26 }

acdPaaResultTwoWayDelayCurrThreshEx  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the current number of samples exceeding the limit."
    ::= { acdPaaResultEntry 27 }

acdPaaResultTwoWayDelayPrevValid  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the validity of the previous Two-way delay results."
    ::= { acdPaaResultEntry 28 }

acdPaaResultTwoWayDelayPrevMinValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the previous Two-way delay minimum value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 29 }

acdPaaResultTwoWayDelayPrevMaxValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the previous Two-way delay maximum value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 30 }

acdPaaResultTwoWayDelayPrevAvgValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the previous Two-way delay average value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 31 }

acdPaaResultTwoWayDelayPrevThreshEx  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the previous number of samples exceeding the limit."
    ::= { acdPaaResultEntry 32 }

acdPaaResultTwoWayDvInstValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the Two-way delay variation instantaneous value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 33 }

acdPaaResultTwoWayDvCurrValid  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the validity of the current Two-way delay variation results."
    ::= { acdPaaResultEntry 34 }

acdPaaResultTwoWayDvCurrMinValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the current Two-way delay variation minimum value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 35 }

acdPaaResultTwoWayDvCurrMaxValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the current Two-way delay variation maximum value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 36 }

acdPaaResultTwoWayDvCurrAvgValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the current Two-way delay variation average value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 37 }

acdPaaResultTwoWayDvCurrThreshEx  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the current number of samples exceeding the limit."
    ::= { acdPaaResultEntry 38 }

acdPaaResultTwoWayDvPrevValid  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the validity of the previous Two-way delay variation results."
    ::= { acdPaaResultEntry 39 }

acdPaaResultTwoWayDvPrevMinValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the previous Two-way delay variation minimum value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 40 }

acdPaaResultTwoWayDvPrevMaxValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the previous Two-way delay variation maximum value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 41 }

acdPaaResultTwoWayDvPrevAvgValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the previous Two-way delay variation average value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 42 }

acdPaaResultTwoWayDvPrevThreshEx  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the previous number of samples exceeding the limit."
    ::= { acdPaaResultEntry 43 }

acdPaaResultOneWayDelayInstValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicate the One-way delay instantaneous value. The value
         is express in micro-seconds."
    ::= { acdPaaResultEntry 44 }

acdPaaResultOneWayDelayCurrValid  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicate the validity of the current One-way delay results."
    ::= { acdPaaResultEntry 45 }

acdPaaResultOneWayDelayCurrMinValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicate the current One-way delay minimum value. The value
         is express in micro-seconds."
    ::= { acdPaaResultEntry 46 }

acdPaaResultOneWayDelayCurrMaxValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicate the current One-way delay maximum value. The value
         is express in micro-seconds."
    ::= { acdPaaResultEntry 47 }

acdPaaResultOneWayDelayCurrAvgValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicate the current One-way delay average value. The value
         is express in micro-seconds."
    ::= { acdPaaResultEntry 48 }

acdPaaResultOneWayDelayCurrThreshEx  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicate the current number of sample exceeding the limit."
    ::= { acdPaaResultEntry 49 }

acdPaaResultOneWayDelayPrevValid  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicate the validity of the previous One-way delay results."
    ::= { acdPaaResultEntry 50 }

acdPaaResultOneWayDelayPrevMinValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicate the previous One-way delay minimum value. The value
         is express in micro-seconds."
    ::= { acdPaaResultEntry 51 }

acdPaaResultOneWayDelayPrevMaxValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicate the previous One-way delay maximum value. The value
         is express in micro-seconds."
    ::= { acdPaaResultEntry 52 }

acdPaaResultOneWayDelayPrevAvgValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicate the previous One-way delay average value. The value
         is express in micro-seconds."
    ::= { acdPaaResultEntry 53 }

acdPaaResultOneWayDelayPrevThreshEx  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicate the previous number of sample exceeding the limit."
    ::= { acdPaaResultEntry 54 }

acdPaaResultPktLossTime  OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the time when the current packet loss results
         were moved to the previous packet loss results."
    ::= { acdPaaResultEntry 55 }

acdPaaResultOneWayTime  OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the time when the current one-way results
         were moved to the previous one-way results."
    ::= { acdPaaResultEntry 56 }

acdPaaResultTwoWayTime  OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the time when the current two-way results
         were moved to the previous two-way results."
    ::= { acdPaaResultEntry 57 }

acdPaaResultPktLossNeCurrSamples  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of samples gathered to calculate
         the current period near-end packet loss results."
    ::= { acdPaaResultEntry 58 }

acdPaaResultPktLossNePrevSamples  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of samples gathered to calculate
         the previous period near-end packet loss results."
    ::= { acdPaaResultEntry 59 }

acdPaaResultPktLossFeCurrSamples  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of samples gathered to calculate
         the current period far-end packet loss results."
    ::= { acdPaaResultEntry 60 }

acdPaaResultPktLossFePrevSamples  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of samples gathered to calculate
         the previous period far-end packet loss results."
    ::= { acdPaaResultEntry 61 }

acdPaaResultOneWayDelayCurrSamples  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of samples gathered to calculate
         the current period one-way delay results."
    ::= { acdPaaResultEntry 62 }

acdPaaResultOneWayDelayPrevSamples  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of samples gathered to calculate
         the previous period one-way delay results."
    ::= { acdPaaResultEntry 63 }

acdPaaResultOneWayDvCurrSamples  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of samples gathered to calculate
         the current period one-way delay variation results."
    ::= { acdPaaResultEntry 64 }

acdPaaResultOneWayDvPrevSamples  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of samples gathered to calculate
         the previous period one-way delay variation results."
    ::= { acdPaaResultEntry 65 }

acdPaaResultTwoWayDelayCurrSamples  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of samples gathered to calculate
         the current period two-way delay results."
    ::= { acdPaaResultEntry 66 }

acdPaaResultTwoWayDelayPrevSamples  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of samples gathered to calculate
         the previous period two-way delay results."
    ::= { acdPaaResultEntry 67 }

acdPaaResultTwoWayDvCurrSamples  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of samples gathered to calculate
         the current period two-way delay variation results."
    ::= { acdPaaResultEntry 68 }

acdPaaResultTwoWayDvPrevSamples  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of samples gathered to calculate
         the previous period two-way delay variation results."
    ::= { acdPaaResultEntry 69 }

acdPaaResultIgmpJoinDelayInstValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the IGMP Join delay instantaneous value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 70 }

acdPaaResultIgmpJoinDelayCurrValid  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the validity of the current IGMP Join delay results."
    ::= { acdPaaResultEntry 71 }

acdPaaResultIgmpJoinDelayCurrMinValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the current IGMP Join delay minimum value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 72 }

acdPaaResultIgmpJoinDelayCurrMaxValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the current IGMP Join delay maximum value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 73 }

acdPaaResultIgmpJoinDelayCurrAvgValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the current IGMP Join delay average value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 74 }

acdPaaResultIgmpJoinDelayCurrThreshEx  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the current number of IGMP Join samples exceeding the limit."
    ::= { acdPaaResultEntry 75 }

acdPaaResultIgmpJoinDelayPrevValid  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the validity of the previous IGMP Join delay results."
    ::= { acdPaaResultEntry 76 }

acdPaaResultIgmpJoinDelayPrevMinValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the previous IGMP Join delay minimum value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 77 }

acdPaaResultIgmpJoinDelayPrevMaxValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the previous IGMP Join delay maximum value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 78 }

acdPaaResultIgmpJoinDelayPrevAvgValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the previous IGMP Join delay average value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 79 }

acdPaaResultIgmpJoinDelayPrevThreshEx  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the previous number of IGMP Join samples exceeding the limit."
    ::= { acdPaaResultEntry 80 }

acdPaaResultIgmpLeaveDelayInstValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the IGMP Leave delay instantaneous value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 81 }

acdPaaResultIgmpLeaveDelayCurrValid  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the validity of the current IGMP Leave delay results."
    ::= { acdPaaResultEntry 82 }

acdPaaResultIgmpLeaveDelayCurrMinValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the current IGMP Leave delay minimum value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 83 }

acdPaaResultIgmpLeaveDelayCurrMaxValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the current IGMP Leave delay maximum value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 84 }

acdPaaResultIgmpLeaveDelayCurrAvgValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the current IGMP Leave delay average value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 85 }

acdPaaResultIgmpLeaveDelayCurrThreshEx  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the current number of IGMP Leave samples exceeding the limit."
    ::= { acdPaaResultEntry 86 }

acdPaaResultIgmpLeaveDelayPrevValid  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the validity of the previous IGMP Leave delay results."
    ::= { acdPaaResultEntry 87 }

acdPaaResultIgmpLeaveDelayPrevMinValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the previous IGMP Leave delay minimum value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 88 }

acdPaaResultIgmpLeaveDelayPrevMaxValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the previous IGMP Leave delay maximum value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 89 }

acdPaaResultIgmpLeaveDelayPrevAvgValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the previous IGMP Leave delay average value. The value
         is expressed in micro-seconds."
    ::= { acdPaaResultEntry 90 }

acdPaaResultIgmpLeaveDelayPrevThreshEx  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the previous number of IGMP Leave samples exceeding the limit."
    ::= { acdPaaResultEntry 91 }

acdPaaResultIgmpJoinDelayTime  OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the time when the current IGMP Join delay results
         were moved to the previous IGMP join delay results."
    ::= { acdPaaResultEntry 92 }

acdPaaResultIgmpLeaveDelayTime  OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the time when the current IGMP Leave results
         were moved to the previous IGMP Leave results."
    ::= { acdPaaResultEntry 93 }

acdPaaResultIgmpJoinDelayCurrSamples  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of IGMP Join samples gathered to calculate
         the current period IGMP Join delay results."
    ::= { acdPaaResultEntry 94 }

acdPaaResultIgmpJoinDelayPrevSamples  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of IGMP Join samples gathered to calculate
         the previous period IGMP Join delay results."
    ::= { acdPaaResultEntry 95 }

acdPaaResultIgmpLeaveDelayCurrSamples  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of IGMP Leave samples gathered to calculate
         the current period IGMP Leave delay results."
    ::= { acdPaaResultEntry 96 }

acdPaaResultIgmpLeaveDelayPrevSamples  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of IGMP Leave samples gathered to calculate
         the previous period IGMP Leave delay results."
    ::= { acdPaaResultEntry 97 }

acdPaaResultPktLossCurrGaps  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of gaps that occured in
         the current period."
    ::= { acdPaaResultEntry 98 }

acdPaaResultPktLossPrevGaps  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of gaps that occured in
         the previous period."
    ::= { acdPaaResultEntry 99 }

acdPaaResultPktLossCurrLargestGap  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the size of the largest gap that occured in
         the current period."
    ::= { acdPaaResultEntry 100 }

acdPaaResultPktLossPrevLargestGap  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the size of the largest gap that occured in
         the previous period."
    ::= { acdPaaResultEntry 101 }

acdPaaResultPktLossNeCurrValueExt  OBJECT-TYPE
    SYNTAX      Unsigned32 (0..100000000)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Extended near-end current packet loss. The packet loss is
         the percent of packets transmitted but not received in
         millionth of a percent (1,000,000 is 1%)."
    ::= { acdPaaResultEntry 102 }

acdPaaResultPktLossNePrevValueExt  OBJECT-TYPE
    SYNTAX      Unsigned32 (0..100000000)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Extended near-end previous packet loss. The packet loss is
         the percent of packets transmitted but not received in
         millionth of a percent (1,000,000 is 1%)."
    ::= { acdPaaResultEntry 103 }

acdPaaResultPktLossFeCurrValueExt  OBJECT-TYPE
    SYNTAX      Unsigned32 (0..100000000)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Extended far-end current packet loss. The packet loss is
         the percent of packets transmitted but not received in
         millionth of a percent (1,000,000 is 1%)."
    ::= { acdPaaResultEntry 104 }

acdPaaResultPktLossFePrevValueExt  OBJECT-TYPE
    SYNTAX      Unsigned32 (0..100000000)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Extended far-end previous packet loss. The packet loss is
         the percent of packets transmitted but not received in
         millionth of a percent (1,000,000 is 1%)."
    ::= { acdPaaResultEntry 105 }

acdPaaResultPktLossNeCurrNbrLoss  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the current period number of near-end packet lost.
         This should be less or equal to acdPaaResultPktLossNeCurrSamples. "
    ::= { acdPaaResultEntry 106 }

acdPaaResultPktLossNePrevNbrLoss  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the previous period number of near-end packet lost.
         This should be less or equal to acdPaaResultPktLossNePrevSamples."
    ::= { acdPaaResultEntry 107 }

acdPaaResultPktLossFeCurrNbrLoss  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the current period number of far-end packet lost.
         This should be less or equal to acdPaaResultPktLossFeCurrSamples. "
    ::= { acdPaaResultEntry 108 }

acdPaaResultPktLossFePrevNbrLoss  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the previous period number of far-end packet lost.
         This should be less or equal to acdPaaResultPktLossFePrevSamples."
    ::= { acdPaaResultEntry 109 }


---------------------------------------------------------------------------
 -- The PAA status table
 -- This table contains all PAA entry statuses.
---------------------------------------------------------------------------

acdPaaStatusTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AcdPaaStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Status table of all Paa entries"
    ::= { acdPaa 2 }

acdPaaStatusEntry OBJECT-TYPE
    SYNTAX      AcdPaaStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry consisting of the status for a PAA instance."
    INDEX   { acdPaaStatusID }
    ::=  { acdPaaStatusTable 1 }

AcdPaaStatusEntry ::= SEQUENCE {
    acdPaaStatusID                      Unsigned32,
    acdPaaStatusCcAlert                 TruthValue,
    acdPaaStatusPktLossAlert            TruthValue,
    acdPaaStatusOneWayDvAlert           TruthValue,
    acdPaaStatusOneWayAvgDvAlert        TruthValue,
    acdPaaStatusTwoWayDelayAlert        TruthValue,
    acdPaaStatusTwoWayAvgDelayAlert     TruthValue,
    acdPaaStatusTwoWayDvAlert           TruthValue,
    acdPaaStatusTwoWayAvgDvAlert        TruthValue,
    acdPaaStatusOneWayDelayAlert        TruthValue,
    acdPaaStatusOneWayAvgDelayAlert     TruthValue,
    acdPaaStatusState                   INTEGER,
    acdPaaStatusPeerAddress             DisplayString
}

acdPaaStatusID  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Unique value for each PAA instance. Its value ranges from 1 to
        MAXINT (4 bytes). "
    ::= { acdPaaStatusEntry 1 }

acdPaaStatusCcAlert  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the presence of the Connectivity Check alert."
    ::= { acdPaaStatusEntry 2 }

acdPaaStatusPktLossAlert  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the presence of the Packet Loss alert."
    ::= { acdPaaStatusEntry 3 }

acdPaaStatusOneWayDvAlert  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the presence of the One-way Delay Variation alert."
    ::= { acdPaaStatusEntry 4 }

acdPaaStatusOneWayAvgDvAlert  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the presence of the One-way Average Delay Variation alert."
    ::= { acdPaaStatusEntry 5 }

acdPaaStatusTwoWayDelayAlert  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the presence of the Two-way Delay alert."
    ::= { acdPaaStatusEntry 6 }

acdPaaStatusTwoWayAvgDelayAlert  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the presence of the Two-way Average Delay alert."
    ::= { acdPaaStatusEntry 7 }

acdPaaStatusTwoWayDvAlert  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the presence of the Two-way Delay Variation alert."
    ::= { acdPaaStatusEntry 8 }

acdPaaStatusTwoWayAvgDvAlert  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the presence of the Two-way Average Delay Variation alert."
    ::= { acdPaaStatusEntry 9 }

acdPaaStatusOneWayDelayAlert  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicate the presence of the One Way Delay alert."
    ::= { acdPaaStatusEntry 10 }

acdPaaStatusOneWayAvgDelayAlert  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicate the presence of the One Way Average Delay alert."
    ::= { acdPaaStatusEntry 11 }

acdPaaStatusState  OBJECT-TYPE
   SYNTAX       INTEGER {
                    disabled(0),
                    associating(1),
                    associated(2),
                    running(3),
                    idle(4),
                    lockedIS(5),
                    lockedOOS(6)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Paa instance state."
    ::= { acdPaaStatusEntry 12 }

acdPaaStatusPeerAddress  OBJECT-TYPE
    SYNTAX      DisplayString (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The peer address. Dynamically resolved or statically configured."
    ::= { acdPaaStatusEntry 13 }


---------------------------------------------------------------------------
 -- The UDP PAA configuration table
 -- This table contains all UDP PAA entry configurations.
---------------------------------------------------------------------------

acdPaaUdpCfgTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AcdPaaUdpCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Configuration table of all UDP PAA entries."
    ::= { acdPaa 3 }

acdPaaUdpCfgEntry OBJECT-TYPE
    SYNTAX      AcdPaaUdpCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry consisting of all settings to manage a PAA instance."
    INDEX   { acdPaaUdpCfgID }
    ::=  { acdPaaUdpCfgTable 1 }


AcdPaaUdpCfgEntry ::= SEQUENCE {
    acdPaaUdpCfgID                      Unsigned32,
    acdPaaUdpCfgName                    DisplayString,
    acdPaaUdpCfgState                   INTEGER,
    acdPaaUdpCfgPktSize                 Unsigned32,
    acdPaaUdpCfgSamplingPeriod          Unsigned32,
    acdPaaUdpCfgCcLossThresh            Unsigned32,
    acdPaaUdpCfgPktLossRefPeriod        Unsigned32,
    acdPaaUdpCfgPktLossThresh           Unsigned32,
    acdPaaUdpCfgOneWayRefPeriod         Unsigned32,
    acdPaaUdpCfgOneWayDvMax             Unsigned32,
    acdPaaUdpCfgOneWayDvThresh          Unsigned32,
    acdPaaUdpCfgOneWayAvgDvThresh       Unsigned32,
    acdPaaUdpCfgTwoWayRefPeriod         Unsigned32,
    acdPaaUdpCfgTwoWayDelayMax          Unsigned32,
    acdPaaUdpCfgTwoWayDelayThresh       Unsigned32,
    acdPaaUdpCfgTwoWayAvgDelayThresh    Unsigned32,
    acdPaaUdpCfgTwoWayDvMax             Unsigned32,
    acdPaaUdpCfgTwoWayDvThresh          Unsigned32,
    acdPaaUdpCfgTwoWayAvgDvThresh       Unsigned32,
    acdPaaUdpCfgIPv4DstAddr             IpAddress,
    acdPaaUdpCfgPortNumber              Unsigned32,
    acdPaaUdpCfgDscpValue               Unsigned32,
    acdPaaUdpCfgVlan1PbitsValue         Unsigned32,
    acdPaaUdpCfgVlan2PbitsValue         Unsigned32,
    acdPaaUdpCfgOneWayDelayMax          Unsigned32,
    acdPaaUdpCfgOneWayDelayThresh       Unsigned32,
    acdPaaUdpCfgOneWayAvgDelayThresh    Unsigned32,
    acdPaaUdpCfgDestinationPortNumber   Unsigned32,
    acdPaaUdpCfgPeerID                  Unsigned32,
    acdPaaUdpCfgOperationMode           Unsigned32,
    acdPaaUdpCfgIgmpOneWayJoinPeriod    Unsigned32,
    acdPaaUdpCfgIgmpRefPeriod           Unsigned32,
    acdPaaUdpCfgIgmpMaxJoinDly          Unsigned32,
    acdPaaUdpCfgIgmpJoinDlyThres        Unsigned32,
    acdPaaUdpCfgIgmpJoinAvgDlyThres     Unsigned32,
    acdPaaUdpCfgIgmpMaxLvDly            Unsigned32,
    acdPaaUdpCfgIgmpLvDlyThresh         Unsigned32,
    acdPaaUdpCfgIgmpLvAvgDlyThresh      Unsigned32,
    acdPaaUdpCfgPktLossThreshExt        Unsigned32
}

acdPaaUdpCfgID  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Unique value for each PAA instance. This value follows the ordering
         of the status and the results table. Its value ranges from 1 to
         MAXINT (4 bytes)."
    ::= { acdPaaUdpCfgEntry 1 }

acdPaaUdpCfgName  OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..32))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is a string to identify this PAA instance."
    ::= { acdPaaUdpCfgEntry 2 }

acdPaaUdpCfgState  OBJECT-TYPE
    SYNTAX      INTEGER {
                    enable(0),
                    disable(1)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Configuration state of this PAA entry."
    ::= { acdPaaUdpCfgEntry 3 }

acdPaaUdpCfgPktSize  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Transmit packet size."
    ::= { acdPaaUdpCfgEntry 4 }

acdPaaUdpCfgSamplingPeriod  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Interval in milliseconds at which PAA issues PAA measurement packets."
    ::= { acdPaaUdpCfgEntry 5 }

acdPaaUdpCfgCcLossThresh  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS   current
    DESCRIPTION
        "Maximum number of lost CCM (Connectivity Check Messages) for declaring a connectvity loss."
    ::= { acdPaaUdpCfgEntry 6 }

acdPaaUdpCfgPktLossRefPeriod  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Reference period in milliseconds for packet loss measurement."
    ::= { acdPaaUdpCfgEntry 7 }

acdPaaUdpCfgPktLossThresh  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Allowed packet loss, in pecentage (%)."
    ::= { acdPaaUdpCfgEntry 8 }

acdPaaUdpCfgOneWayRefPeriod  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Reference period in milliseconds for one-way measurement."
    ::= { acdPaaUdpCfgEntry 9 }

acdPaaUdpCfgOneWayDvMax  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Maximum allowed instantaneous delay variation."
    ::= { acdPaaUdpCfgEntry 10 }

acdPaaUdpCfgOneWayDvThresh  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Number of consecutive delay variations greater than the threshold."
    ::= { acdPaaUdpCfgEntry 11 }

acdPaaUdpCfgOneWayAvgDvThresh  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "One-way average delay variation threshold."
    ::= { acdPaaUdpCfgEntry 12 }

acdPaaUdpCfgTwoWayRefPeriod  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Reference period in milliseconds for two-way measurement."
    ::= { acdPaaUdpCfgEntry 13 }

acdPaaUdpCfgTwoWayDelayMax  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Maximum allowed instantaneous delay."
    ::= { acdPaaUdpCfgEntry 14 }

acdPaaUdpCfgTwoWayDelayThresh  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Number of consecutive delays greater than the threshold."
    ::= { acdPaaUdpCfgEntry 15 }

acdPaaUdpCfgTwoWayAvgDelayThresh  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Two-way average delay threshold."
    ::= { acdPaaUdpCfgEntry 16 }

acdPaaUdpCfgTwoWayDvMax  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Maximum allowed instantaneous delay variation."
    ::= { acdPaaUdpCfgEntry 17 }

acdPaaUdpCfgTwoWayDvThresh  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Number of consecutive delay variations greater than the threshold."
    ::= { acdPaaUdpCfgEntry 18 }

acdPaaUdpCfgTwoWayAvgDvThresh  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Two-way average delay variation threshold."
    ::= { acdPaaUdpCfgEntry 19 }

acdPaaUdpCfgIPv4DstAddr  OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The destination IP address used to reach the peer PAA instance."
    ::= { acdPaaUdpCfgEntry 20 }

acdPaaUdpCfgPortNumber  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The source UDP port number on which to listen for peer PAA samples."
    ::= { acdPaaUdpCfgEntry 21 }

acdPaaUdpCfgDscpValue  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "The DSCP value used to reach the peer PAA instance. Its value ranges
            from 0 to 64."
    ::= { acdPaaUdpCfgEntry 22 }

acdPaaUdpCfgVlan1PbitsValue OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "The first VLAN priority used to tag the outgoing traffic.
             Its value ranges from 0 to 7."
    ::= { acdPaaUdpCfgEntry 23 }

acdPaaUdpCfgVlan2PbitsValue OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The second VLAN priority used to tag the outgoing traffic.
             Its value ranges from 0 to 7."
    ::= { acdPaaUdpCfgEntry 24 }

acdPaaUdpCfgOneWayDelayMax  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Maximum allowed instantaneous delay."
    ::= { acdPaaUdpCfgEntry 25 }

acdPaaUdpCfgOneWayDelayThresh  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Nbr consecutive delay > max before alert."
    ::= { acdPaaUdpCfgEntry 26 }

acdPaaUdpCfgOneWayAvgDelayThresh  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Two-way average delay threshold."
    ::= { acdPaaUdpCfgEntry 27 }

acdPaaUdpCfgDestinationPortNumber  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The destination UDP port number used to reach the peer PAA instance."
    ::= { acdPaaUdpCfgEntry 28 }

acdPaaUdpCfgPeerID  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Unique value for the peer PAA instance. This value follows the ordering
         of the status and the results table. Its value ranges from 1 to
         MAXINT (4 bytes)."
    ::= { acdPaaUdpCfgEntry 29 }

acdPaaUdpCfgOperationMode  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "PAA Operation Mode. Its values are: 1 = Bi-Dir, 2 = Source, 3 = Sink"
    ::= { acdPaaUdpCfgEntry 30 }

acdPaaUdpCfgIgmpOneWayJoinPeriod  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The IGMP One-way join period is the amount of time to wait from the
         beginning of the period before an IGMP join request is sent out."
    ::= { acdPaaUdpCfgEntry 31 }

acdPaaUdpCfgIgmpRefPeriod  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The IGMP reference period is the total amount of time in which we
         sample IGMP join and leave requests. It must be a minimum of (10 * One-way ref. period)."
    ::= { acdPaaUdpCfgEntry 32 }

acdPaaUdpCfgIgmpMaxJoinDly  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The maximum join delay objective."
    ::= { acdPaaUdpCfgEntry 33 }

acdPaaUdpCfgIgmpJoinDlyThres  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The maximum consecutive join delay samples allowed greater than the maximum join delay."
    ::= { acdPaaUdpCfgEntry 34 }

acdPaaUdpCfgIgmpJoinAvgDlyThres  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The maximum join average delay."
    ::= { acdPaaUdpCfgEntry 35 }

acdPaaUdpCfgIgmpMaxLvDly  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The maximum join delay objective."
    ::= { acdPaaUdpCfgEntry 36 }

acdPaaUdpCfgIgmpLvDlyThresh  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The maximum consecutive leave delay samples allowed greater than the maximum leave delay."
    ::= { acdPaaUdpCfgEntry 37 }


acdPaaUdpCfgIgmpLvAvgDlyThresh  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The maximum leave delay average."
    ::= { acdPaaUdpCfgEntry 38 }

acdPaaUdpCfgPktLossThreshExt  OBJECT-TYPE
    SYNTAX      Unsigned32 (0..100000000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Extended packet loss ratio threshold allowed without issuing an alarm
         expressed in millionth of percent (1,000,000 is 1%)."
     DEFVAL      { 0 }
    ::= { acdPaaUdpCfgEntry 39 }


---------------------------------------------------------------------------
 -- The L2 PAA configuration table
 -- This table contains all L2 PAA entry configurations.
---------------------------------------------------------------------------

acdPaaL2CfgTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AcdPaaL2CfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Configuration table of all L2 PAA entries"
    ::= { acdPaa 4 }

acdPaaL2CfgEntry OBJECT-TYPE
    SYNTAX      AcdPaaL2CfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry consisting of all settings to manage a PAA instance."
    INDEX   { acdPaaL2CfgID }
    ::=  { acdPaaL2CfgTable 1 }


AcdPaaL2CfgEntry ::= SEQUENCE {
    acdPaaL2CfgID                      Unsigned32,
    acdPaaL2CfgName                    DisplayString,
    acdPaaL2CfgState                   INTEGER,
    acdPaaL2CfgPktSize                 Unsigned32,
    acdPaaL2CfgSamplingPeriod          Unsigned32,
    acdPaaL2CfgCcLossThresh            Unsigned32,
    acdPaaL2CfgPktLossRefPeriod        Unsigned32,
    acdPaaL2CfgPktLossThresh           Unsigned32,
    acdPaaL2CfgOneWayRefPeriod         Unsigned32,
    acdPaaL2CfgOneWayDvMax             Unsigned32,
    acdPaaL2CfgOneWayDvThresh          Unsigned32,
    acdPaaL2CfgOneWayAvgDvThresh       Unsigned32,
    acdPaaL2CfgTwoWayRefPeriod         Unsigned32,
    acdPaaL2CfgTwoWayDelayMax          Unsigned32,
    acdPaaL2CfgTwoWayDelayThresh       Unsigned32,
    acdPaaL2CfgTwoWayAvgDelayThresh    Unsigned32,
    acdPaaL2CfgTwoWayDvMax             Unsigned32,
    acdPaaL2CfgTwoWayDvThresh          Unsigned32,
    acdPaaL2CfgTwoWayAvgDvThresh       Unsigned32,
    acdPaaL2CfgPortName                DisplayString,
    acdPaaL2CfgMacDst                  MacAddress,
    acdPaaL2CfgEtype                   Unsigned32,
    acdPaaL2CfgVlan1IdEn               TruthValue,
    acdPaaL2CfgVlan1Id                 Unsigned32,
    acdPaaL2CfgVlan2IdEn               TruthValue,
    acdPaaL2CfgVlan2Id                 Unsigned32,
    acdPaaL2CfgVlan1PbitsValue         Unsigned32,
    acdPaaL2CfgVlan2PbitsValue         Unsigned32,
    acdPaaL2CfgOneWayDelayMax          Unsigned32,
    acdPaaL2CfgOneWayDelayThresh       Unsigned32,
    acdPaaL2CfgOneWayAvgDelayThresh    Unsigned32,
    acdPaaL2CfgPeerID                  Unsigned32,
    acdPaaL2CfgOperationMode           Unsigned32,
    acdPaaL2CfgPktLossThreshExt        Unsigned32
}

acdPaaL2CfgID  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Unique value for each PAA instance. This value follows the ordering
         of the status and the results table. Its value ranges from 1 to
         MAXINT (4 bytes)."
    ::= { acdPaaL2CfgEntry 1 }

acdPaaL2CfgName  OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..32))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is a string to identify this PAA instance."
    ::= { acdPaaL2CfgEntry 2 }

acdPaaL2CfgState  OBJECT-TYPE
    SYNTAX      INTEGER {
                    enable(0),
                    disable(1)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Configuration state of this PAA entry."
    ::= { acdPaaL2CfgEntry 3 }

acdPaaL2CfgPktSize  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Transmit packet size."
    ::= { acdPaaL2CfgEntry 4 }

acdPaaL2CfgSamplingPeriod  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Interval in milliseconds at which PAA issues PAA measurement packets."
    ::= { acdPaaL2CfgEntry 5 }

acdPaaL2CfgCcLossThresh  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Maximum number of lost CCM (Connectivity Check Messages) for declaring a connectvity loss."
    ::= { acdPaaL2CfgEntry 6 }

acdPaaL2CfgPktLossRefPeriod  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Reference period in milliseconds for packet loss measurement."
    ::= { acdPaaL2CfgEntry 7 }

acdPaaL2CfgPktLossThresh  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Allowed packet loss, in percentage (%)."
    ::= { acdPaaL2CfgEntry 8 }

acdPaaL2CfgOneWayRefPeriod  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Reference period in milliseconds for one-way measurement."
    ::= { acdPaaL2CfgEntry 9 }

acdPaaL2CfgOneWayDvMax  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Maximum allowed instantaneous delay variation."
    ::= { acdPaaL2CfgEntry 10 }

acdPaaL2CfgOneWayDvThresh  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Number of consecutive delay variations greater than the threshold."
    ::= { acdPaaL2CfgEntry 11 }

acdPaaL2CfgOneWayAvgDvThresh  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "One-way average delay variation threshold."
    ::= { acdPaaL2CfgEntry 12 }

acdPaaL2CfgTwoWayRefPeriod  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Reference period in milliseconds for two-way measurement."
    ::= { acdPaaL2CfgEntry 13 }

acdPaaL2CfgTwoWayDelayMax  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Maximum allowed instantaneous delay."
    ::= { acdPaaL2CfgEntry 14 }

acdPaaL2CfgTwoWayDelayThresh  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Number of consecutive delays greater than the threshold."
    ::= { acdPaaL2CfgEntry 15 }

acdPaaL2CfgTwoWayAvgDelayThresh  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Two-way average delay threshold."
    ::= { acdPaaL2CfgEntry 16 }

acdPaaL2CfgTwoWayDvMax  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Maximum allowed instantaneous delay variation."
    ::= { acdPaaL2CfgEntry 17 }

acdPaaL2CfgTwoWayDvThresh  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Number of consecutive delay variations greater than the threshold."
    ::= { acdPaaL2CfgEntry 18 }

acdPaaL2CfgTwoWayAvgDvThresh  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Two-way average delay variation threshold."
    ::= { acdPaaL2CfgEntry 19 }

acdPaaL2CfgPortName  OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..32)) 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The Port Name used to reach the peer PAA instance."
    ::= { acdPaaL2CfgEntry 20 }

acdPaaL2CfgMacDst OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The MAC address used to reach the peer PAA instance."
    ::= { acdPaaL2CfgEntry 21 }

acdPaaL2CfgEtype  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The Ethernet type used for this PAA instance."
    ::= { acdPaaL2CfgEntry 22 }

acdPaaL2CfgVlan1IdEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enable or disable the first VLAN ID check"
    ::= { acdPaaL2CfgEntry 23 }

acdPaaL2CfgVlan1Id OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The first VLAN ID used to compare the incoming PAA traffic.
             Its value ranges from 0 to 4095."
    ::= { acdPaaL2CfgEntry 24 }

acdPaaL2CfgVlan2IdEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enable or disable the second VLAN ID check"
    ::= { acdPaaL2CfgEntry 25 }

acdPaaL2CfgVlan2Id OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The second VLAN ID used to compare the incoming PAA traffic.
             Its value ranges from 0 to 4095."
    ::= { acdPaaL2CfgEntry 26 }

acdPaaL2CfgVlan1PbitsValue OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The first VLAN priority used to tag the outgoing traffic.
             Its value ranges from 0 to 7."
    ::= { acdPaaL2CfgEntry 27 }

acdPaaL2CfgVlan2PbitsValue OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The second VLAN priority used to tag the outgoing traffic.
             Its value ranges from 0 to 7."
    ::= { acdPaaL2CfgEntry 28 }

acdPaaL2CfgOneWayDelayMax  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Maximum allowed instantaneous delay."
    ::= { acdPaaL2CfgEntry 29 }

acdPaaL2CfgOneWayDelayThresh  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Nbr consecutive delay > max before alert."
    ::= { acdPaaL2CfgEntry 30 }

acdPaaL2CfgOneWayAvgDelayThresh  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "One-way average delay threshold."
    ::= { acdPaaL2CfgEntry 31 }

acdPaaL2CfgPeerID  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Unique value for the peer PAA instance. This value follows the ordering
         of the status and the results table. Its value ranges from 1 to
         MAXINT (4 bytes)."
    ::= { acdPaaL2CfgEntry 32 }

acdPaaL2CfgOperationMode  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "PAA Operation Mode. Its values are: 1 = Bi-Dir, 2 = Source, 3 = Sink"
    ::= { acdPaaL2CfgEntry 33 }

acdPaaL2CfgPktLossThreshExt  OBJECT-TYPE
    SYNTAX      Unsigned32 (0..100000000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Extended packet loss ratio threshold allowed without issuing an alarm
         expressed in millionth of percent (1,000,000 is 1%)."
     DEFVAL      { 0 }
    ::= { acdPaaL2CfgEntry 34 }

------------------------------------------------------------------------
 -- The PAA history Results table
 -- This table contains all PAA entry results.
---------------------------------------------------------------------------

acdPaaHistResultTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AcdPaaHistResultEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Result table of all Paa entries"
    ::= { acdPaa 5 }

acdPaaHistResultEntry OBJECT-TYPE
    SYNTAX      AcdPaaHistResultEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry consisting of results for a PAA instance for a specific
         periodin time."
    INDEX   { acdPaaHistResultID , acdPaaHistResultSampleIndex }
    ::=  { acdPaaHistResultTable 1 }


AcdPaaHistResultEntry ::= SEQUENCE {
    acdPaaHistResultID                  Unsigned32,
    acdPaaHistResultSampleIndex         Unsigned32,
    acdPaaHistResultStatus              INTEGER,
    acdPaaHistResultDuration            Unsigned32,
    acdPaaHistResultIntervalEnd         DateAndTime,
    acdPaaHistResultPktLossNeValid      TruthValue,
    acdPaaHistResultPktLossNeSamples    Unsigned32,
    acdPaaHistResultPktLossNeValue      Unsigned32,
    acdPaaHistResultPktLossFeValid      TruthValue,
    acdPaaHistResultPktLossFeSamples    Unsigned32,
    acdPaaHistResultPktLossFeValue      Unsigned32,
    acdPaaHistResultOneWayDelayValid    TruthValue,
    acdPaaHistResultOneWayDelaySamples  Unsigned32,
    acdPaaHistResultOneWayDelayMinValue Integer32,
    acdPaaHistResultOneWayDelayMaxValue Integer32,
    acdPaaHistResultOneWayDelayAvgValue Integer32,
    acdPaaHistResultOneWayDelayThreshEx Unsigned32,
    acdPaaHistResultOneWayDvValid       TruthValue,
    acdPaaHistResultOneWayDvSamples     Unsigned32,
    acdPaaHistResultOneWayDvMinValue    Integer32,
    acdPaaHistResultOneWayDvMaxValue    Integer32,
    acdPaaHistResultOneWayDvAvgValue    Integer32,
    acdPaaHistResultOneWayDvThreshEx    Unsigned32,
    acdPaaHistResultTwoWayDelayValid    TruthValue,
    acdPaaHistResultTwoWayDelaySamples  Unsigned32,
    acdPaaHistResultTwoWayDelayMinValue Integer32,
    acdPaaHistResultTwoWayDelayMaxValue Integer32,
    acdPaaHistResultTwoWayDelayAvgValue Integer32,
    acdPaaHistResultTwoWayDelayThreshEx Unsigned32,
    acdPaaHistResultTwoWayDvValid       TruthValue,
    acdPaaHistResultTwoWayDvSamples     Unsigned32,
    acdPaaHistResultTwoWayDvMinValue    Integer32,
    acdPaaHistResultTwoWayDvMaxValue    Integer32,
    acdPaaHistResultTwoWayDvAvgValue    Integer32,
    acdPaaHistResultTwoWayDvThreshEx    Unsigned32,
    acdPaaHistResultIgmpJoinDelayValid     TruthValue,
    acdPaaHistResultIgmpJoinDelaySamples   Unsigned32,
    acdPaaHistResultIgmpJoinDelayMinValue  Integer32,
    acdPaaHistResultIgmpJoinDelayMaxValue  Integer32,
    acdPaaHistResultIgmpJoinDelayAvgValue  Integer32,
    acdPaaHistResultIgmpJoinDelayThreshEx  Unsigned32,
    acdPaaHistResultIgmpLeaveDelayValid    TruthValue,
    acdPaaHistResultIgmpLeaveDelaySamples  Unsigned32,
    acdPaaHistResultIgmpLeaveDelayMinValue Integer32,
    acdPaaHistResultIgmpLeaveDelayMaxValue Integer32,
    acdPaaHistResultIgmpLeaveDelayAvgValue Integer32,
    acdPaaHistResultIgmpLeaveDelayThreshEx Unsigned32,
    acdPaaHistResultPktLossNeValueExt      Unsigned32,
    acdPaaHistResultPktLossFeValueExt      Unsigned32,
    acdPaaHistResultPktLossNeNbrLoss       Unsigned32,
    acdPaaHistResultPktLossFeNbrLoss       Unsigned32
}

acdPaaHistResultID  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Unique value for each PAA instance. Its value ranges from 1 to
        MAXINT (4 bytes). "
    ::= { acdPaaHistResultEntry 1 }

acdPaaHistResultSampleIndex  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An index that uniquely identifies the particular sample this entry
         represents among all samples associated with the same PAA instance.
         This index starts at 1 and increases by one as each new sample."
    ::= { acdPaaHistResultEntry 2 }

acdPaaHistResultStatus OBJECT-TYPE
    SYNTAX      INTEGER {
                    valid(1),
                    invalid(2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The status of this acdPaaHistResult entry."
    ::= { acdPaaHistResultEntry 3 }

acdPaaHistResultDuration  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The interval in seconds over which the data is sampled for this entry."
    ::= { acdPaaHistResultEntry 4 }

acdPaaHistResultIntervalEnd OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This is the time of the end of this entry."
    ::= { acdPaaHistResultEntry 5 }

acdPaaHistResultPktLossNeValid  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the validity of the Near-end packet loss results during
         this sampling interval."
    ::= { acdPaaHistResultEntry 6 }

acdPaaHistResultPktLossNeSamples  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of samples gathered during the sampling
         interval to calculate the Near-end packet loss."
    ::= { acdPaaHistResultEntry 7 }

acdPaaHistResultPktLossNeValue  OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the Near-end packet loss during this sampling interval.
         The packet loss is the percent of packets transmitted but not
         received of the Ethernet segment in hundredths of a percent."
    ::= { acdPaaHistResultEntry 8 }

acdPaaHistResultPktLossFeValid  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the validity of the Far-end packet loss results during
         this sampling interval."
    ::= { acdPaaHistResultEntry 9 }

acdPaaHistResultPktLossFeSamples  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of samples gathered during the sampling
         interval to calculate the Far-end packet loss."
    ::= { acdPaaHistResultEntry 10 }

acdPaaHistResultPktLossFeValue  OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the Far-end packet loss during this sampling interval.
         The packet loss is the percent of packets transmitted but not
         received of the Ethernet segment in hundredths of a percent."
    ::= { acdPaaHistResultEntry 11 }

acdPaaHistResultOneWayDelayValid  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicate the validity of the One-way delay results during this
         sampling interval."
    ::= { acdPaaHistResultEntry 12 }

acdPaaHistResultOneWayDelaySamples  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of samples gathered during the sampling
         interval to calculate One-way delay results."
    ::= { acdPaaHistResultEntry 13 }

acdPaaHistResultOneWayDelayMinValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicate the One-way delay minimum value during this sampling
         interval. The value is expressed in micro-seconds."
    ::= { acdPaaHistResultEntry 14 }

acdPaaHistResultOneWayDelayMaxValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicate the One-way delay maximum value during this sampling
         interval. The value is expressed in micro-seconds."
    ::= { acdPaaHistResultEntry 15 }

acdPaaHistResultOneWayDelayAvgValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicate the One-way delay average value during this sampling
         interval. The value is expressed in micro-seconds."
    ::= { acdPaaHistResultEntry 16 }

acdPaaHistResultOneWayDelayThreshEx  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicate the number of sample exceeding the limit during this
         sampling interval."
    ::= { acdPaaHistResultEntry 17 }

acdPaaHistResultOneWayDvValid  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the validity of the One-way delay variation results
         during this sampling interval."
    ::= { acdPaaHistResultEntry 18 }

acdPaaHistResultOneWayDvSamples  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of samples gathered during the sampling
         interval to calculate One-way delay variation results."
    ::= { acdPaaHistResultEntry 19 }

acdPaaHistResultOneWayDvMinValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the One-way delay variation minimum value during this
         sampling interval. The value is expressed in micro-seconds."
    ::= { acdPaaHistResultEntry 20 }

acdPaaHistResultOneWayDvMaxValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the One-way delay variation maximum value during this
         sampling interval. The value is expressed in micro-seconds."
    ::= { acdPaaHistResultEntry 21 }

acdPaaHistResultOneWayDvAvgValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the One-way delay variation average value during this
         sampling interval. The value is expressed in micro-seconds."
    ::= { acdPaaHistResultEntry 22 }

acdPaaHistResultOneWayDvThreshEx  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of samples exceeding the limit during this
         sampling interval."
    ::= { acdPaaHistResultEntry 23 }

acdPaaHistResultTwoWayDelayValid  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the validity of the Two-way delay results during this
         sampling interval."
    ::= { acdPaaHistResultEntry 24 }

acdPaaHistResultTwoWayDelaySamples  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of samples gathered during the sampling
         interval to calculate Two-way delay results."
    ::= { acdPaaHistResultEntry 25 }

acdPaaHistResultTwoWayDelayMinValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the Two-way delay minimum value during this sampling
         interval. The value is expressed in micro-seconds."
    ::= { acdPaaHistResultEntry 26 }

acdPaaHistResultTwoWayDelayMaxValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the Two-way delay maximum value during this sampling
         interval. The value is expressed in micro-seconds."
    ::= { acdPaaHistResultEntry 27 }

acdPaaHistResultTwoWayDelayAvgValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the Two-way delay average value during this sampling
         interval. The value is expressed in micro-seconds."
    ::= { acdPaaHistResultEntry 28 }

acdPaaHistResultTwoWayDelayThreshEx  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of samples exceeding the limit during this
         sampling interval."
    ::= { acdPaaHistResultEntry 29 }

acdPaaHistResultTwoWayDvValid  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the validity of the Two-way delay variation results during
         this sampling interval."
    ::= { acdPaaHistResultEntry 30 }

acdPaaHistResultTwoWayDvSamples  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of samples gathered during the sampling
         interval to calculate Two-way delay variation results."
    ::= { acdPaaHistResultEntry 31 }

acdPaaHistResultTwoWayDvMinValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the Two-way delay variation minimum value during this
         sampling interval. The value is expressed in micro-seconds."
    ::= { acdPaaHistResultEntry 32 }

acdPaaHistResultTwoWayDvMaxValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the Two-way delay variation maximum value during this
         sampling interval. The value is expressed in micro-seconds."
    ::= { acdPaaHistResultEntry 33 }

acdPaaHistResultTwoWayDvAvgValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the Two-way delay variation average value during this
         sampling interval. The value is expressed in micro-seconds."
    ::= { acdPaaHistResultEntry 34 }

acdPaaHistResultTwoWayDvThreshEx  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of samples exceeding the limit during this
         sampling interval."
    ::= { acdPaaHistResultEntry 35 }

acdPaaHistResultIgmpJoinDelayValid  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the validity of the IGMP Join delay results during this
         sampling interval."
    ::= { acdPaaHistResultEntry 36 }

acdPaaHistResultIgmpJoinDelaySamples  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of samples gathered during the sampling
         interval to calculate IGMP Join delay results."
    ::= { acdPaaHistResultEntry 37 }

acdPaaHistResultIgmpJoinDelayMinValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the IGMP Join delay minimum value during this sampling
         interval. The value is expressed in micro-seconds."
    ::= { acdPaaHistResultEntry 38 }

acdPaaHistResultIgmpJoinDelayMaxValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the IGMP Join delay maximum value during this sampling
         interval. The value is expressed in micro-seconds."
    ::= { acdPaaHistResultEntry 39 }

acdPaaHistResultIgmpJoinDelayAvgValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the IGMP Join delay average value during this sampling
         interval. The value is expressed in micro-seconds."
    ::= { acdPaaHistResultEntry 40 }

acdPaaHistResultIgmpJoinDelayThreshEx  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of IGMP Join samples exceeding the limit during this
         sampling interval."
    ::= { acdPaaHistResultEntry 41 }

acdPaaHistResultIgmpLeaveDelayValid  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the validity of the IGMP Leave delay results during this
         sampling interval."
    ::= { acdPaaHistResultEntry 42 }

acdPaaHistResultIgmpLeaveDelaySamples  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of samples gathered during the sampling
         interval to calculate IGMP Leave delay results."
    ::= { acdPaaHistResultEntry 43 }

acdPaaHistResultIgmpLeaveDelayMinValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the IGMP Leave delay minimum value during this sampling
         interval. The value is expressed in micro-seconds."
    ::= { acdPaaHistResultEntry 44 }

acdPaaHistResultIgmpLeaveDelayMaxValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the IGMP Leave delay maximum value during this sampling
         interval. The value is expressed in micro-seconds."
    ::= { acdPaaHistResultEntry 45 }

acdPaaHistResultIgmpLeaveDelayAvgValue  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the IGMP Leave delay average value during this sampling
         interval. The value is expressed in micro-seconds."
    ::= { acdPaaHistResultEntry 46 }

acdPaaHistResultIgmpLeaveDelayThreshEx  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of IGMP Leave samples exceeding the limit during this
         sampling interval."
    ::= { acdPaaHistResultEntry 47 }

acdPaaHistResultPktLossNeValueExt  OBJECT-TYPE
    SYNTAX      Unsigned32 (0..100000000)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Extended near-end packet loss ratio. The packet loss is the percent
         of packets transmitted but not received in millionth of a percent
         (1,000,000 is 1%)."

    ::= { acdPaaHistResultEntry 48 }

acdPaaHistResultPktLossFeValueExt  OBJECT-TYPE
    SYNTAX      Unsigned32 (0..100000000)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Extended far-end packet loss ratio. The packet loss is the percent
         of packets transmitted but not received in millionth of a percent
         (1,000,000 is 1%)."

    ::= { acdPaaHistResultEntry 49 }

acdPaaHistResultPktLossNeNbrLoss  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of near-end packet lost for the period.
         This should be less or equal to acdPaaHistResultPktLossNeSamples."
    ::= { acdPaaHistResultEntry 50 }

acdPaaHistResultPktLossFeNbrLoss  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the number of far-end packet lost for the period.
         This should be less or equal to acdPaaHistResultPktLossNeSamples."
    ::= { acdPaaHistResultEntry 51 }

---------------------------------------------------------------------------
 -- ACD-PAA-MIB Module - Conformance Information
---------------------------------------------------------------------------

acdPaaCompliances  OBJECT IDENTIFIER ::= { acdPaaConformance 1 }
acdPaaGroups       OBJECT IDENTIFIER ::= { acdPaaConformance 2 }

---------------------------------------------------------------------------
 -- Units of conformance
---------------------------------------------------------------------------

acdPaaResultGroup OBJECT-GROUP
    OBJECTS {
        acdPaaResultState,
        acdPaaResultPktLossNeCurrValid,
        acdPaaResultPktLossNeCurrValue,
        acdPaaResultPktLossNePrevValid,
        acdPaaResultPktLossNePrevValue,
        acdPaaResultPktLossFeCurrValid,
        acdPaaResultPktLossFeCurrValue,
        acdPaaResultPktLossFePrevValid,
        acdPaaResultPktLossFePrevValue,
        acdPaaResultOneWayDvInstValue,
        acdPaaResultOneWayDvCurrValid,
        acdPaaResultOneWayDvCurrMinValue,
        acdPaaResultOneWayDvCurrMaxValue,
        acdPaaResultOneWayDvCurrAvgValue,
        acdPaaResultOneWayDvCurrThreshExc,
        acdPaaResultOneWayDvPrevValid,
        acdPaaResultOneWayDvPrevMinValue,
        acdPaaResultOneWayDvPrevMaxValue,
        acdPaaResultOneWayDvPrevAvgValue,
        acdPaaResultOneWayDvPrevThreshEx,
        acdPaaResultTwoWayDelayInstValue,
        acdPaaResultTwoWayDelayCurrValid,
        acdPaaResultTwoWayDelayCurrMinValue,
        acdPaaResultTwoWayDelayCurrMaxValue,
        acdPaaResultTwoWayDelayCurrAvgValue,
        acdPaaResultTwoWayDelayCurrThreshEx,
        acdPaaResultTwoWayDelayPrevValid,
        acdPaaResultTwoWayDelayPrevMinValue,
        acdPaaResultTwoWayDelayPrevMaxValue,
        acdPaaResultTwoWayDelayPrevAvgValue,
        acdPaaResultTwoWayDelayPrevThreshEx,
        acdPaaResultTwoWayDvInstValue,
        acdPaaResultTwoWayDvCurrValid,
        acdPaaResultTwoWayDvCurrMinValue,
        acdPaaResultTwoWayDvCurrMaxValue,
        acdPaaResultTwoWayDvCurrAvgValue,
        acdPaaResultTwoWayDvCurrThreshEx,
        acdPaaResultTwoWayDvPrevValid,
        acdPaaResultTwoWayDvPrevMinValue,
        acdPaaResultTwoWayDvPrevMaxValue,
        acdPaaResultTwoWayDvPrevAvgValue,
        acdPaaResultTwoWayDvPrevThreshEx,
        acdPaaResultOneWayDelayInstValue,
        acdPaaResultOneWayDelayCurrValid,
        acdPaaResultOneWayDelayCurrMinValue,
        acdPaaResultOneWayDelayCurrMaxValue,
        acdPaaResultOneWayDelayCurrAvgValue,
        acdPaaResultOneWayDelayCurrThreshEx,
        acdPaaResultOneWayDelayPrevValid,
        acdPaaResultOneWayDelayPrevMinValue,
        acdPaaResultOneWayDelayPrevMaxValue,
        acdPaaResultOneWayDelayPrevAvgValue,
        acdPaaResultOneWayDelayPrevThreshEx,
        acdPaaResultPktLossTime,
        acdPaaResultOneWayTime,
        acdPaaResultTwoWayTime,
        acdPaaResultPktLossNeCurrSamples,
        acdPaaResultPktLossNePrevSamples,
        acdPaaResultPktLossFeCurrSamples,
        acdPaaResultPktLossFePrevSamples,
        acdPaaResultOneWayDelayCurrSamples,
        acdPaaResultOneWayDelayPrevSamples,
        acdPaaResultOneWayDvCurrSamples,
        acdPaaResultOneWayDvPrevSamples,
        acdPaaResultTwoWayDelayCurrSamples,
        acdPaaResultTwoWayDelayPrevSamples,
        acdPaaResultTwoWayDvCurrSamples,
        acdPaaResultTwoWayDvPrevSamples,
        acdPaaResultIgmpJoinDelayInstValue,
        acdPaaResultIgmpJoinDelayCurrValid,
        acdPaaResultIgmpJoinDelayCurrMinValue,
        acdPaaResultIgmpJoinDelayCurrMaxValue,
        acdPaaResultIgmpJoinDelayCurrAvgValue,
        acdPaaResultIgmpJoinDelayCurrThreshEx,
        acdPaaResultIgmpJoinDelayPrevValid,
        acdPaaResultIgmpJoinDelayPrevMinValue,
        acdPaaResultIgmpJoinDelayPrevMaxValue,
        acdPaaResultIgmpJoinDelayPrevAvgValue,
        acdPaaResultIgmpJoinDelayPrevThreshEx,
        acdPaaResultIgmpLeaveDelayInstValue,
        acdPaaResultIgmpLeaveDelayCurrValid,
        acdPaaResultIgmpLeaveDelayCurrMinValue,
        acdPaaResultIgmpLeaveDelayCurrMaxValue,
        acdPaaResultIgmpLeaveDelayCurrAvgValue,
        acdPaaResultIgmpLeaveDelayCurrThreshEx,
        acdPaaResultIgmpLeaveDelayPrevValid,
        acdPaaResultIgmpLeaveDelayPrevMinValue,
        acdPaaResultIgmpLeaveDelayPrevMaxValue,
        acdPaaResultIgmpLeaveDelayPrevAvgValue,
        acdPaaResultIgmpLeaveDelayPrevThreshEx,
        acdPaaResultIgmpJoinDelayTime,
        acdPaaResultIgmpLeaveDelayTime,
        acdPaaResultIgmpJoinDelayCurrSamples,
        acdPaaResultIgmpJoinDelayPrevSamples,
        acdPaaResultIgmpLeaveDelayCurrSamples,
        acdPaaResultIgmpLeaveDelayPrevSamples,
        acdPaaResultPktLossCurrGaps,
        acdPaaResultPktLossPrevGaps,
        acdPaaResultPktLossCurrLargestGap,
        acdPaaResultPktLossPrevLargestGap,
        acdPaaResultPktLossNeCurrValueExt,
        acdPaaResultPktLossNePrevValueExt,
        acdPaaResultPktLossFeCurrValueExt,
        acdPaaResultPktLossFePrevValueExt,
        acdPaaResultPktLossNeCurrNbrLoss,
        acdPaaResultPktLossNePrevNbrLoss,
        acdPaaResultPktLossFeCurrNbrLoss,
        acdPaaResultPktLossFePrevNbrLoss
    }
    STATUS      current
    DESCRIPTION
       "Objects for the PAA result Group."
    ::= { acdPaaGroups 1 }

acdPaaStatusGroup OBJECT-GROUP
    OBJECTS {
        acdPaaStatusCcAlert,
        acdPaaStatusPktLossAlert,
        acdPaaStatusOneWayDelayAlert,
        acdPaaStatusOneWayAvgDelayAlert,
        acdPaaStatusOneWayDvAlert,
        acdPaaStatusOneWayAvgDvAlert,
        acdPaaStatusTwoWayDelayAlert,
        acdPaaStatusTwoWayAvgDelayAlert,
        acdPaaStatusTwoWayDvAlert,
        acdPaaStatusTwoWayAvgDvAlert,
        acdPaaStatusState,
        acdPaaStatusPeerAddress
    }
    STATUS      current
    DESCRIPTION
       "Objects for the PAA status Group."
    ::= { acdPaaGroups 2 }

acdPaaUdpCfgGroup OBJECT-GROUP
    OBJECTS {
        acdPaaUdpCfgName,
        acdPaaUdpCfgState,
        acdPaaUdpCfgPktSize,
        acdPaaUdpCfgSamplingPeriod,
        acdPaaUdpCfgCcLossThresh,
        acdPaaUdpCfgPktLossRefPeriod,
        acdPaaUdpCfgPktLossThresh,
        acdPaaUdpCfgOneWayRefPeriod,
        acdPaaUdpCfgOneWayDvMax,
        acdPaaUdpCfgOneWayDvThresh,
        acdPaaUdpCfgOneWayAvgDvThresh,
        acdPaaUdpCfgTwoWayRefPeriod,
        acdPaaUdpCfgTwoWayDelayMax,
        acdPaaUdpCfgTwoWayDelayThresh,
        acdPaaUdpCfgTwoWayAvgDelayThresh,
        acdPaaUdpCfgTwoWayDvMax,
        acdPaaUdpCfgTwoWayDvThresh,
        acdPaaUdpCfgTwoWayAvgDvThresh,
        acdPaaUdpCfgIPv4DstAddr,
        acdPaaUdpCfgPortNumber,
        acdPaaUdpCfgDscpValue,
        acdPaaUdpCfgVlan1PbitsValue,
        acdPaaUdpCfgVlan2PbitsValue,
        acdPaaUdpCfgOneWayDelayMax,
        acdPaaUdpCfgOneWayDelayThresh,
        acdPaaUdpCfgOneWayAvgDelayThresh,
        acdPaaUdpCfgDestinationPortNumber,
        acdPaaUdpCfgPeerID,
        acdPaaUdpCfgOperationMode,
        acdPaaUdpCfgIgmpOneWayJoinPeriod,
        acdPaaUdpCfgIgmpRefPeriod,
        acdPaaUdpCfgIgmpMaxJoinDly,
        acdPaaUdpCfgIgmpJoinDlyThres,
        acdPaaUdpCfgIgmpJoinAvgDlyThres,
        acdPaaUdpCfgIgmpMaxLvDly,
        acdPaaUdpCfgIgmpLvDlyThresh,
        acdPaaUdpCfgIgmpLvAvgDlyThresh,
        acdPaaUdpCfgPktLossThreshExt
    }
    STATUS      current
    DESCRIPTION
       "Objects for the PAA UDP configuration Group."
    ::= { acdPaaGroups 3 }

acdPaaL2CfgGroup OBJECT-GROUP
    OBJECTS {
        acdPaaL2CfgName,
        acdPaaL2CfgState,
        acdPaaL2CfgPktSize,
        acdPaaL2CfgSamplingPeriod,
        acdPaaL2CfgCcLossThresh,
        acdPaaL2CfgPktLossRefPeriod,
        acdPaaL2CfgPktLossThresh,
        acdPaaL2CfgOneWayRefPeriod,
        acdPaaL2CfgOneWayDvMax,
        acdPaaL2CfgOneWayDvThresh,
        acdPaaL2CfgOneWayAvgDvThresh,
        acdPaaL2CfgTwoWayRefPeriod,
        acdPaaL2CfgTwoWayDelayMax,
        acdPaaL2CfgTwoWayDelayThresh,
        acdPaaL2CfgTwoWayAvgDelayThresh,
        acdPaaL2CfgTwoWayDvMax,
        acdPaaL2CfgTwoWayDvThresh,
        acdPaaL2CfgTwoWayAvgDvThresh,
        acdPaaL2CfgPortName,
        acdPaaL2CfgMacDst,
        acdPaaL2CfgEtype,
        acdPaaL2CfgVlan1IdEn,
        acdPaaL2CfgVlan1Id,
        acdPaaL2CfgVlan2IdEn,
        acdPaaL2CfgVlan2Id,
        acdPaaL2CfgVlan1PbitsValue,
        acdPaaL2CfgVlan2PbitsValue,
        acdPaaL2CfgOneWayDelayMax,
        acdPaaL2CfgOneWayDelayThresh,
        acdPaaL2CfgOneWayAvgDelayThresh,
        acdPaaL2CfgPeerID,
        acdPaaL2CfgOperationMode,
        acdPaaL2CfgPktLossThreshExt
    }
    STATUS      current
    DESCRIPTION
       "Objects for the PAA L2 configuration Group."
    ::= { acdPaaGroups 4 }

acdPaaHistResultGroup OBJECT-GROUP
    OBJECTS {
        acdPaaHistResultStatus,
        acdPaaHistResultDuration,
        acdPaaHistResultIntervalEnd,
        acdPaaHistResultPktLossNeValid,
        acdPaaHistResultPktLossNeSamples,
        acdPaaHistResultPktLossNeValue,
        acdPaaHistResultPktLossFeValid,
        acdPaaHistResultPktLossFeSamples,
        acdPaaHistResultPktLossFeValue,
        acdPaaHistResultOneWayDelayValid,
        acdPaaHistResultOneWayDelaySamples,
        acdPaaHistResultOneWayDelayMinValue,
        acdPaaHistResultOneWayDelayMaxValue,
        acdPaaHistResultOneWayDelayAvgValue,
        acdPaaHistResultOneWayDelayThreshEx,
        acdPaaHistResultOneWayDvValid,
        acdPaaHistResultOneWayDvSamples,
        acdPaaHistResultOneWayDvMinValue,
        acdPaaHistResultOneWayDvMaxValue,
        acdPaaHistResultOneWayDvAvgValue,
        acdPaaHistResultOneWayDvThreshEx,
        acdPaaHistResultTwoWayDelayValid,
        acdPaaHistResultTwoWayDelaySamples,
        acdPaaHistResultTwoWayDelayMinValue,
        acdPaaHistResultTwoWayDelayMaxValue,
        acdPaaHistResultTwoWayDelayAvgValue,
        acdPaaHistResultTwoWayDelayThreshEx,
        acdPaaHistResultTwoWayDvValid,
        acdPaaHistResultTwoWayDvSamples,
        acdPaaHistResultTwoWayDvMinValue,
        acdPaaHistResultTwoWayDvMaxValue,
        acdPaaHistResultTwoWayDvAvgValue,
        acdPaaHistResultTwoWayDvThreshEx,
        acdPaaHistResultIgmpJoinDelayValid,
        acdPaaHistResultIgmpJoinDelaySamples,
        acdPaaHistResultIgmpJoinDelayMinValue,
        acdPaaHistResultIgmpJoinDelayMaxValue,
        acdPaaHistResultIgmpJoinDelayAvgValue,
        acdPaaHistResultIgmpJoinDelayThreshEx,
        acdPaaHistResultIgmpLeaveDelayValid,
        acdPaaHistResultIgmpLeaveDelaySamples,
        acdPaaHistResultIgmpLeaveDelayMinValue,
        acdPaaHistResultIgmpLeaveDelayMaxValue,
        acdPaaHistResultIgmpLeaveDelayAvgValue,
        acdPaaHistResultIgmpLeaveDelayThreshEx,
        acdPaaHistResultPktLossNeValueExt,
        acdPaaHistResultPktLossFeValueExt,
        acdPaaHistResultPktLossNeNbrLoss,
        acdPaaHistResultPktLossFeNbrLoss
    }
    STATUS      current
    DESCRIPTION
       "Objects for the PAA history result Group."
    ::= { acdPaaGroups 5 }

acdPaaCompliance MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
       "The compliance statement for support of the ACD-PAA-MIB module."
    MODULE
        MANDATORY-GROUPS {
            acdPaaResultGroup,
            acdPaaStatusGroup,
            acdPaaUdpCfgGroup,
            acdPaaL2CfgGroup,
            acdPaaHistResultGroup
         }

    ::= { acdPaaCompliances 1 }


END