ADVA-FSPR7-DEF-MIB

--  ***************************************************************************
--  ADVA-FSPR7-DEF-MIB.txt
--
--               ADVA AG Optical Networking Default MIB File
--
--  Copyright 2011 ADVA AG Optical Networking.
--
--  All rights reserved.
--  ***************************************************************************


--  MIB default definitions required for entity management.

ADVA-FSPR7-DEF-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-COMPLIANCE,
    OBJECT-GROUP
                                        FROM  SNMPv2-CONF
    OBJECT-TYPE,
    MODULE-IDENTITY,
    Unsigned32,
    Integer32,
    IpAddress
                                        FROM  SNMPv2-SMI
    RowStatus
                                        FROM  SNMPv2-TC
    SnmpAdminString
                                        FROM  SNMP-FRAMEWORK-MIB
    fspR7,
    ApsHoldoffTime,
    ApsDirection,
    EnableState,
    EthDuplexMode,
    FspR7EquipmentType,
    LoopConfig,
    OhTerminationLevel,
    OtnPayloadType,
    OtnTcmLevel,
    ProtectionMech,
    SonetTimingSource,
    SonetTraceForm,
    TimMode,
    VirtualContainerType
                                        FROM  ADVA-MIB
    ApsRevertMode,
    ApsType,
    FfpType,
    FspR7APSCommand,
    FspR7AdminState,
    FspR7AlsMode,
    FspR7AseTabOpr,
    FspR7AutoThresReset,
    FspR7BERThreshold,
    FspR7BERThresholdSection,
    FspR7BidirectionalChannel,
    FspR7Baund,
    FspR7Bitrate,
    FspR7CapInventory,
    FspR7ChannelBandwidth,
    FspR7ChannelIdentifier,
    FspR7ChannelSpacing,
    FspR7CodeGain,
    FspR7Conn,
    FspR7ConnectorType,
    FspR7CpAuthType,
    FspR7DCFiberType,
    FspR7DeploymentScenario,
    FspR7DisableEnable,
    FspR7DispersionCompensation,
    FspR7DispersionConfig,
    FspR7DispersionModes,
    FspR7EdfaOutputPowerRating,
    FspR7EnableDisable,
    FspR7EqlzAdminState,
    FspR7ErrorFwdMode,
    FspR7FecType,
    FspR7FiberBrand,
    FspR7FiberDetect,
    FspR7FlowControlMode,
    FspR7ForceConfig,
    FspR7FrameFormat,
    FspR7FunctionCrs,
    FspR7Gain,
    FspR7GainRange,
    FspR7InitEqualization,
    FspR7InterfaceType,
    FspR7InvertTelemetryInputLogic,
    FspR7IpType,
    FspR7IPv6Type,
    FspR7IpMode,
    FspR7LacpMode,
    FspR7LacpTimeout,
    FspR7LagPortType,
    FspR7LaneGroupInventory,
    FspR7LaserDelayTimer,
    FspR7LaserForcedOperation,
    FspR7LineCoding,
    FspR7LossAttenuation,
    FspR7ManualAuto,
    FspR7Mapping,
    FspR7MaxBitErrorRate,
    FspR7MuxMethod,
    FspR7NdpCleanup,
    FspR7NoYes,
    FspR7NumberOfChannels,
    FspR7NumberOfChannelsProv,
    FspR7OpticalBand,
    FspR7OpticalFiberType,
    FspR7OpticalGroup,
    FspR7OpticalInterfaceReach,
    FspR7OpticalSubBand,
    FspR7OptUpdate,
    FspR7OpuPayloadType,
    FspR7OscUsage,
    FspR7OspfMode,
    FspR7OtdrPeriod,
    FspR7PathNode,
    FspR7PlugDataRate,
    FspR7PmReset,
    FspR7PortBehaviour,
    FspR7PortMode,
    FspR7PortRole,
    FspR7PrbsPmReset,
    FspR7ProtectionType,
    FspR7PsuOutputPower,
    FspR7RedLinedState,
    FspR7RlsMan,
    FspR7RoadmNumber,
    FspR7RowStatus,
    FspR7Scrambling,
    FspR7SingleFiberLocation,
    FspR7SnmpHexString,
    FspR7SnmpLongString,
    FspR7Stuff,
    FspR7SupplyType,
    FspR7TelemetryOutput,
    FspR7PRBSTest,
    FspR7TifOutputReset,
    FspR7TiltSet,
    FspR7Topology,
    FspR7TrafficDirection,
    FspR7TransmissionMode,
    FspR7TurnupConfig,
    FspR7TxOffOnTm,
    FspR7TypeConnection,
    FspR7TypeCrs,
    FspR7Unsigned32Caps,
    FspR7UntaggedFrames,
    FspR7VoaMode,
    FspR7XfpDecisionThres,
    FspR7YesNo
                                        FROM  ADVA-FSPR7-TC-MIB
    entityConnectionClassName,
    entityContainerShelfNo,
    entityContainerSlotNo,
    entityContainerPortNo,
    entityContainerExtNo,
    entityContainerClassName,
    entityCrossConnFromShelfNo,
    entityCrossConnFromSlotNo,
    entityCrossConnFromPortNo,
    entityCrossConnFromExtNo,
    entityCrossConnFromClassName,
    entityCrossConnToShelfNo,
    entityCrossConnToSlotNo,
    entityCrossConnToPortNo,
    entityCrossConnToExtNo,
    entityCrossConnToClassName,
    entityCrossConnClassName,
    entityCrsOptLineFromIndexNo1,
    entityCrsOptLineFromIndexNo2,
    entityCrsOptLineFromIndexNo3,
    entityCrsOptLineFromIndexNo4,
    entityCrsOptLineFromClassName,
    entityCrsOptLineToIndexNo1,
    entityCrsOptLineToIndexNo2,
    entityCrsOptLineToIndexNo3,
    entityCrsOptLineToIndexNo4,
    entityCrsOptLineToClassName,
    entityCrsOptLineClassName,
    entityDcnShelfNo,
    entityDcnSlotNo,
    entityDcnPortNo,
    entityDcnExtNo,
    entityDcnClassName,
    entityEqptShelfNo,
    entityEqptSlotNo,
    entityEqptPortNo,
    entityEqptExtNo,
    entityEqptClassName,
    entityExternalPortShelfNo,
    entityExternalPortSlotNo,
    entityExternalPortPortNo,
    entityExternalPortExtNo,
    entityExternalPortClassName,
    entityFacilityShelfNo,
    entityFacilitySlotNo,
    entityFacilityPortNo,
    entityFacilityExtNo,
    entityFacilityClassName,
    entityOpticalMuxShelfNo,
    entityOpticalMuxSlotNo,
    entityOpticalMuxPortNo,
    entityOpticalMuxExtNo,
    entityOpticalMuxClassName,
    entityOptLineIndexNo1,
    entityOptLineClassName,
    entityShelfConnShelfNo,
    entityShelfConnSlotNo,
    entityShelfConnPortNo,
    entityShelfConnExtNo,
    entityShelfConnClassName,
    entityTerminPointIndexNo1,
    entityTerminPointIndexNo2,
    entityTerminPointIndexNo3,
    entityTerminPointIndexNo4,
    entityTerminPointClassName,
    entityFfpShelfNo,
    entityFfpSlotNo,
    entityFfpPortNo,
    entityFfpExtNo,
    entityFfpClassName,
    entityCrossDcnShelfNo,
    entityCrossDcnSlotNo,
    entityCrossDcnPortNo,
    entityCrossDcnExtNo,
    entityCrossDcnClassName
                                        FROM  ADVA-FSPR7-MIB;
    

advaFspR7Def MODULE-IDENTITY

    LAST-UPDATED "201410150000Z"

    ORGANIZATION "ADVA Optical Networking"

    CONTACT-INFO "EMEA Support
                  Phone : +49 89 89 0665 848
                  Fax   : +49 89 89 0665 22848
                  Email : support@advaoptical.com

                  North American Support
                  Phone : 886 442 ADVA (2382) (toll-free within the US, Canada and Mexico)
                  Fax   : + 1 806 741 8529 (elsewhere)
                  Email : support-usa@advaoptical.com

                  Asia Pacific Support
                  Phone : + 1 866 442 2382 (other toll-free numbers available in some countries)
                  Email : support-asia@advaoptical.com"

    DESCRIPTION   "This is a MIB definition for ADVA AG Optical Networking entity management."

    REVISION      "201410150000Z"
    DESCRIPTION   "FSP3000 F7 Release 13.2.2 MIB."

    REVISION      "201409290000Z"
    DESCRIPTION   "FSP3000 F7 Release 13.2.1 MIB."

    REVISION      "201312040000Z"
    DESCRIPTION   "FSP3000 F7 Release 12.2.1 MIB."

    REVISION      "201308200000Z"
    DESCRIPTION   "FSP3000 F7 Release 12.1.1 MIB."

    REVISION      "201105220000Z"
    DESCRIPTION   "FSP3000 F7 Release 11.2 MIB."
    ::= { fspR7 10 }


managementDef
    OBJECT IDENTIFIER ::= { advaFspR7Def 3 }

specificMgmtDef
    OBJECT IDENTIFIER ::= { managementDef 2 }

eqptMgmtDef
    OBJECT IDENTIFIER ::= { managementDef 3 }

facilityMgmtDef
    OBJECT IDENTIFIER ::= { managementDef 4 }

dcnMgmtDef
    OBJECT IDENTIFIER ::= { managementDef 5 }

opticalMuxMgmtDef
    OBJECT IDENTIFIER ::= { managementDef 6 }

shelfConnMgmtDef
    OBJECT IDENTIFIER ::= { managementDef 7 }

envMgmtDef
    OBJECT IDENTIFIER ::= { managementDef 8 }

containerMgmtDef
    OBJECT IDENTIFIER ::= { managementDef 9 }

opticalLineMgmtDef
    OBJECT IDENTIFIER ::= { managementDef 10 }

performanceDef
    OBJECT IDENTIFIER ::= { advaFspR7Def 6 }

performanceFacilityDef
    OBJECT IDENTIFIER ::= { performanceDef 4 }

performanceFacilityThresholdDef
    OBJECT IDENTIFIER ::= { performanceFacilityDef 1 }

featureSpecificDef
    OBJECT IDENTIFIER ::= { advaFspR7Def 7 }

fiberMapDef
    OBJECT IDENTIFIER ::= { featureSpecificDef 1 }

eciDef
    OBJECT IDENTIFIER ::= { featureSpecificDef 3 }

changeServiceDef
    OBJECT IDENTIFIER ::= { featureSpecificDef 5 }

protectionDef
    OBJECT IDENTIFIER ::= { featureSpecificDef 6 }

crossConnectionDefTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CrossConnectionDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "crossConnectionDefTable"
    ::=  { specificMgmtDef 6 }

crossConnectionDefEntry OBJECT-TYPE
    SYNTAX      CrossConnectionDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "Entry of crossConnectionDefTable"
    INDEX       {
                  entityCrossConnFromShelfNo,
                  entityCrossConnFromSlotNo,
                  entityCrossConnFromPortNo,
                  entityCrossConnFromExtNo,
                  entityCrossConnFromClassName,
                  entityCrossConnToShelfNo,
                  entityCrossConnToSlotNo,
                  entityCrossConnToPortNo,
                  entityCrossConnToExtNo,
                  entityCrossConnToClassName,
                  entityCrossConnClassName
                }
    ::=  { crossConnectionDefTable 1 }

CrossConnectionDefEntry ::=  SEQUENCE
  { crossConnectionDefRowStatus FspR7RowStatus,
    crossConnectionDefAdmin FspR7AdminState,
    crossConnectionDefRedLineState FspR7RedLinedState,
    crossConnectionDefConn FspR7Conn,
    crossConnectionDefAlias SnmpAdminString,
    crossConnectionDefPathNode FspR7PathNode,
    crossConnectionDefTunnelAid SnmpAdminString,
    crossConnectionDefType FspR7InterfaceType,
    crossConnectionDefCrsFunction FspR7FunctionCrs }

crossConnectionDefRowStatus OBJECT-TYPE
    SYNTAX      FspR7RowStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Cross Connection Default RowStatus."
    ::=  { crossConnectionDefEntry 1 }

crossConnectionDefAdmin OBJECT-TYPE
    SYNTAX      FspR7AdminState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Cross Connection Default Adminstrative State."
    ::=  { crossConnectionDefEntry 2 }

crossConnectionDefRedLineState OBJECT-TYPE
    SYNTAX      FspR7RedLinedState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Cross Connection Default Red Lined State."
    ::=  { crossConnectionDefEntry 3 }

crossConnectionDefConn OBJECT-TYPE
    SYNTAX      FspR7Conn
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Cross Connection Default Direction."
    ::=  { crossConnectionDefEntry 4 }

crossConnectionDefAlias OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Cross Connection Default Alias."
    ::=  { crossConnectionDefEntry 5 }

crossConnectionDefPathNode OBJECT-TYPE
    SYNTAX      FspR7PathNode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Cross Connection Default Path Node."
    ::=  { crossConnectionDefEntry 6 }

crossConnectionDefTunnelAid OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Cross Connection Default Tunnel AID."
    ::=  { crossConnectionDefEntry 7 }

crossConnectionDefType OBJECT-TYPE
    SYNTAX      FspR7InterfaceType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Cross Connection Default Type Facility."
    ::=  { crossConnectionDefEntry 8 }

crossConnectionDefCrsFunction OBJECT-TYPE
    SYNTAX      FspR7FunctionCrs
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Describes the Cross Connect Functionality" 
    ::=  { crossConnectionDefEntry 9 }

crossOpticalLineDefTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CrossOpticalLineDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "crossOpticalLineDefTable"
    ::=  { specificMgmtDef 7 }

crossOpticalLineDefEntry OBJECT-TYPE
    SYNTAX      CrossOpticalLineDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "Entry of crossOpticalLineDefTable"
    INDEX       {
                  entityCrsOptLineFromIndexNo1,
                  entityCrsOptLineFromIndexNo2,
                  entityCrsOptLineFromIndexNo3,
                  entityCrsOptLineFromIndexNo4,
                  entityCrsOptLineFromClassName,
                  entityCrsOptLineToIndexNo1,
                  entityCrsOptLineToIndexNo2,
                  entityCrsOptLineToIndexNo3,
                  entityCrsOptLineToIndexNo4,
                  entityCrsOptLineToClassName,
                  entityCrsOptLineClassName
                }
    ::=  { crossOpticalLineDefTable 1 }

CrossOpticalLineDefEntry ::=  SEQUENCE
  { crossOpticalLineDefRowStatus FspR7RowStatus,
    crossOpticalLineDefRedLineState FspR7RedLinedState,
    crossOpticalLineDefConn FspR7Conn,
    crossOpticalLineDefCrsType FspR7TypeCrs,
    crossOpticalLineDefAlias SnmpAdminString,
    crossOpticalLineDefTunnelAid SnmpAdminString }

crossOpticalLineDefRowStatus OBJECT-TYPE
    SYNTAX      FspR7RowStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Cross Connection Default RowStatus."
    ::=  { crossOpticalLineDefEntry 1 }

crossOpticalLineDefRedLineState OBJECT-TYPE
    SYNTAX      FspR7RedLinedState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Cross Optical Line Default Red Lined State."
    ::=  { crossOpticalLineDefEntry 2 }

crossOpticalLineDefConn OBJECT-TYPE
    SYNTAX      FspR7Conn
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Cross Optical Line Default Direction."
    ::=  { crossOpticalLineDefEntry 3 }

crossOpticalLineDefCrsType OBJECT-TYPE
    SYNTAX      FspR7TypeCrs
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Cross Optical Line Default Type."
    ::=  { crossOpticalLineDefEntry 4 }

crossOpticalLineDefAlias OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Cross Optical Line Default Alias."
    ::=  { crossOpticalLineDefEntry 5 }

crossOpticalLineDefTunnelAid OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Cross Optical Line Default Tunnel AID."
    ::=  { crossOpticalLineDefEntry 6 }

endOfCrossOpticalLineDefTable OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { specificMgmtDef 8 }

crossDcnDefTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CrossDcnDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "crossDcnDefTable"
    ::=  { specificMgmtDef 9 }

crossDcnDefEntry OBJECT-TYPE
    SYNTAX      CrossDcnDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "Entry of crossDcnDefTable"
    INDEX       {
                  entityCrossDcnShelfNo,
                  entityCrossDcnSlotNo,
                  entityCrossDcnPortNo,
                  entityCrossDcnExtNo,
                  entityCrossDcnClassName
                }
    ::=  { crossDcnDefTable 1 }

CrossDcnDefEntry ::=  SEQUENCE
  { crossDcnDefRowStatus RowStatus,
    crossDcnDefType FspR7TypeConnection,
    crossDcnDefLink SnmpAdminString,
    crossDcnDefEcc SnmpAdminString }

crossDcnDefRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "RowStatus object is used to create or delete a row in the table."
    ::=  { crossDcnDefEntry 1 }

crossDcnDefType OBJECT-TYPE
    SYNTAX      FspR7TypeConnection
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Type of Cross-Connect" 
    ::=  { crossDcnDefEntry 2 }

crossDcnDefLink OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Address Identifier of PPPIP LINK Entity." 
    ::=  { crossDcnDefEntry 3 }

crossDcnDefEcc OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Address Identifier of ECC Entity." 
    ::=  { crossDcnDefEntry 4 }

endOfCrossDcnDefTable OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { specificMgmtDef 10 }

endOfSpecificMgmtDef OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { specificMgmtDef 10000 }

shelfDefTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ShelfDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "shelfCapTable"
    ::=  { eqptMgmtDef 1 }

shelfDefEntry OBJECT-TYPE
    SYNTAX      ShelfDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "Entry of shelfCapTable"
    INDEX       {
                  entityEqptShelfNo,
                  entityEqptSlotNo,
                  entityEqptPortNo,
                  entityEqptExtNo,
                  entityEqptClassName
                }
    ::=  { shelfDefTable 1 }

ShelfDefEntry ::=  SEQUENCE
  { shelfDefRowStatus RowStatus,
    shelfDefPsuOutputPower FspR7PsuOutputPower,
    shelfDefType FspR7EquipmentType,
    shelfDefRack SnmpAdminString,
    shelfDefSupply FspR7SupplyType,
    shelfDefBandProvision FspR7OpticalBand,
    shelfDefAdmin FspR7AdminState,
    shelfDefRackNumber Unsigned32,
    shelfDefRackOrder Unsigned32,
    shelfDefAlias SnmpAdminString,
    shelfDefSlot Unsigned32 }

shelfDefRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "RowStatus object is used to create or delete a row in the table."
    ::=  { shelfDefEntry 1 }

shelfDefPsuOutputPower OBJECT-TYPE
    SYNTAX      FspR7PsuOutputPower
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Maximum PSU Output Power" 
    ::=  { shelfDefEntry 2 }

shelfDefType OBJECT-TYPE
    SYNTAX      FspR7EquipmentType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The TYPE of Equipment and the MODE setting determine uniquely the number and allowed TYPE's of the provisionable dependent entities (plugs, interfaces, modules)" 
    ::=  { shelfDefEntry 3 }

shelfDefRack OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Rack Containing Shelf" 
    ::=  { shelfDefEntry 4 }

shelfDefSupply OBJECT-TYPE
    SYNTAX      FspR7SupplyType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The kind of power supply - provisioned value" 
    ::=  { shelfDefEntry 5 }

shelfDefBandProvision OBJECT-TYPE
    SYNTAX      FspR7OpticalBand
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Band Provision. Reference to BAND__INVENTORY." 
    ::=  { shelfDefEntry 6 }

shelfDefAdmin OBJECT-TYPE
    SYNTAX      FspR7AdminState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Administrative State will be displayed in the GUI with full
         name values; it will be differently displayed in TL1 syntax according
         to TL1 display rules. The transaction into the UAS state requires
         a special destroy/delete function" 
    ::=  { shelfDefEntry 7 }

shelfDefRackNumber OBJECT-TYPE
    SYNTAX      Unsigned32 (0..16)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of the Rack" 
    ::=  { shelfDefEntry 8 }

shelfDefRackOrder OBJECT-TYPE
    SYNTAX      Unsigned32 (0..45)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number place where the Shelf is placed in the rack (buttom up counting)" 
    ::=  { shelfDefEntry 9 }

shelfDefAlias OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "User Applied Descriptor" 
    ::=  { shelfDefEntry 10 }

shelfDefSlot OBJECT-TYPE
    SYNTAX      Unsigned32 (0..20)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Slot Position" 
    ::=  { shelfDefEntry 11 }

endOfShelfDefTable OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { eqptMgmtDef 2 }

fanDefTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF FanDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "fanCapTable"
    ::=  { eqptMgmtDef 3 }

fanDefEntry OBJECT-TYPE
    SYNTAX      FanDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "Entry of fanCapTable"
    INDEX       {
                  entityEqptShelfNo,
                  entityEqptSlotNo,
                  entityEqptPortNo,
                  entityEqptExtNo,
                  entityEqptClassName
                }
    ::=  { fanDefTable 1 }

FanDefEntry ::=  SEQUENCE
  { fanDefRowStatus RowStatus,
    fanDefAdmin FspR7AdminState,
    fanDefType FspR7EquipmentType,
    fanDefAlias SnmpAdminString,
    fanDefOutputReset FspR7TifOutputReset }

fanDefRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "RowStatus object is used to create or delete a row in the table."
    ::=  { fanDefEntry 1 }

fanDefAdmin OBJECT-TYPE
    SYNTAX      FspR7AdminState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Administrative State will be displayed in the GUI with full
         name values; it will be differently displayed in TL1 syntax according
         to TL1 display rules. The transaction into the UAS state requires
         a special destroy/delete function" 
    ::=  { fanDefEntry 2 }

fanDefType OBJECT-TYPE
    SYNTAX      FspR7EquipmentType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The TYPE of Equipment and the MODE setting determine uniquely the number and allowed TYPE's of the provisionable dependent entities (plugs, interfaces, modules)" 
    ::=  { fanDefEntry 3 }

fanDefAlias OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "User Applied Descriptor" 
    ::=  { fanDefEntry 4 }

fanDefOutputReset OBJECT-TYPE
    SYNTAX      FspR7TifOutputReset
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Has the same function as the HW switch at the UTM board" 
    ::=  { fanDefEntry 5 }

endOfFanDefTable OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { eqptMgmtDef 4 }

plugDefTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PlugDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "plugCapTable"
    ::=  { eqptMgmtDef 5 }

plugDefEntry OBJECT-TYPE
    SYNTAX      PlugDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "Entry of plugCapTable"
    INDEX       {
                  entityEqptShelfNo,
                  entityEqptSlotNo,
                  entityEqptPortNo,
                  entityEqptExtNo,
                  entityEqptClassName
                }
    ::=  { plugDefTable 1 }

PlugDefEntry ::=  SEQUENCE
  { plugDefRowStatus RowStatus,
    plugDefConnector FspR7ConnectorType,
    plugDefType FspR7EquipmentType,
    plugDefReach FspR7OpticalInterfaceReach,
    plugDefLoopbackAttenuation Unsigned32,
    plugDefTransmitChannel FspR7ChannelIdentifier,
    plugDefAlias SnmpAdminString,
    plugDefLaneGroup FspR7LaneGroupInventory,
    plugDefMaxDataRate FspR7PlugDataRate,
    plugDefThirdPartyUsage EnableState,
    plugDefAdmin FspR7AdminState,
    plugDefBidirectionalChannel FspR7BidirectionalChannel,
    plugDefChannelSpacingProvision FspR7ChannelSpacing }

plugDefRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "RowStatus object is used to create or delete a row in the table."
    ::=  { plugDefEntry 1 }

plugDefConnector OBJECT-TYPE
    SYNTAX      FspR7ConnectorType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Connector" 
    ::=  { plugDefEntry 2 }

plugDefType OBJECT-TYPE
    SYNTAX      FspR7EquipmentType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The TYPE of Equipment and the MODE setting determine uniquely the number and allowed TYPE's of the provisionable dependent entities (plugs, interfaces, modules)" 
    ::=  { plugDefEntry 3 }

plugDefReach OBJECT-TYPE
    SYNTAX      FspR7OpticalInterfaceReach
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Reach" 
    ::=  { plugDefEntry 4 }

plugDefLoopbackAttenuation OBJECT-TYPE
    SYNTAX      Unsigned32 (10..300) 
    UNITS       "0.1 dB"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Loop back attenuation used for Optojack SE plugs" 
    ::=  { plugDefEntry 5 }

plugDefTransmitChannel OBJECT-TYPE
    SYNTAX      FspR7ChannelIdentifier
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Channel" 
    ::=  { plugDefEntry 6 }

plugDefAlias OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "User Applied Descriptor" 
    ::=  { plugDefEntry 7 }

plugDefLaneGroup OBJECT-TYPE
    SYNTAX      FspR7LaneGroupInventory
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lane group to provision" 
    ::=  { plugDefEntry 8 }

plugDefMaxDataRate OBJECT-TYPE
    SYNTAX      FspR7PlugDataRate
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Rate" 
    ::=  { plugDefEntry 9 }

plugDefThirdPartyUsage OBJECT-TYPE
    SYNTAX      EnableState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Usage of 3rd Party Plugs" 
    ::=  { plugDefEntry 10 }

plugDefAdmin OBJECT-TYPE
    SYNTAX      FspR7AdminState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Administrative State will be displayed in the GUI with full
         name values; it will be differently displayed in TL1 syntax according
         to TL1 display rules. The transaction into the UAS state requires
         a special destroy/delete function" 
    ::=  { plugDefEntry 11 }

plugDefBidirectionalChannel OBJECT-TYPE
    SYNTAX      FspR7BidirectionalChannel
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Bidirectional Channel Rates from Provisioning" 
    ::=  { plugDefEntry 12 }

plugDefChannelSpacingProvision OBJECT-TYPE
    SYNTAX      FspR7ChannelSpacing
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Channel Space Provision, reference to CHA-SPC__INVENTORY" 
    ::=  { plugDefEntry 13 }

endOfPlugDefTable OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { eqptMgmtDef 6 }

moduleDefTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ModuleDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "moduleCapTable"
    ::=  { eqptMgmtDef 7 }

moduleDefEntry OBJECT-TYPE
    SYNTAX      ModuleDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "Entry of moduleCapTable"
    INDEX       {
                  entityEqptShelfNo,
                  entityEqptSlotNo,
                  entityEqptPortNo,
                  entityEqptExtNo,
                  entityEqptClassName
                }
    ::=  { moduleDefTable 1 }

ModuleDefEntry ::=  SEQUENCE
  { moduleDefRowStatus RowStatus,
    moduleDefPsuOutputPower FspR7PsuOutputPower,
    moduleDefPower FspR7EdfaOutputPowerRating,
    moduleDefReach FspR7OpticalInterfaceReach,
    moduleDefInitEqlz FspR7InitEqualization,
    moduleDefLanAid SnmpAdminString,
    moduleDefType FspR7EquipmentType,
    moduleDefMapping FspR7Mapping,
    moduleDefGainRange FspR7GainRange,
    moduleDefSfProvision FspR7SingleFiberLocation,
    moduleDefCapabilityLevelProvision FspR7CapInventory,
    moduleDefDCFiberType FspR7DCFiberType,
    moduleDefChannelsProvision FspR7NumberOfChannelsProv,
    moduleDefFiberDetect FspR7FiberDetect,
    moduleDefSupply FspR7SupplyType,
    moduleDefGroup FspR7OpticalGroup,
    moduleDefDeploy FspR7DeploymentScenario,
    moduleDefLagSysPrio Unsigned32,
    moduleDefTransmitChannel FspR7ChannelIdentifier,
    moduleDefBand FspR7OpticalBand,
    moduleDefTrafficDirection FspR7TrafficDirection,
    moduleDefIpAddr IpAddress,
    moduleDefDispersionCompensation FspR7DispersionCompensation,
    moduleDefActivateDetect FspR7YesNo,
    moduleDefOscUsage FspR7OscUsage,
    moduleDefAdmin FspR7AdminState,
    moduleDefScrambling FspR7Scrambling,
    moduleDefChannelsNumber FspR7NumberOfChannels,
    moduleDefChannelSpacingProvision FspR7ChannelSpacing,
    moduleDefMode FspR7TransmissionMode,
    moduleDefSubBandProvision FspR7OpticalSubBand,
    moduleDefAlias SnmpAdminString,
    moduleDefFiberType FspR7OpticalFiberType,
    moduleDefChannelSpacing FspR7ChannelSpacing,
    moduleDefOutputReset FspR7TifOutputReset,
    moduleDefRoadmNumber FspR7RoadmNumber,
    moduleDefTopology FspR7Topology,
    moduleDefForceConfig FspR7ForceConfig,
    moduleDefMuxMethod FspR7MuxMethod,
    moduleDefNdpCleanup FspR7NdpCleanup,
    moduleDefRstp FspR7EnableDisable,
    moduleDefRemoteReset FspR7RlsMan }

moduleDefRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "RowStatus object is used to create or delete a row in the table."
    ::=  { moduleDefEntry 1 }

moduleDefPsuOutputPower OBJECT-TYPE
    SYNTAX      FspR7PsuOutputPower
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Maximum PSU Output Power" 
    ::=  { moduleDefEntry 2 }

moduleDefPower OBJECT-TYPE
    SYNTAX      FspR7EdfaOutputPowerRating
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Optical Output Power Rating - Provision" 
    ::=  { moduleDefEntry 3 }

moduleDefReach OBJECT-TYPE
    SYNTAX      FspR7OpticalInterfaceReach
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Reach" 
    ::=  { moduleDefEntry 4 }

moduleDefInitEqlz OBJECT-TYPE
    SYNTAX      FspR7InitEqualization
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Initiate Equalization" 
    ::=  { moduleDefEntry 5 }

moduleDefLanAid OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "AID of LAN" 
    ::=  { moduleDefEntry 6 }

moduleDefType OBJECT-TYPE
    SYNTAX      FspR7EquipmentType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The TYPE of Equipment and the MODE setting determine uniquely the number and allowed TYPE's of the provisionable dependent entities (plugs, interfaces, modules)" 
    ::=  { moduleDefEntry 7 }

moduleDefMapping OBJECT-TYPE
    SYNTAX      FspR7Mapping
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Type of mapping; transparent or framing" 
    ::=  { moduleDefEntry 8 }

moduleDefGainRange OBJECT-TYPE
    SYNTAX      FspR7GainRange
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "EDFA gain range to provision" 
    ::=  { moduleDefEntry 9 }

moduleDefSfProvision OBJECT-TYPE
    SYNTAX      FspR7SingleFiberLocation
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "determines the location (A or B) for Single Fiber applications" 
    ::=  { moduleDefEntry 10 }

moduleDefCapabilityLevelProvision OBJECT-TYPE
    SYNTAX      FspR7CapInventory
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Capability level provisioned" 
    ::=  { moduleDefEntry 11 }

moduleDefDCFiberType OBJECT-TYPE
    SYNTAX      FspR7DCFiberType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Dispersion Compensation Fibertype" 
    ::=  { moduleDefEntry 12 }

moduleDefChannelsProvision OBJECT-TYPE
    SYNTAX      FspR7NumberOfChannelsProv
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of channels supported by an entity" 
    ::=  { moduleDefEntry 13 }

moduleDefFiberDetect OBJECT-TYPE
    SYNTAX      FspR7FiberDetect
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Fiber Detect" 
    ::=  { moduleDefEntry 14 }

moduleDefSupply OBJECT-TYPE
    SYNTAX      FspR7SupplyType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The kind of power supply - provisioned value" 
    ::=  { moduleDefEntry 15 }

moduleDefGroup OBJECT-TYPE
    SYNTAX      FspR7OpticalGroup
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Group of 4 DWDM channels or the Group of 4 CWDM channels" 
    ::=  { moduleDefEntry 16 }

moduleDefDeploy OBJECT-TYPE
    SYNTAX      FspR7DeploymentScenario
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Describes how the card is applied related to a network scenario" 
    ::=  { moduleDefEntry 17 }

moduleDefLagSysPrio OBJECT-TYPE
    SYNTAX      Unsigned32 (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Link Aggregation Group Actor System Priority Part of LAG ID" 
    ::=  { moduleDefEntry 18 }

moduleDefTransmitChannel OBJECT-TYPE
    SYNTAX      FspR7ChannelIdentifier
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Channel" 
    ::=  { moduleDefEntry 19 }

moduleDefBand OBJECT-TYPE
    SYNTAX      FspR7OpticalBand
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "The optical band of the module."
    ::=  { moduleDefEntry 20 }

moduleDefTrafficDirection OBJECT-TYPE
    SYNTAX      FspR7TrafficDirection
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Traffic Direction" 
    ::=  { moduleDefEntry 21 }

moduleDefIpAddr OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "IP Address assigned to LAN IP Interface" 
    ::=  { moduleDefEntry 22 }

moduleDefDispersionCompensation OBJECT-TYPE
    SYNTAX      FspR7DispersionCompensation
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Dispersion Compensation Value in km of SSMF fiber" 
    ::=  { moduleDefEntry 23 }

moduleDefActivateDetect OBJECT-TYPE
    SYNTAX      FspR7YesNo
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Initialize Topology Detection" 
    ::=  { moduleDefEntry 24 }

moduleDefOscUsage OBJECT-TYPE
    SYNTAX      FspR7OscUsage
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Select if and how the OSC is to be used on an amplifier" 
    ::=  { moduleDefEntry 25 }

moduleDefAdmin OBJECT-TYPE
    SYNTAX      FspR7AdminState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Administrative State will be displayed in the GUI with full
         name values; it will be differently displayed in TL1 syntax according
         to TL1 display rules. The transaction into the UAS state requires
         a special destroy/delete function" 
    ::=  { moduleDefEntry 26 }

moduleDefScrambling OBJECT-TYPE
    SYNTAX      FspR7Scrambling
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Configuration of scrambling functionality for Virtual Facilities" 
    ::=  { moduleDefEntry 27 }

moduleDefChannelsNumber OBJECT-TYPE
    SYNTAX      FspR7NumberOfChannels
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of channels supported by an entity" 
    ::=  { moduleDefEntry 28 }

moduleDefChannelSpacingProvision OBJECT-TYPE
    SYNTAX      FspR7ChannelSpacing
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Channel Space Provision, reference to CHA-SPC__INVENTORY" 
    ::=  { moduleDefEntry 29 }

moduleDefMode OBJECT-TYPE
    SYNTAX      FspR7TransmissionMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Mode of the module, determine operation or functionality" 
    ::=  { moduleDefEntry 30 }

moduleDefSubBandProvision OBJECT-TYPE
    SYNTAX      FspR7OpticalSubBand
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Subband - Provision" 
    ::=  { moduleDefEntry 31 }

moduleDefAlias OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "User Applied Descriptor" 
    ::=  { moduleDefEntry 32 }

moduleDefFiberType OBJECT-TYPE
    SYNTAX      FspR7OpticalFiberType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Fiber of Optical Interface - Provision, Reference to FIBER__INVENTORY" 
    ::=  { moduleDefEntry 33 }

moduleDefChannelSpacing OBJECT-TYPE
    SYNTAX      FspR7ChannelSpacing
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "ITU Grid channel spacing" 
    ::=  { moduleDefEntry 34 }

moduleDefOutputReset OBJECT-TYPE
    SYNTAX      FspR7TifOutputReset
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Has the same function as the HW switch at the UTM board" 
    ::=  { moduleDefEntry 35 }

moduleDefRoadmNumber OBJECT-TYPE
    SYNTAX      FspR7RoadmNumber
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number for ROADM module typically associated with a Network Fiber or Degree" 
    ::=  { moduleDefEntry 36 }

moduleDefTopology OBJECT-TYPE
    SYNTAX      FspR7Topology
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Shows the card topology in the NE" 
    ::=  { moduleDefEntry 37 }

moduleDefForceConfig OBJECT-TYPE
    SYNTAX      FspR7ForceConfig
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Force cserver to send down configuration to module" 
    ::=  { moduleDefEntry 38 }

moduleDefMuxMethod OBJECT-TYPE
    SYNTAX      FspR7MuxMethod
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Selection of mux method" 
    ::=  { moduleDefEntry 39 }

moduleDefNdpCleanup OBJECT-TYPE
    SYNTAX      FspR7NdpCleanup
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Cleanup Network Data Path allocation" 
    ::=  { moduleDefEntry 40 }

moduleDefRstp OBJECT-TYPE
    SYNTAX      FspR7EnableDisable
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Rapid spanning tree protocol" 
    ::=  { moduleDefEntry 41 }

moduleDefRemoteReset OBJECT-TYPE
    SYNTAX      FspR7RlsMan
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Remote reset of module. This parameter will be available only on SH9HU and SH1HUPF shelves." 
    ::=  { moduleDefEntry 42 }

endOfModuleDefTable OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { eqptMgmtDef 8 }

endOfEqptMgmtDef OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { eqptMgmtDef 10000 }

physicalPortDefTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PhysicalPortDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "physicalPortDefTable"
    ::=  { facilityMgmtDef 1 }

physicalPortDefEntry OBJECT-TYPE
    SYNTAX      PhysicalPortDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "Entry of physicalPortDefTable"
    INDEX       {
                  entityFacilityShelfNo,
                  entityFacilitySlotNo,
                  entityFacilityPortNo,
                  entityFacilityExtNo,
                  entityFacilityClassName
                }
    ::=  { physicalPortDefTable 1 }

PhysicalPortDefEntry ::=  SEQUENCE
  { physicalPortDefRowStatus RowStatus,
    physicalPortDefType FspR7InterfaceType,
    physicalPortDefAdmin FspR7AdminState,
    physicalPortDefAlias SnmpAdminString,
    physicalPortDefAlsMode FspR7AlsMode,
    physicalPortDefAutoThresReset FspR7AutoThresReset,
    physicalPortDefAutonegotiation EnableState,
    physicalPortDefBehaviour FspR7PortBehaviour,
    physicalPortDefDispertionConfig FspR7DispersionConfig,
    physicalPortDefDispersionSetting Integer32,
    physicalPortDefDispersionMode FspR7DispersionModes,
    physicalPortDefChannelProv FspR7ChannelIdentifier,
    physicalPortDefWdmRxChannel FspR7ChannelIdentifier,
    physicalPortDefCodeGain FspR7CodeGain,
    physicalPortDefXfpDecisionThres FspR7XfpDecisionThres,
    physicalPortDefDisparityCorrection EnableState,
    physicalPortDefEqlzAdmin FspR7EqlzAdminState,
    physicalPortDefErrorForwarding FspR7ErrorFwdMode,
    physicalPortDefFecType FspR7FecType,
    physicalPortDefFarEndCommunication FspR7YesNo,
    physicalPortDefFlowControl FspR7FlowControlMode,
    physicalPortDefForceLaserOn FspR7LaserForcedOperation,
    physicalPortDefInhibitSwitchToProt FspR7YesNo,
    physicalPortDefInhibitSwitchToWork FspR7YesNo,
    physicalPortDefLaneChannelSetting FspR7ChannelIdentifier,
    physicalPortDefLoopConfig LoopConfig,
    physicalPortDefLaserDelayTimer FspR7LaserDelayTimer,
    physicalPortDefLaserOffTimer Unsigned32,
    physicalPortDefLaserOnTimer Unsigned32,
    physicalPortDefLaserOffDelayFunction EnableState,
    physicalPortDefAutoPTassignment FspR7ManualAuto,
    physicalPortDefTributarySlotMethod FspR7ManualAuto,
    physicalPortDefInitiateEqualization FspR7InitEqualization,
    physicalPortDefLossAttenuation FspR7LossAttenuation,
    physicalPortDefOpticalSetPoint Integer32,
    physicalPortDefDataLayerPmReset FspR7PmReset,
    physicalPortDefPrbsPmReset FspR7PrbsPmReset,
    physicalPortDefTestPrbsRcvMode FspR7PRBSTest,
    physicalPortDefTestPrbsTrmtMode FspR7PRBSTest,
    physicalPortDefSwitchCommand FspR7APSCommand,
    physicalPortDefOpuPayloadType FspR7OpuPayloadType,
    physicalPortDefSigDegThresSonetLine FspR7BERThreshold,
    physicalPortDefSigDegThresSdhMs Unsigned32,
    physicalPortDefSigDegThresOtu Integer32,
    physicalPortDefSigDegThresOdu Integer32,
    physicalPortDefSigDegThreshold Unsigned32,
    physicalPortDefSigDegPcslThreshold Unsigned32,
    physicalPortDefSigDegThresSonetSection FspR7BERThresholdSection,
    physicalPortDefSigDegThresSdhSection Unsigned32,
    physicalPortDefSigDegThresOduTcmA Integer32,
    physicalPortDefSigDegThresOduTcmB Integer32,
    physicalPortDefSigDegThresOduTcmC Integer32,
    physicalPortDefSignalDegradePeriod Unsigned32,
    physicalPortDefSigDegPeriodOdu Unsigned32,
    physicalPortDefSigDegPeriodOtu Unsigned32,
    physicalPortDefSigDegPeriodIntegration Unsigned32,
    physicalPortDefSigDegPeriodSdhSection Unsigned32,
    physicalPortDefSigDegPeriodOduTcmA Unsigned32,
    physicalPortDefSigDegPeriodOduTcmB Unsigned32,
    physicalPortDefSigDegPeriodOduTcmC Unsigned32,
    physicalPortDefOtnStuffing FspR7Stuff,
    physicalPortDefTcmALevel OtnTcmLevel,
    physicalPortDefTcmBLevel OtnTcmLevel,
    physicalPortDefTcmCLevel OtnTcmLevel,
    physicalPortDefTerminationLevel OhTerminationLevel,
    physicalPortDefTimingSource SonetTimingSource,
    physicalPortDefTimModeOdu TimMode,
    physicalPortDefTimModeOtu TimMode,
    physicalPortDefTimModeSonetSection TimMode,
    physicalPortDefTimModeOduTcmA TimMode,
    physicalPortDefTimModeOduTcmB TimMode,
    physicalPortDefTimModeOduTcmC TimMode,
    physicalPortDefTraceFormSonetSection SonetTraceForm,
    physicalPortDefTraceExpectedSonetSection OCTET STRING,
    physicalPortDefTraceTransmitSonetSection OCTET STRING,
    physicalPortDefTraceExpectedOtu OCTET STRING,
    physicalPortDefTraceTransmitSapiOtu OCTET STRING,
    physicalPortDefTraceTransmitDapiOtu OCTET STRING,
    physicalPortDefTraceTransmitOpspOtu OCTET STRING,
    physicalPortDefTraceExpectedOdu OCTET STRING,
    physicalPortDefTraceTransmitSapiOdu OCTET STRING,
    physicalPortDefTraceTransmitDapiOdu OCTET STRING,
    physicalPortDefTraceTransmitOpspOdu OCTET STRING,
    physicalPortDefTraceExpectedOduTcmA OCTET STRING,
    physicalPortDefTraceTransmitSapiOduTcmA OCTET STRING,
    physicalPortDefTraceTransmitDapiOduTcmA OCTET STRING,
    physicalPortDefTraceTransmitOpspOduTcmA OCTET STRING,
    physicalPortDefTraceExpectedOduTcmB OCTET STRING,
    physicalPortDefTraceTransmitSapiOduTcmB OCTET STRING,
    physicalPortDefTraceTransmitDapiOduTcmB OCTET STRING,
    physicalPortDefTraceTransmitOpspOduTcmB OCTET STRING,
    physicalPortDefTraceExpectedOduTcmC OCTET STRING,
    physicalPortDefTraceTransmitSapiOduTcmC OCTET STRING,
    physicalPortDefTraceTransmitDapiOduTcmC OCTET STRING,
    physicalPortDefTraceTransmitOpspOduTcmC OCTET STRING,
    physicalPortDefTurnupConfig FspR7TurnupConfig,
    physicalPortDefTxOffDelay FspR7EnableDisable,
    physicalPortDefVoaMode FspR7VoaMode,
    physicalPortDefVoaSetpoint Unsigned32,
    physicalPortDefLagPrio Unsigned32,
    physicalPortDefMaxFrameSize Unsigned32,
    physicalPortDefPayload OtnPayloadType,
    physicalPortDefPortMode FspR7PortMode,
    physicalPortDefPortRole FspR7PortRole,
    physicalPortDefPriority Unsigned32,
    physicalPortDefPvid Unsigned32,
    physicalPortDefStagType FspR7SnmpHexString,
    physicalPortDefUtag FspR7UntaggedFrames,
    physicalPortDefVethAid SnmpAdminString,
    physicalPortDefRedLineState FspR7RedLinedState,
    physicalPortDefTunnelAid SnmpAdminString,
    physicalPortDefRateLimit FspR7DisableEnable,
    physicalPortDefTxOffOnTm FspR7TxOffOnTm,
    physicalPortDefTxOffTimer Unsigned32,
    physicalPortDefTxOnTimer Unsigned32 }

physicalPortDefRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Physical Port Capability RowStatus."
    ::=  { physicalPortDefEntry 1 }

physicalPortDefType OBJECT-TYPE
    SYNTAX      FspR7InterfaceType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Physical Port Capability Facility Type."
    ::=  { physicalPortDefEntry 2 }

physicalPortDefAdmin OBJECT-TYPE
    SYNTAX      FspR7AdminState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Physical Port Capability Adminstrative State."
    ::=  { physicalPortDefEntry 3 }

physicalPortDefAlias OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "User Applied Descriptor" 
    ::=  { physicalPortDefEntry 4 }

physicalPortDefAlsMode OBJECT-TYPE
    SYNTAX      FspR7AlsMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Determines the reaction in backward direction in response to a LOS
         on the same Interface: on a Network Interface connected to the DWDM
         this is a matter of laser safety" 
    ::=  { physicalPortDefEntry 5 }

physicalPortDefAutoThresReset OBJECT-TYPE
    SYNTAX      FspR7AutoThresReset
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Adaptive Threshold Control Reset" 
    ::=  { physicalPortDefEntry 6 }

physicalPortDefAutonegotiation OBJECT-TYPE
    SYNTAX      EnableState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Auto Negotiation for the data rate" 
    ::=  { physicalPortDefEntry 7 }

physicalPortDefBehaviour OBJECT-TYPE
    SYNTAX      FspR7PortBehaviour
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Behavior or Port usage based on configuration/usage in the system regardless of faceplate designation" 
    ::=  { physicalPortDefEntry 8 }

physicalPortDefDispertionConfig OBJECT-TYPE
    SYNTAX      FspR7DispersionConfig
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Chromatic Dispersion Compensation" 
    ::=  { physicalPortDefEntry 9 }

physicalPortDefDispersionSetting OBJECT-TYPE
    SYNTAX      Integer32 (-50000..50000) 
    UNITS       "ps/nm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Chromatic Dispersion Compensation setting on module" 
    ::=  { physicalPortDefEntry 10 }

physicalPortDefDispersionMode OBJECT-TYPE
    SYNTAX      FspR7DispersionModes
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Chromatic Dispersion Compensation Mode" 
    ::=  { physicalPortDefEntry 11 }

physicalPortDefChannelProv OBJECT-TYPE
    SYNTAX      FspR7ChannelIdentifier
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Channel" 
    ::=  { physicalPortDefEntry 12 }

physicalPortDefWdmRxChannel OBJECT-TYPE
    SYNTAX      FspR7ChannelIdentifier
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Configuration of Rx optical channel" 
    ::=  { physicalPortDefEntry 13 }

physicalPortDefCodeGain OBJECT-TYPE
    SYNTAX      FspR7CodeGain
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Forward Error Correction Coding gain" 
    ::=  { physicalPortDefEntry 14 }

physicalPortDefXfpDecisionThres OBJECT-TYPE
    SYNTAX      FspR7XfpDecisionThres
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "XFP Decision threshold setting" 
    ::=  { physicalPortDefEntry 15 }

physicalPortDefDisparityCorrection OBJECT-TYPE
    SYNTAX      EnableState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Disparity correction" 
    ::=  { physicalPortDefEntry 16 }

physicalPortDefEqlzAdmin OBJECT-TYPE
    SYNTAX      FspR7EqlzAdminState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Scheduled Equalization Administration" 
    ::=  { physicalPortDefEntry 17 }

physicalPortDefErrorForwarding OBJECT-TYPE
    SYNTAX      FspR7ErrorFwdMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Determines the reaction in forward direction in response to a LOS on
         the interface on the opposite side of the module: may override
         this behaviour in the interests of laser safety." 
    ::=  { physicalPortDefEntry 18 }

physicalPortDefFecType OBJECT-TYPE
    SYNTAX      FspR7FecType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Forward Error Correction (Only relevant where TYPE = OTU#)" 
    ::=  { physicalPortDefEntry 19 }

physicalPortDefFarEndCommunication OBJECT-TYPE
    SYNTAX      FspR7YesNo
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Used for Optojack plugs; Communication to Far End Plug is observed" 
    ::=  { physicalPortDefEntry 20 }

physicalPortDefFlowControl OBJECT-TYPE
    SYNTAX      FspR7FlowControlMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Flow Control mechanism" 
    ::=  { physicalPortDefEntry 21 }

physicalPortDefForceLaserOn OBJECT-TYPE
    SYNTAX      FspR7LaserForcedOperation
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Laser Forced On" 
    ::=  { physicalPortDefEntry 22 }

physicalPortDefInhibitSwitchToProt OBJECT-TYPE
    SYNTAX      FspR7YesNo
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Inhibit Switch to protection facility. Inhibition blocks an automatic switch
         to the protection facility. Valid only for the working facility."
    ::=  { physicalPortDefEntry 23 }

physicalPortDefInhibitSwitchToWork OBJECT-TYPE
    SYNTAX      FspR7YesNo
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Inhibit Switch to working facility. Inhibition blocks an automatic switch to the
         working facility. Valid only for the protection facility."
    ::=  { physicalPortDefEntry 24 }

physicalPortDefLaneChannelSetting OBJECT-TYPE
    SYNTAX      FspR7ChannelIdentifier
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lane Channel Setting" 
    ::=  { physicalPortDefEntry 25 }

physicalPortDefLoopConfig OBJECT-TYPE
    SYNTAX      LoopConfig
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "The configuration of the loopback function.
         - noLoop: no loop configuration on the interface.
         - lineLoop: the incoming signal is looped to the outgoing
         line on the interface. The incoming signal is sent in the
         downstream direction and processed as normal.
         - inwardLoop: the output signal is looped to the incoming line
         on the interface. The looped signal is transmitted unchanged on
         the optical output."
    ::=  { physicalPortDefEntry 26 }

physicalPortDefLaserDelayTimer OBJECT-TYPE
    SYNTAX      FspR7LaserDelayTimer
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Relevant only when ERRFWD=LSROFF. Enables/disables the
         possibility to delay turning off and on the laser.
         This applies to the case when turning off the laser
         is done as an error forwarding mechanism." 
    ::=  { physicalPortDefEntry 27 }

physicalPortDefLaserOffTimer OBJECT-TYPE
    SYNTAX      Unsigned32 (1..1000) 
    UNITS       "ms"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Delay before laser is swiched off" 
    ::=  { physicalPortDefEntry 28 }

physicalPortDefLaserOnTimer OBJECT-TYPE
    SYNTAX      Unsigned32 (1..1000) 
    UNITS       "ms"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Delay before laser is switched on" 
    ::=  { physicalPortDefEntry 29 }

physicalPortDefLaserOffDelayFunction OBJECT-TYPE
    SYNTAX      EnableState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "A configuration request for the Laser Off Delay function. This function
         delays turning off the laser as a consequent action to a defect."
    ::=  { physicalPortDefEntry 30 }

physicalPortDefAutoPTassignment OBJECT-TYPE
    SYNTAX      FspR7ManualAuto
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Auto assignment of ODU PT" 
    ::=  { physicalPortDefEntry 31 }

physicalPortDefTributarySlotMethod OBJECT-TYPE
    SYNTAX      FspR7ManualAuto
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Tributary Slot assignment method" 
    ::=  { physicalPortDefEntry 32 }

physicalPortDefInitiateEqualization OBJECT-TYPE
    SYNTAX      FspR7InitEqualization
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Initiate Equalization" 
    ::=  { physicalPortDefEntry 33 }

physicalPortDefLossAttenuation OBJECT-TYPE
    SYNTAX      FspR7LossAttenuation
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "LOS Attenuation Finding in progress" 
    ::=  { physicalPortDefEntry 34 }

physicalPortDefOpticalSetPoint OBJECT-TYPE
    SYNTAX      Integer32 (-250..50) 
    UNITS       "0.1 dBm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Sets the optical power for power equalization in ROADM or for channel power control in OPCM" 
    ::=  { physicalPortDefEntry 35 }

physicalPortDefDataLayerPmReset OBJECT-TYPE
    SYNTAX      FspR7PmReset
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Reset data-layer Performance registers" 
    ::=  { physicalPortDefEntry 36 }

physicalPortDefPrbsPmReset OBJECT-TYPE
    SYNTAX      FspR7PrbsPmReset
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Reset PRBS PM counters" 
    ::=  { physicalPortDefEntry 37 }

physicalPortDefTestPrbsRcvMode OBJECT-TYPE
    SYNTAX      FspR7PRBSTest
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "PRBS test pattern received" 
    ::=  { physicalPortDefEntry 38 }

physicalPortDefTestPrbsTrmtMode OBJECT-TYPE
    SYNTAX      FspR7PRBSTest
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "PRBS test pattern transmitted" 
    ::=  { physicalPortDefEntry 39 }

physicalPortDefSwitchCommand OBJECT-TYPE
    SYNTAX      FspR7APSCommand
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "The switch command action for this facility. A command resulting
         in a switch event will also cause a change of the facility secondary state
         and a corresponding condition. Addressed by this command is the active port,
         the port to switch away from. Since this is a manual switch command, it will
         not switch if other port suffers from a signalfailure or a signal degrade."
    ::=  { physicalPortDefEntry 40 }

physicalPortDefOpuPayloadType OBJECT-TYPE
    SYNTAX      FspR7OpuPayloadType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "OPU Payload Type Indicator" 
    ::=  { physicalPortDefEntry 41 }

physicalPortDefSigDegThresSonetLine OBJECT-TYPE
    SYNTAX      FspR7BERThreshold
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Bit-Error-Based Degradation Definition for SONET (standard integration period)" 
    ::=  { physicalPortDefEntry 42 }

physicalPortDefSigDegThresSdhMs OBJECT-TYPE
    SYNTAX      Unsigned32 (1..100) 
    UNITS       "%"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Block-Error-Based Degradation Definition for SDH (standard integration period).
         Defined as percentage Background Block Errors (30% default) evaluated
         over a defined period (SDPER-RS)." 
    ::=  { physicalPortDefEntry 43 }

physicalPortDefSigDegThresOtu OBJECT-TYPE
    SYNTAX      Integer32 (1..100) 
    UNITS       "%"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Background-Block-Error-Based Signal Degradation Definition for OTU" 
    ::=  { physicalPortDefEntry 44 }

physicalPortDefSigDegThresOdu OBJECT-TYPE
    SYNTAX      Integer32 (1..100) 
    UNITS       "%"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Background-Block-Error-Based Signal Degradation Definition for ODU" 
    ::=  { physicalPortDefEntry 45 }

physicalPortDefSigDegThreshold OBJECT-TYPE
    SYNTAX      Unsigned32 (1..10000)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Threshold for number of errors (CV or CV+DE) in one second" 
    ::=  { physicalPortDefEntry 46 }

physicalPortDefSigDegPcslThreshold OBJECT-TYPE
    SYNTAX      Unsigned32 (1..100) 
    UNITS       "%"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Block-Error-Based Degradation Definition for Physical Coding Sublayer" 
    ::=  { physicalPortDefEntry 47 }

physicalPortDefSigDegThresSonetSection OBJECT-TYPE
    SYNTAX      FspR7BERThresholdSection
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Bit-Error-Based Degradation Definition for SONET (standard integration period)" 
    ::=  { physicalPortDefEntry 48 }

physicalPortDefSigDegThresSdhSection OBJECT-TYPE
    SYNTAX      Unsigned32 (1..100) 
    UNITS       "%"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Block-Error-Based Degradation Definition for SDH (standard integration period).
         Defined as percentage Background Block Errors (30% default) evaluated
         over a defined period (SDPER-RS)." 
    ::=  { physicalPortDefEntry 49 }

physicalPortDefSigDegThresOduTcmA OBJECT-TYPE
    SYNTAX      Integer32 (1..100) 
    UNITS       "%"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Background-Block-Error-Based Signal Degradation Definition for TCM-A" 
    ::=  { physicalPortDefEntry 50 }

physicalPortDefSigDegThresOduTcmB OBJECT-TYPE
    SYNTAX      Integer32 (1..100) 
    UNITS       "%"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Background-Block-Error-Based Signal Degradation Definition for TCM-B" 
    ::=  { physicalPortDefEntry 51 }

physicalPortDefSigDegThresOduTcmC OBJECT-TYPE
    SYNTAX      Integer32 (1..100) 
    UNITS       "%"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Background-Block-Error-Based Signal Degradation Definition for TCM-C" 
    ::=  { physicalPortDefEntry 52 }

physicalPortDefSignalDegradePeriod OBJECT-TYPE
    SYNTAX      Unsigned32 (2..10) 
    UNITS       "s"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "The measurement period in seconds used together with
         the deployProvIfSigDegThresSdhRegSect based on the block error counting method.
         The valid range is 2..10,
         The default being 7."
    ::=  { physicalPortDefEntry 53 }

physicalPortDefSigDegPeriodOdu OBJECT-TYPE
    SYNTAX      Unsigned32 (2..10) 
    UNITS       "s"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Integration Period for Signal degrade" 
    ::=  { physicalPortDefEntry 54 }

physicalPortDefSigDegPeriodOtu OBJECT-TYPE
    SYNTAX      Unsigned32 (2..10) 
    UNITS       "s"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Integration Period for Signal degrade" 
    ::=  { physicalPortDefEntry 55 }

physicalPortDefSigDegPeriodIntegration OBJECT-TYPE
    SYNTAX      Unsigned32 (1..10) 
    UNITS       "s"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Integration Period for Signal degrade" 
    ::=  { physicalPortDefEntry 56 }

physicalPortDefSigDegPeriodSdhSection OBJECT-TYPE
    SYNTAX      Unsigned32 (2..10) 
    UNITS       "s"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Provisionable Signal Degrade Integration Period for SDH" 
    ::=  { physicalPortDefEntry 57 }

physicalPortDefSigDegPeriodOduTcmA OBJECT-TYPE
    SYNTAX      Unsigned32 (2..10) 
    UNITS       "s"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Integration Period for Signal degrade" 
    ::=  { physicalPortDefEntry 58 }

physicalPortDefSigDegPeriodOduTcmB OBJECT-TYPE
    SYNTAX      Unsigned32 (2..10) 
    UNITS       "s"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Integration Period of TCMB Signal Segrade" 
    ::=  { physicalPortDefEntry 59 }

physicalPortDefSigDegPeriodOduTcmC OBJECT-TYPE
    SYNTAX      Unsigned32 (2..10) 
    UNITS       "s"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Integration Period of TCMC Signal Segrade" 
    ::=  { physicalPortDefEntry 60 }

physicalPortDefOtnStuffing OBJECT-TYPE
    SYNTAX      FspR7Stuff
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates if bit/byte stuffing is used in the transport signal." 
    ::=  { physicalPortDefEntry 61 }

physicalPortDefTcmALevel OBJECT-TYPE
    SYNTAX      OtnTcmLevel
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Activation of Tandem Connection Monitoring Instance A" 
    ::=  { physicalPortDefEntry 62 }

physicalPortDefTcmBLevel OBJECT-TYPE
    SYNTAX      OtnTcmLevel
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Activation of Tandem Connection Monitoring Instance B" 
    ::=  { physicalPortDefEntry 63 }

physicalPortDefTcmCLevel OBJECT-TYPE
    SYNTAX      OtnTcmLevel
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Activation of Tandem Connection Monitoring Instance C" 
    ::=  { physicalPortDefEntry 64 }

physicalPortDefTerminationLevel OBJECT-TYPE
    SYNTAX      OhTerminationLevel
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The entity is Addressable by Management [because its supporting entity is defined in the database and therefore its address existsSignal Tremination Level of Intrusive Access to Header Information.
         Not used in 7.0, monitoring is one layer higher than TERM level,
         if applicable. All conditions detected on monitoring layer will not
         be reported (severity degradated to NR)." 
    ::=  { physicalPortDefEntry 65 }

physicalPortDefTimingSource OBJECT-TYPE
    SYNTAX      SonetTimingSource
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "The timing source for this interface.
         - internal: used in stand-alone, point-to-point topologies stand-alone (dedicated fiber operation).
         - loopTiming: e.g. used in point-to-point via SONET network and feeder topologies. The default is
         internal(1)."
    ::=  { physicalPortDefEntry 66 }

physicalPortDefTimModeOdu OBJECT-TYPE
    SYNTAX      TimMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Detection of TIM-ODU Condition can be configured" 
    ::=  { physicalPortDefEntry 67 }

physicalPortDefTimModeOtu OBJECT-TYPE
    SYNTAX      TimMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Detection of TIM-OTU Condition can be configured" 
    ::=  { physicalPortDefEntry 68 }

physicalPortDefTimModeSonetSection OBJECT-TYPE
    SYNTAX      TimMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Detection of TIM Sonet Section Condition can be configured" 
    ::=  { physicalPortDefEntry 69 }

physicalPortDefTimModeOduTcmA OBJECT-TYPE
    SYNTAX      TimMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Detection of TIM-TCMA Condition can be configured" 
    ::=  { physicalPortDefEntry 70 }

physicalPortDefTimModeOduTcmB OBJECT-TYPE
    SYNTAX      TimMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Detection of TIM-TCMB Condition can be configured" 
    ::=  { physicalPortDefEntry 71 }

physicalPortDefTimModeOduTcmC OBJECT-TYPE
    SYNTAX      TimMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Detection of TIM-TCMC Condition can be configured" 
    ::=  { physicalPortDefEntry 72 }

physicalPortDefTraceFormSonetSection OBJECT-TYPE
    SYNTAX      SonetTraceForm
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Byte-Length of Trace Compared to Expected" 
    ::=  { physicalPortDefEntry 73 }

physicalPortDefTraceExpectedSonetSection OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..62))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Expected Sec/RS trace. NULL TRACE implies that no trace comparison is made." 
    ::=  { physicalPortDefEntry 74 }

physicalPortDefTraceTransmitSonetSection OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..62))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Sec/RS Trace to be Transmitted" 
    ::=  { physicalPortDefEntry 75 }

physicalPortDefTraceExpectedOtu OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Expected SAPI part of the OTU trace (15 character). NULL TRACE implies that no trace comparison is made." 
    ::=  { physicalPortDefEntry 76 }

physicalPortDefTraceTransmitSapiOtu OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted SAPI part of the OTU trace (15 character)" 
    ::=  { physicalPortDefEntry 77 }

physicalPortDefTraceTransmitDapiOtu OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted DAPI part of the OTU trace (15 character)" 
    ::=  { physicalPortDefEntry 78 }

physicalPortDefTraceTransmitOpspOtu OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted Operator Specific part of the OTU trace (32 character)" 
    ::=  { physicalPortDefEntry 79 }

physicalPortDefTraceExpectedOdu OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Expected SAPI part of the ODU trace (15 character). NULL TRACE implies that no trace comparison is made." 
    ::=  { physicalPortDefEntry 80 }

physicalPortDefTraceTransmitSapiOdu OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted SAPI part of the ODU trace (15 character)" 
    ::=  { physicalPortDefEntry 81 }

physicalPortDefTraceTransmitDapiOdu OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted DAPI part of the ODU trace (15 character)" 
    ::=  { physicalPortDefEntry 82 }

physicalPortDefTraceTransmitOpspOdu OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted Operator Specific part of the ODU trace (32 character)" 
    ::=  { physicalPortDefEntry 83 }

physicalPortDefTraceExpectedOduTcmA OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Expected SAPI part of the TCMA trace (15 character). NULL TRACE-TCM implies that no trace comparison is made." 
    ::=  { physicalPortDefEntry 84 }

physicalPortDefTraceTransmitSapiOduTcmA OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted SAPI part of the TCMA trace (15 character)" 
    ::=  { physicalPortDefEntry 85 }

physicalPortDefTraceTransmitDapiOduTcmA OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted DAPI part of the TCMA trace (15 character)" 
    ::=  { physicalPortDefEntry 86 }

physicalPortDefTraceTransmitOpspOduTcmA OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted Operator Specific part of the TCMA trace (32 character)" 
    ::=  { physicalPortDefEntry 87 }

physicalPortDefTraceExpectedOduTcmB OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Expected SAPI part of the TCMB trace (15 character). NULL TRACE-TCM implies that no trace comparison is made." 
    ::=  { physicalPortDefEntry 88 }

physicalPortDefTraceTransmitSapiOduTcmB OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted SAPI part of the TCMB trace (15 character)" 
    ::=  { physicalPortDefEntry 89 }

physicalPortDefTraceTransmitDapiOduTcmB OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted DAPI part of the TCMB trace (15 character)" 
    ::=  { physicalPortDefEntry 90 }

physicalPortDefTraceTransmitOpspOduTcmB OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted Operator Specific part of the TCMB trace (32 character)" 
    ::=  { physicalPortDefEntry 91 }

physicalPortDefTraceExpectedOduTcmC OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Expected SAPI part of the TCMC trace (15 character). NULL TRACE-TCM implies that no trace comparison is made." 
    ::=  { physicalPortDefEntry 92 }

physicalPortDefTraceTransmitSapiOduTcmC OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted SAPI part of the TCMC trace (15 character)" 
    ::=  { physicalPortDefEntry 93 }

physicalPortDefTraceTransmitDapiOduTcmC OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted DAPI part of the TCMC trace (15 character)" 
    ::=  { physicalPortDefEntry 94 }

physicalPortDefTraceTransmitOpspOduTcmC OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted Operator Specific part of the TCMC trace (32 character)" 
    ::=  { physicalPortDefEntry 95 }

physicalPortDefTurnupConfig OBJECT-TYPE
    SYNTAX      FspR7TurnupConfig
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Turnup Operation" 
    ::=  { physicalPortDefEntry 96 }

physicalPortDefTxOffDelay OBJECT-TYPE
    SYNTAX      FspR7EnableDisable
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Enable or disable TXOFFHOLD Period for Error Forwarding and LKDO-OFF Consequent Action." 
    ::=  { physicalPortDefEntry 97 }

physicalPortDefVoaMode OBJECT-TYPE
    SYNTAX      FspR7VoaMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "VOA operating mode" 
    ::=  { physicalPortDefEntry 98 }

physicalPortDefVoaSetpoint OBJECT-TYPE
    SYNTAX      Unsigned32 (0..300) 
    UNITS       "0.1 dB"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Sets the optical attenuation of VOA" 
    ::=  { physicalPortDefEntry 99 }

physicalPortDefLagPrio OBJECT-TYPE
    SYNTAX      Unsigned32 (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Part of ID. Port pri that defines standby." 
    ::=  { physicalPortDefEntry 100 }

physicalPortDefMaxFrameSize OBJECT-TYPE
    SYNTAX      Unsigned32 (1518..9600)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Max Frame Size" 
    ::=  { physicalPortDefEntry 101 }

physicalPortDefPayload OBJECT-TYPE
    SYNTAX      OtnPayloadType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The PAYLOAD defines the transport service type of the payload" 
    ::=  { physicalPortDefEntry 102 }

physicalPortDefPortMode OBJECT-TYPE
    SYNTAX      FspR7PortMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Port Mode" 
    ::=  { physicalPortDefEntry 103 }

physicalPortDefPortRole OBJECT-TYPE
    SYNTAX      FspR7PortRole
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "ADVA cloud Port Roles" 
    ::=  { physicalPortDefEntry 104 }

physicalPortDefPriority OBJECT-TYPE
    SYNTAX      Unsigned32 (0..7)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Default PCP in case UTAG is Enabled. The Prio may be remapped in the EVC." 
    ::=  { physicalPortDefEntry 105 }

physicalPortDefPvid OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4095)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Default VLAN ID (both STAG/CTAG mode) in case UTAG is enabled" 
    ::=  { physicalPortDefEntry 106 }

physicalPortDefStagType OBJECT-TYPE
    SYNTAX      FspR7SnmpHexString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "TAG type field" 
    ::=  { physicalPortDefEntry 107 }

physicalPortDefUtag OBJECT-TYPE
    SYNTAX      FspR7UntaggedFrames
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "If untagged frames shall be enabled on this port or not." 
    ::=  { physicalPortDefEntry 108 }

physicalPortDefVethAid OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Shows if PORT is a member in the LAG with the VETH AID" 
    ::=  { physicalPortDefEntry 109 }

physicalPortDefRedLineState OBJECT-TYPE
    SYNTAX      FspR7RedLinedState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "will be set by higher level software to act as a barrier to deletion" 
    ::=  { physicalPortDefEntry 110 }

physicalPortDefTunnelAid OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Tunnel AID" 
    ::=  { physicalPortDefEntry 111 }

physicalPortDefRateLimit OBJECT-TYPE
    SYNTAX      FspR7DisableEnable
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Selection to apply rate limit feature or not." 
    ::=  { physicalPortDefEntry 112 }

physicalPortDefTxOffOnTm OBJECT-TYPE
    SYNTAX      FspR7TxOffOnTm
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Relevant only when ERRFWD=TXOFF. Enables/disables the
         possibility to delay turning off and on the the transmitter.
         This applies to the case when turning off the transmitter
         is done as an error forwarding mechanism." 
    ::=  { physicalPortDefEntry 113 }

physicalPortDefTxOffTimer OBJECT-TYPE
    SYNTAX      Unsigned32 (1..1000) 
    UNITS       "ms"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Delay before transmitter is swiched off" 
    ::=  { physicalPortDefEntry 114 }

physicalPortDefTxOnTimer OBJECT-TYPE
    SYNTAX      Unsigned32 (1..1000) 
    UNITS       "ms"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Delay before transmitter is switched on" 
    ::=  { physicalPortDefEntry 115 }

virtualPortDefTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF VirtualPortDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "virtualPortDefTable"
    ::=  { facilityMgmtDef 2 }

virtualPortDefEntry OBJECT-TYPE
    SYNTAX      VirtualPortDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "Entry of virtualPortDefTable"
    INDEX       {
                  entityFacilityShelfNo,
                  entityFacilitySlotNo,
                  entityFacilityPortNo,
                  entityFacilityExtNo,
                  entityFacilityClassName
                }
    ::=  { virtualPortDefTable 1 }

VirtualPortDefEntry ::=  SEQUENCE
  { virtualPortDefRowStatus RowStatus,
    virtualPortDefChannelBand FspR7ChannelBandwidth,
    virtualPortDefType FspR7InterfaceType,
    virtualPortDefAlias SnmpAdminString,
    virtualPortDefAdmin FspR7AdminState,
    virtualPortDefEqlzAdmin FspR7EqlzAdminState,
    virtualPortDefInitEqlz FspR7InitEqualization,
    virtualPortDefLacpMode FspR7LacpMode,
    virtualPortDefLacpTimeout FspR7LacpTimeout,
    virtualPortDefLagActivePorts Unsigned32,
    virtualPortDefMaxFrameSize Unsigned32,
    virtualPortDefPortMode FspR7PortMode,
    virtualPortDefDataLayerPmReset FspR7PmReset,
    virtualPortDefPortRole FspR7PortRole,
    virtualPortDefLagPortType FspR7LagPortType,
    virtualPortDefPriority Unsigned32,
    virtualPortDefPvid Unsigned32,
    virtualPortDefRevertiveMode ApsRevertMode,
    virtualPortDefStagType FspR7SnmpHexString,
    virtualPortDefUtag FspR7UntaggedFrames,
    virtualPortDefBundle FspR7SnmpLongString,
    virtualPortDefSwitchCommand FspR7APSCommand,
    virtualPortDefInhibitSwitchToWork FspR7YesNo,
    virtualPortDefInhibitSwitchToProt FspR7YesNo,
    virtualPortDefOduTribPortNo SnmpAdminString,
    virtualPortDefOduTribTimeSlottNo SnmpAdminString,
    virtualPortDefSigDegThresOdu Integer32,
    virtualPortDefSigDegPeriodOdu Unsigned32,
    virtualPortDefTraceExpectedOdu OCTET STRING,
    virtualPortDefTraceTransmitSapiOdu OCTET STRING,
    virtualPortDefTraceTransmitDapiOdu OCTET STRING,
    virtualPortDefTraceTransmitOpspOdu OCTET STRING,
    virtualPortDefTimModeOdu TimMode,
    virtualPortDefSigDegThresOduTcmA Integer32,
    virtualPortDefSigDegPeriodOduTcmA Unsigned32,
    virtualPortDefSigDegThresOduTcmB Integer32,
    virtualPortDefSigDegPeriodOduTcmB Unsigned32,
    virtualPortDefSigDegThresOduTcmC Integer32,
    virtualPortDefSigDegPeriodOduTcmC Unsigned32,
    virtualPortDefTcmALevel OtnTcmLevel,
    virtualPortDefTcmBLevel OtnTcmLevel,
    virtualPortDefTcmCLevel OtnTcmLevel,
    virtualPortDefTraceTransmitSapiOduTcmA OCTET STRING,
    virtualPortDefTraceTransmitDapiOduTcmA OCTET STRING,
    virtualPortDefTraceTransmitOpspOduTcmA OCTET STRING,
    virtualPortDefTraceExpectedOduTcmA OCTET STRING,
    virtualPortDefTimModeOduTcmA TimMode,
    virtualPortDefTraceExpectedOduTcmB OCTET STRING,
    virtualPortDefTraceTransmitSapiOduTcmB OCTET STRING,
    virtualPortDefTraceTransmitDapiOduTcmB OCTET STRING,
    virtualPortDefTraceTransmitOpspOduTcmB OCTET STRING,
    virtualPortDefTimModeOduTcmB TimMode,
    virtualPortDefTraceExpectedOduTcmC OCTET STRING,
    virtualPortDefTraceTransmitSapiOduTcmC OCTET STRING,
    virtualPortDefTraceTransmitDapiOduTcmC OCTET STRING,
    virtualPortDefTraceTransmitOpspOduTcmC OCTET STRING,
    virtualPortDefTimModeOduTcmC TimMode,
    virtualPortDefTerminationLevel OhTerminationLevel,
    virtualPortDefLoopConfig LoopConfig,
    virtualPortDefVcType VirtualContainerType,
    virtualPortDefCir Unsigned32,
    virtualPortDefOpuPayloadType FspR7OpuPayloadType,
    virtualPortDefOtnStuffing FspR7Stuff,
    virtualPortDefRedLineState FspR7RedLinedState,
    virtualPortDefTunnelAid SnmpAdminString }

virtualPortDefRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Virtual Port Capability RowStatus."
    ::=  { virtualPortDefEntry 1 }

virtualPortDefChannelBand OBJECT-TYPE
    SYNTAX      FspR7ChannelBandwidth
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Virtual Port Capability Channel Bandwidth."
    ::=  { virtualPortDefEntry 2 }

virtualPortDefType OBJECT-TYPE
    SYNTAX      FspR7InterfaceType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Virtual Port Capability Facility Type."
    ::=  { virtualPortDefEntry 3 }

virtualPortDefAlias OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Virtual Port Capability Alias."
    ::=  { virtualPortDefEntry 4 }

virtualPortDefAdmin OBJECT-TYPE
    SYNTAX      FspR7AdminState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Virtual Port Capability Adminstrative State."
    ::=  { virtualPortDefEntry 5 }

virtualPortDefEqlzAdmin OBJECT-TYPE
    SYNTAX      FspR7EqlzAdminState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Virtual Port Capability Fiber Connection Attenuation."
    ::=  { virtualPortDefEntry 6 }

virtualPortDefInitEqlz OBJECT-TYPE
    SYNTAX      FspR7InitEqualization
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Virtual Port Capability Initiate Equalization."
    ::=  { virtualPortDefEntry 7 }

virtualPortDefLacpMode OBJECT-TYPE
    SYNTAX      FspR7LacpMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Enable of LACP state machine" 
    ::=  { virtualPortDefEntry 8 }

virtualPortDefLacpTimeout OBJECT-TYPE
    SYNTAX      FspR7LacpTimeout
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Timeout of the LACP" 
    ::=  { virtualPortDefEntry 9 }

virtualPortDefLagActivePorts OBJECT-TYPE
    SYNTAX      Unsigned32 (1..12)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of active ports in the Link Aggregation Group" 
    ::=  { virtualPortDefEntry 10 }

virtualPortDefMaxFrameSize OBJECT-TYPE
    SYNTAX      Unsigned32 (1518..9600)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Max Frame Size" 
    ::=  { virtualPortDefEntry 11 }

virtualPortDefPortMode OBJECT-TYPE
    SYNTAX      FspR7PortMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Port Mode" 
    ::=  { virtualPortDefEntry 12 }

virtualPortDefDataLayerPmReset OBJECT-TYPE
    SYNTAX      FspR7PmReset
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Reset data-layer Performance registers" 
    ::=  { virtualPortDefEntry 13 }

virtualPortDefPortRole OBJECT-TYPE
    SYNTAX      FspR7PortRole
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "ADVA cloud Port Roles" 
    ::=  { virtualPortDefEntry 14 }

virtualPortDefLagPortType OBJECT-TYPE
    SYNTAX      FspR7LagPortType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Type/Speed of connected ports in the Link Aggregation Group" 
    ::=  { virtualPortDefEntry 15 }

virtualPortDefPriority OBJECT-TYPE
    SYNTAX      Unsigned32 (0..7)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Default PCP in case UTAG is Enabled. The Prio may be remapped in the EVC." 
    ::=  { virtualPortDefEntry 16 }

virtualPortDefPvid OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4095)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Default VLAN ID (both STAG/CTAG mode) in case UTAG is enabled" 
    ::=  { virtualPortDefEntry 17 }

virtualPortDefRevertiveMode OBJECT-TYPE
    SYNTAX      ApsRevertMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Revertive Protection Switching" 
    ::=  { virtualPortDefEntry 18 }

virtualPortDefStagType OBJECT-TYPE
    SYNTAX      FspR7SnmpHexString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "TAG type field" 
    ::=  { virtualPortDefEntry 19 }

virtualPortDefUtag OBJECT-TYPE
    SYNTAX      FspR7UntaggedFrames
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "If untagged frames shall be enabled on this port or not." 
    ::=  { virtualPortDefEntry 20 }

virtualPortDefBundle OBJECT-TYPE
    SYNTAX      FspR7SnmpLongString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "List of VC4/VC3/STS1/STS3c/STS24c/STS48c containers used in the BUNDLE" 
    ::=  { virtualPortDefEntry 21 }

virtualPortDefSwitchCommand OBJECT-TYPE
    SYNTAX      FspR7APSCommand
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "The switch command action for this facility. A command resulting
         in a switch event will also cause a change of the facility secondary state
         and a corresponding condition. Addressed by this command is the active port,
         the port to switch away from. Since this is a manual switch command, it will
         not switch if other port suffers from a signalfailure or a signal degrade."
    ::=  { virtualPortDefEntry 22 }

virtualPortDefInhibitSwitchToWork OBJECT-TYPE
    SYNTAX      FspR7YesNo
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Inhibit Switch to working facility. Inhibition blocks an automatic switch to the
         working facility. Valid only for the protection facility."
    ::=  { virtualPortDefEntry 23 }

virtualPortDefInhibitSwitchToProt OBJECT-TYPE
    SYNTAX      FspR7YesNo
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Inhibit Switch to protection facility. Inhibition blocks an automatic switch
         to the protection facility. Valid only for the working facility."
    ::=  { virtualPortDefEntry 24 }

virtualPortDefOduTribPortNo OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "ODU Tributary Port Number" 
    ::=  { virtualPortDefEntry 25 }

virtualPortDefOduTribTimeSlottNo OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "ODU Tributary slot number. Multiple values can be entered as a string, separated by commas or given as a range.
         For capabilities objects possible number of slots and valid range are displayed in a form:
         [1,2,3,8][count: 1-1]
         In first brackets valid slots are shown and in the second possible number of slots."
    ::=  { virtualPortDefEntry 26 }

virtualPortDefSigDegThresOdu OBJECT-TYPE
    SYNTAX      Integer32 (1..100) 
    UNITS       "%"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Background-Block-Error-Based Signal Degradation Definition for ODU" 
    ::=  { virtualPortDefEntry 27 }

virtualPortDefSigDegPeriodOdu OBJECT-TYPE
    SYNTAX      Unsigned32 (2..10) 
    UNITS       "s"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Integration Period for Signal degrade" 
    ::=  { virtualPortDefEntry 28 }

virtualPortDefTraceExpectedOdu OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Expected SAPI part of the ODU trace (15 character). NULL TRACE implies that no trace comparison is made." 
    ::=  { virtualPortDefEntry 29 }

virtualPortDefTraceTransmitSapiOdu OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted SAPI part of the ODU trace (15 character)" 
    ::=  { virtualPortDefEntry 30 }

virtualPortDefTraceTransmitDapiOdu OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted DAPI part of the ODU trace (15 character)" 
    ::=  { virtualPortDefEntry 31 }

virtualPortDefTraceTransmitOpspOdu OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted Operator Specific part of the ODU trace (32 character)" 
    ::=  { virtualPortDefEntry 32 }

virtualPortDefTimModeOdu OBJECT-TYPE
    SYNTAX      TimMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Detection of TIM-ODU Condition can be configured" 
    ::=  { virtualPortDefEntry 33 }

virtualPortDefSigDegThresOduTcmA OBJECT-TYPE
    SYNTAX      Integer32 (1..100) 
    UNITS       "%"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Background-Block-Error-Based Signal Degradation Definition for TCM-A" 
    ::=  { virtualPortDefEntry 34 }

virtualPortDefSigDegPeriodOduTcmA OBJECT-TYPE
    SYNTAX      Unsigned32 (2..10) 
    UNITS       "s"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Integration Period for Signal degrade" 
    ::=  { virtualPortDefEntry 35 }

virtualPortDefSigDegThresOduTcmB OBJECT-TYPE
    SYNTAX      Integer32 (1..100) 
    UNITS       "%"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Background-Block-Error-Based Signal Degradation Definition for TCM-B" 
    ::=  { virtualPortDefEntry 36 }

virtualPortDefSigDegPeriodOduTcmB OBJECT-TYPE
    SYNTAX      Unsigned32 (2..10) 
    UNITS       "s"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Integration Period of TCMB Signal Segrade" 
    ::=  { virtualPortDefEntry 37 }

virtualPortDefSigDegThresOduTcmC OBJECT-TYPE
    SYNTAX      Integer32 (1..100) 
    UNITS       "%"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Background-Block-Error-Based Signal Degradation Definition for TCM-C" 
    ::=  { virtualPortDefEntry 38 }

virtualPortDefSigDegPeriodOduTcmC OBJECT-TYPE
    SYNTAX      Unsigned32 (2..10) 
    UNITS       "s"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Integration Period of TCMC Signal Segrade" 
    ::=  { virtualPortDefEntry 39 }

virtualPortDefTcmALevel OBJECT-TYPE
    SYNTAX      OtnTcmLevel
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Activation of Tandem Connection Monitoring Instance A" 
    ::=  { virtualPortDefEntry 40 }

virtualPortDefTcmBLevel OBJECT-TYPE
    SYNTAX      OtnTcmLevel
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Activation of Tandem Connection Monitoring Instance B" 
    ::=  { virtualPortDefEntry 41 }

virtualPortDefTcmCLevel OBJECT-TYPE
    SYNTAX      OtnTcmLevel
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Activation of Tandem Connection Monitoring Instance C" 
    ::=  { virtualPortDefEntry 42 }

virtualPortDefTraceTransmitSapiOduTcmA OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted SAPI part of the TCMA trace (15 character)" 
    ::=  { virtualPortDefEntry 43 }

virtualPortDefTraceTransmitDapiOduTcmA OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted DAPI part of the TCMA trace (15 character)" 
    ::=  { virtualPortDefEntry 44 }

virtualPortDefTraceTransmitOpspOduTcmA OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted Operator Specific part of the TCMA trace (32 character)" 
    ::=  { virtualPortDefEntry 45 }

virtualPortDefTraceExpectedOduTcmA OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Expected SAPI part of the TCMA trace (15 character). NULL TRACE-TCM implies that no trace comparison is made." 
    ::=  { virtualPortDefEntry 46 }

virtualPortDefTimModeOduTcmA OBJECT-TYPE
    SYNTAX      TimMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Detection of TIM-TCMA Condition can be configured" 
    ::=  { virtualPortDefEntry 47 }

virtualPortDefTraceExpectedOduTcmB OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Expected SAPI part of the TCMB trace (15 character). NULL TRACE-TCM implies that no trace comparison is made." 
    ::=  { virtualPortDefEntry 48 }

virtualPortDefTraceTransmitSapiOduTcmB OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted SAPI part of the TCMB trace (15 character)" 
    ::=  { virtualPortDefEntry 49 }

virtualPortDefTraceTransmitDapiOduTcmB OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted DAPI part of the TCMB trace (15 character)" 
    ::=  { virtualPortDefEntry 50 }

virtualPortDefTraceTransmitOpspOduTcmB OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted Operator Specific part of the TCMB trace (32 character)" 
    ::=  { virtualPortDefEntry 51 }

virtualPortDefTimModeOduTcmB OBJECT-TYPE
    SYNTAX      TimMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Detection of TIM-TCMB Condition can be configured" 
    ::=  { virtualPortDefEntry 52 }

virtualPortDefTraceExpectedOduTcmC OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Expected SAPI part of the TCMC trace (15 character). NULL TRACE-TCM implies that no trace comparison is made." 
    ::=  { virtualPortDefEntry 53 }

virtualPortDefTraceTransmitSapiOduTcmC OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted SAPI part of the TCMC trace (15 character)" 
    ::=  { virtualPortDefEntry 54 }

virtualPortDefTraceTransmitDapiOduTcmC OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted DAPI part of the TCMC trace (15 character)" 
    ::=  { virtualPortDefEntry 55 }

virtualPortDefTraceTransmitOpspOduTcmC OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted Operator Specific part of the TCMC trace (32 character)" 
    ::=  { virtualPortDefEntry 56 }

virtualPortDefTimModeOduTcmC OBJECT-TYPE
    SYNTAX      TimMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Detection of TIM-TCMC Condition can be configured" 
    ::=  { virtualPortDefEntry 57 }

virtualPortDefTerminationLevel OBJECT-TYPE
    SYNTAX      OhTerminationLevel
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The entity is Addressable by Management [because its supporting entity is defined in the database and therefore its address existsSignal Tremination Level of Intrusive Access to Header Information.
         Not used in 7.0, monitoring is one layer higher than TERM level,
         if applicable. All conditions detected on monitoring layer will not
         be reported (severity degradated to NR)." 
    ::=  { virtualPortDefEntry 58 }

virtualPortDefLoopConfig OBJECT-TYPE
    SYNTAX      LoopConfig
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "External or Facility Loopback" 
    ::=  { virtualPortDefEntry 59 }

virtualPortDefVcType OBJECT-TYPE
    SYNTAX      VirtualContainerType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Virtual Container Group Type" 
    ::=  { virtualPortDefEntry 60 }

virtualPortDefCir OBJECT-TYPE
    SYNTAX      Unsigned32 
    UNITS       "Mbps"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "CIR (Committed Information Rate ) is used on Ethernet Interfaces with a policing function" 
    ::=  { virtualPortDefEntry 61 }

virtualPortDefOpuPayloadType OBJECT-TYPE
    SYNTAX      FspR7OpuPayloadType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "OPU Payload Type Indicator" 
    ::=  { virtualPortDefEntry 62 }

virtualPortDefOtnStuffing OBJECT-TYPE
    SYNTAX      FspR7Stuff
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates if bit/byte stuffing is used in the transport signal." 
    ::=  { virtualPortDefEntry 63 }

virtualPortDefRedLineState OBJECT-TYPE
    SYNTAX      FspR7RedLinedState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "will be set by higher level software to act as a barrier to deletion" 
    ::=  { virtualPortDefEntry 64 }

virtualPortDefTunnelAid OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Tunnel AID" 
    ::=  { virtualPortDefEntry 65 }

endOfVirtualPortDefTable OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { facilityMgmtDef 3 }

endOfFacilityMgmtDef OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { facilityMgmtDef 10000 }

linkDefTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF LinkDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "linkCapTable"
    ::=  { dcnMgmtDef 1 }

linkDefEntry OBJECT-TYPE
    SYNTAX      LinkDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "Entry of linkCapTable"
    INDEX       {
                  entityDcnShelfNo,
                  entityDcnSlotNo,
                  entityDcnPortNo,
                  entityDcnExtNo,
                  entityDcnClassName
                }
    ::=  { linkDefTable 1 }

LinkDefEntry ::=  SEQUENCE
  { linkDefRowStatus RowStatus,
    linkDefType FspR7InterfaceType,
    linkDefAdmin FspR7AdminState,
    linkDefAlias SnmpAdminString,
    linkDefAuthString SnmpAdminString,
    linkDefProxyArp FspR7NoYes,
    linkDefOspf FspR7OspfMode,
    linkDefBaud FspR7Baund,
    linkDefAuthType FspR7CpAuthType,
    linkDefIpType FspR7IpType,
    linkDefMetric Unsigned32,
    linkDefAreaAid SnmpAdminString,
    linkDefNearEndIp IpAddress,
    linkDefBitrate Unsigned32,
    linkDefIPv6Type FspR7IPv6Type,
    linkDefNendIPv6 SnmpAdminString }

linkDefRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "RowStatus object is used to create or delete a row in the table."
    ::=  { linkDefEntry 1 }

linkDefType OBJECT-TYPE
    SYNTAX      FspR7InterfaceType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload" 
    ::=  { linkDefEntry 2 }

linkDefAdmin OBJECT-TYPE
    SYNTAX      FspR7AdminState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Administrative State will be displayed in the GUI with full
         name values; it will be differently displayed in TL1 syntax according
         to TL1 display rules. The transaction into the UAS state requires
         a special destroy/delete function" 
    ::=  { linkDefEntry 3 }

linkDefAlias OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "User Applied Descriptor" 
    ::=  { linkDefEntry 4 }

linkDefAuthString OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "OSPF Authentication Key/String depending on Authentication Type" 
    ::=  { linkDefEntry 5 }

linkDefProxyArp OBJECT-TYPE
    SYNTAX      FspR7NoYes
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "If enabled then ARP requests for FENDIP (coming in on another interface in the same subnet as FENDIP) will be replied too." 
    ::=  { linkDefEntry 6 }

linkDefOspf OBJECT-TYPE
    SYNTAX      FspR7OspfMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "OSPF Routing (Dynamic)" 
    ::=  { linkDefEntry 7 }

linkDefBaud OBJECT-TYPE
    SYNTAX      FspR7Baund
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Baud rate of the serial interface" 
    ::=  { linkDefEntry 8 }

linkDefAuthType OBJECT-TYPE
    SYNTAX      FspR7CpAuthType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "OSPF Authentication Type" 
    ::=  { linkDefEntry 9 }

linkDefIpType OBJECT-TYPE
    SYNTAX      FspR7IpType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Type of IP configuration" 
    ::=  { linkDefEntry 10 }

linkDefMetric OBJECT-TYPE
    SYNTAX      Unsigned32 (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Routing Metric" 
    ::=  { linkDefEntry 11 }

linkDefAreaAid OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "OSPF Area AID" 
    ::=  { linkDefEntry 12 }

linkDefNearEndIp OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "IP Address assigned to PPP Termination Point on Near-End NE. Defaults to System IP address" 
    ::=  { linkDefEntry 13 }

linkDefBitrate OBJECT-TYPE
    SYNTAX      Unsigned32 (1..13702) 
    UNITS       "kbps"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Maximum provisioned bit rate for PPP/IP Link of transmitter for an ECC" 
    ::=  { linkDefEntry 14 }

linkDefIPv6Type OBJECT-TYPE
    SYNTAX      FspR7IPv6Type
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Type of IPv6 configuration" 
    ::=  { linkDefEntry 15 }

linkDefNendIPv6 OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "IPv6 Address assigned to PPP Termination Point on Near-End NE." 
    ::=  { linkDefEntry 16 }

endOfLinkDefTable OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { dcnMgmtDef 2 }

scDefTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ScDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "scCapTable"
    ::=  { dcnMgmtDef 3 }

scDefEntry OBJECT-TYPE
    SYNTAX      ScDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "Entry of scCapTable"
    INDEX       {
                  entityDcnShelfNo,
                  entityDcnSlotNo,
                  entityDcnPortNo,
                  entityDcnExtNo,
                  entityDcnClassName
                }
    ::=  { scDefTable 1 }

ScDefEntry ::=  SEQUENCE
  { scDefRowStatus RowStatus,
    scDefType FspR7InterfaceType,
    scDefAdmin FspR7AdminState,
    scDefAlias SnmpAdminString,
    scDefAuthString SnmpAdminString,
    scDefOspf FspR7OspfMode,
    scDefAuthType FspR7CpAuthType,
    scDefIpType FspR7IpType,
    scDefMetric Unsigned32,
    scDefAreaAid SnmpAdminString,
    scDefAlsMode FspR7AlsMode,
    scDefSigDegThresReceiver Unsigned32,
    scDefAutonegotiation EnableState,
    scDefBitrate FspR7Bitrate,
    scDefDuplex EthDuplexMode,
    scDefAttGradientTh Unsigned32,
    scDefIpAddr IpAddress,
    scDefLanAid SnmpAdminString,
    scDefIpMask IpAddress,
    scDefDataLayerPmReset FspR7PmReset,
    scDefPriority Unsigned32,
    scDefIPv6 SnmpAdminString,
    scDefIPv6PrefixLen Unsigned32,
    scDefIpMode FspR7IpMode,
    scDefGatewayProxyArp FspR7EnableDisable }

scDefRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "RowStatus object is used to create or delete a row in the table."
    ::=  { scDefEntry 1 }

scDefType OBJECT-TYPE
    SYNTAX      FspR7InterfaceType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload" 
    ::=  { scDefEntry 2 }

scDefAdmin OBJECT-TYPE
    SYNTAX      FspR7AdminState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Administrative State will be displayed in the GUI with full
         name values; it will be differently displayed in TL1 syntax according
         to TL1 display rules. The transaction into the UAS state requires
         a special destroy/delete function" 
    ::=  { scDefEntry 3 }

scDefAlias OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "User Applied Descriptor" 
    ::=  { scDefEntry 4 }

scDefAuthString OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "OSPF Authentication Key/String depending on Authentication Type" 
    ::=  { scDefEntry 5 }

scDefOspf OBJECT-TYPE
    SYNTAX      FspR7OspfMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "OSPF Routing (Dynamic)" 
    ::=  { scDefEntry 6 }

scDefAuthType OBJECT-TYPE
    SYNTAX      FspR7CpAuthType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "OSPF Authentication Type" 
    ::=  { scDefEntry 7 }

scDefIpType OBJECT-TYPE
    SYNTAX      FspR7IpType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Type of IP configuration" 
    ::=  { scDefEntry 8 }

scDefMetric OBJECT-TYPE
    SYNTAX      Unsigned32 (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Routing Metric" 
    ::=  { scDefEntry 9 }

scDefAreaAid OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "OSPF Area AID" 
    ::=  { scDefEntry 10 }

scDefAlsMode OBJECT-TYPE
    SYNTAX      FspR7AlsMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Determines the reaction in backward direction in response to a LOS
         on the same Interface: on a Network Interface connected to the DWDM
         this is a matter of laser safety" 
    ::=  { scDefEntry 11 }

scDefSigDegThresReceiver OBJECT-TYPE
    SYNTAX      Unsigned32 
    UNITS       "0.1 dB"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Signal Degrade Threshold on Receiver. Reported as ATTRMT-SDHT to far end." 
    ::=  { scDefEntry 12 }

scDefAutonegotiation OBJECT-TYPE
    SYNTAX      EnableState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Auto Negotiation for the data rate" 
    ::=  { scDefEntry 13 }

scDefBitrate OBJECT-TYPE
    SYNTAX      FspR7Bitrate
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Provisioned data rate" 
    ::=  { scDefEntry 14 }

scDefDuplex OBJECT-TYPE
    SYNTAX      EthDuplexMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Duplex Mode Provision." 
    ::=  { scDefEntry 15 }

scDefAttGradientTh OBJECT-TYPE
    SYNTAX      Unsigned32 (5..30) 
    UNITS       "0.1 dB/min"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Attenuation Gradient Threshold on Receive Fiber. Applies to both
         TRMT and RCV directions; but threshold violation is reported for
         each direction separately by the 'tapping' alarms: INTRUDE-RCV
         and INTRUDE-TRMT."
    ::=  { scDefEntry 16 }

scDefIpAddr OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "IP Address assigned to LAN IP Interface" 
    ::=  { scDefEntry 17 }

scDefLanAid OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "AID of LAN" 
    ::=  { scDefEntry 18 }

scDefIpMask OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "IP MASK assigned to LAN IP Interface" 
    ::=  { scDefEntry 19 }

scDefDataLayerPmReset OBJECT-TYPE
    SYNTAX      FspR7PmReset
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Reset data-layer Performance registers" 
    ::=  { scDefEntry 20 }

scDefPriority OBJECT-TYPE
    SYNTAX      Unsigned32 (0..255)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Priority" 
    ::=  { scDefEntry 21 }

scDefIPv6 OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "IPv6 Address" 
    ::=  { scDefEntry 22 }

scDefIPv6PrefixLen OBJECT-TYPE
    SYNTAX      Unsigned32 (0..128)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "IPv6 Subnet Prefix Length" 
    ::=  { scDefEntry 23 }

scDefIpMode OBJECT-TYPE
    SYNTAX      FspR7IpMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "IP Mode of Operation either IPv4 only or IPv4 and IPv6. When operation supports IPv6, it is used for addresses external to the network." 
    ::=  { scDefEntry 24 }

scDefGatewayProxyArp OBJECT-TYPE
    SYNTAX      FspR7EnableDisable
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Gateway works as an ARP proxy" 
    ::=  { scDefEntry 25 }

endOfScDefTable OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { dcnMgmtDef 4 }

lanDefTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF LanDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "lanCapTable"
    ::=  { dcnMgmtDef 5 }

lanDefEntry OBJECT-TYPE
    SYNTAX      LanDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "Entry of lanCapTable"
    INDEX       {
                  entityDcnShelfNo,
                  entityDcnSlotNo,
                  entityDcnPortNo,
                  entityDcnExtNo,
                  entityDcnClassName
                }
    ::=  { lanDefTable 1 }

LanDefEntry ::=  SEQUENCE
  { lanDefRowStatus RowStatus,
    lanDefType FspR7InterfaceType,
    lanDefAdmin FspR7AdminState,
    lanDefAlias SnmpAdminString,
    lanDefAuthString SnmpAdminString,
    lanDefOspf FspR7OspfMode,
    lanDefAuthType FspR7CpAuthType,
    lanDefIpType FspR7IpType,
    lanDefMetric Unsigned32,
    lanDefAreaAid SnmpAdminString,
    lanDefIpAddr IpAddress,
    lanDefIpMask IpAddress,
    lanDefPriority Unsigned32,
    lanDefIPv6 SnmpAdminString,
    lanDefIPv6PrefixLen Unsigned32,
    lanDefIpMode FspR7IpMode }

lanDefRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "RowStatus object is used to create or delete a row in the table."
    ::=  { lanDefEntry 1 }

lanDefType OBJECT-TYPE
    SYNTAX      FspR7InterfaceType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload" 
    ::=  { lanDefEntry 2 }

lanDefAdmin OBJECT-TYPE
    SYNTAX      FspR7AdminState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Administrative State will be displayed in the GUI with full
         name values; it will be differently displayed in TL1 syntax according
         to TL1 display rules. The transaction into the UAS state requires
         a special destroy/delete function" 
    ::=  { lanDefEntry 3 }

lanDefAlias OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "User Applied Descriptor" 
    ::=  { lanDefEntry 4 }

lanDefAuthString OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "OSPF Authentication Key/String depending on Authentication Type" 
    ::=  { lanDefEntry 5 }

lanDefOspf OBJECT-TYPE
    SYNTAX      FspR7OspfMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "OSPF Routing (Dynamic)" 
    ::=  { lanDefEntry 6 }

lanDefAuthType OBJECT-TYPE
    SYNTAX      FspR7CpAuthType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "OSPF Authentication Type" 
    ::=  { lanDefEntry 7 }

lanDefIpType OBJECT-TYPE
    SYNTAX      FspR7IpType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Type of IP configuration" 
    ::=  { lanDefEntry 8 }

lanDefMetric OBJECT-TYPE
    SYNTAX      Unsigned32 (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Routing Metric" 
    ::=  { lanDefEntry 9 }

lanDefAreaAid OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "OSPF Area AID" 
    ::=  { lanDefEntry 10 }

lanDefIpAddr OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "IP Address assigned to LAN IP Interface" 
    ::=  { lanDefEntry 11 }

lanDefIpMask OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "IP MASK assigned to LAN IP Interface" 
    ::=  { lanDefEntry 12 }

lanDefPriority OBJECT-TYPE
    SYNTAX      Unsigned32 (0..255)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Priority" 
    ::=  { lanDefEntry 13 }

lanDefIPv6 OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "IPv6 Address" 
    ::=  { lanDefEntry 14 }

lanDefIPv6PrefixLen OBJECT-TYPE
    SYNTAX      Unsigned32 (0..128)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "IPv6 Subnet Prefix Length" 
    ::=  { lanDefEntry 15 }

lanDefIpMode OBJECT-TYPE
    SYNTAX      FspR7IpMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "IP Mode of Operation either IPv4 only or IPv4 and IPv6. When operation supports IPv6, it is used for addresses external to the network." 
    ::=  { lanDefEntry 16 }

endOfLanDefTable OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { dcnMgmtDef 6 }

eccDefTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF EccDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "eccCapTable (Embedded Communication Channel)"
    ::=  { dcnMgmtDef 7 }

eccDefEntry OBJECT-TYPE
    SYNTAX      EccDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "Entry of eccCapTable"
    INDEX       {
                  entityDcnShelfNo,
                  entityDcnSlotNo,
                  entityDcnPortNo,
                  entityDcnExtNo,
                  entityDcnClassName
                }
    ::=  { eccDefTable 1 }

EccDefEntry ::=  SEQUENCE
  { eccDefRowStatus RowStatus,
    eccDefType FspR7InterfaceType,
    eccDefAdmin FspR7AdminState,
    eccDefAlias SnmpAdminString,
    eccDefLanAid SnmpAdminString,
    eccDefExternalVid Unsigned32 }

eccDefRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "RowStatus object is used to create or delete a row in the table."
    ::=  { eccDefEntry 1 }

eccDefType OBJECT-TYPE
    SYNTAX      FspR7InterfaceType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload" 
    ::=  { eccDefEntry 2 }

eccDefAdmin OBJECT-TYPE
    SYNTAX      FspR7AdminState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Administrative State will be displayed in the GUI with full
         name values; it will be differently displayed in TL1 syntax according
         to TL1 display rules. The transaction into the UAS state requires
         a special destroy/delete function" 
    ::=  { eccDefEntry 3 }

eccDefAlias OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "User Applied Descriptor" 
    ::=  { eccDefEntry 4 }

eccDefLanAid OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "AID of LAN" 
    ::=  { eccDefEntry 5 }

eccDefExternalVid OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4095)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "External VID" 
    ::=  { eccDefEntry 6 }

endOfEccDefTable OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { dcnMgmtDef 8 }

endOfDcnMgmtDef OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { dcnMgmtDef 10000 }

opticalMuxDefTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF OpticalMuxDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "opticalCapTable"
    ::=  { opticalMuxMgmtDef 1 }

opticalMuxDefEntry OBJECT-TYPE
    SYNTAX      OpticalMuxDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "Entry of opticalCapTable"
    INDEX       {
                  entityOpticalMuxShelfNo,
                  entityOpticalMuxSlotNo,
                  entityOpticalMuxPortNo,
                  entityOpticalMuxExtNo,
                  entityOpticalMuxClassName
                }
    ::=  { opticalMuxDefTable 1 }

OpticalMuxDefEntry ::=  SEQUENCE
  { opticalMuxDefRowStatus RowStatus,
    opticalMuxDefPumpPower Integer32,
    opticalMuxDefInhibitSwitchToWork FspR7YesNo,
    opticalMuxDefForceLaserOn FspR7LaserForcedOperation,
    opticalMuxDefAseTabCreation FspR7AseTabOpr,
    opticalMuxDefOpticalSetPoint Integer32,
    opticalMuxDefInitiateEqualization FspR7InitEqualization,
    opticalMuxDefTilt Integer32,
    opticalMuxDefOscOpticalSetpoint Integer32,
    opticalMuxDefOffset Integer32,
    opticalMuxDefSwitchCommand FspR7APSCommand,
    opticalMuxDefAlsMode FspR7AlsMode,
    opticalMuxDefType FspR7InterfaceType,
    opticalMuxDefAttenuationGradient Unsigned32,
    opticalMuxDefInhibitSwitchToProt FspR7YesNo,
    opticalMuxDefVariableGain Unsigned32,
    opticalMuxDefAdmin FspR7AdminState,
    opticalMuxDefTimePeriod FspR7OtdrPeriod,
    opticalMuxDefSigDegThresReceiver Unsigned32,
    opticalMuxDefAlias SnmpAdminString,
    opticalMuxDefDataLayerPmReset FspR7PmReset,
    opticalMuxDefGain FspR7Gain,
    opticalMuxDefEdfaPwrOut FspR7EdfaOutputPowerRating,
    opticalMuxDefVoaSetpoint Unsigned32,
    opticalMuxDefFiberBrand FspR7FiberBrand,
    opticalMuxDefTiltSet FspR7TiltSet,
    opticalMuxDefForceFwdAsePilotOn FspR7LaserForcedOperation,
    opticalMuxDefBandProvision FspR7OpticalBand,
    opticalMuxDefOffsetHigh Integer32,
    opticalMuxDefOffsetLow Integer32,
    opticalMuxDefOptUpdate FspR7OptUpdate }

opticalMuxDefRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "RowStatus object is used to create or delete a row in the table."
    ::=  { opticalMuxDefEntry 1 }

opticalMuxDefPumpPower OBJECT-TYPE
    SYNTAX      Integer32 (115..138) 
    UNITS       "0.2 dBm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Total raman pump power" 
    ::=  { opticalMuxDefEntry 2 }

opticalMuxDefInhibitSwitchToWork OBJECT-TYPE
    SYNTAX      FspR7YesNo
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Inhibit Switch to Working. Inhibition blocks a switchInhibit Switch to Protection facility. Inhibition blocksInhibit Switch to Working. Inhibition blocks a switch
         switch to the Protection facility (protection path).Inhibit Switch to Protection facility. Inhibition blocks
         switch to the Protection facility (protection path).
         to the Working facility (working path).
         to the Working facility (working path).
         Applicable only for the Working facility in ACT state.
         Applicable only for the Working facility in ACT state.
         Applicable for the Protection facility in ACT state.
         Applicable for the Protection facility in ACT state." 
    ::=  { opticalMuxDefEntry 3 }

opticalMuxDefForceLaserOn OBJECT-TYPE
    SYNTAX      FspR7LaserForcedOperation
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Laser Forced On" 
    ::=  { opticalMuxDefEntry 4 }

opticalMuxDefAseTabCreation OBJECT-TYPE
    SYNTAX      FspR7AseTabOpr
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "ASE Table creation in process" 
    ::=  { opticalMuxDefEntry 5 }

opticalMuxDefOpticalSetPoint OBJECT-TYPE
    SYNTAX      Integer32 (-250..50) 
    UNITS       "0.1 dBm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Sets the optical power for power equalization in ROADM or for channel power control in OPCM" 
    ::=  { opticalMuxDefEntry 6 }

opticalMuxDefInitiateEqualization OBJECT-TYPE
    SYNTAX      FspR7InitEqualization
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Initiate Equalization" 
    ::=  { opticalMuxDefEntry 7 }

opticalMuxDefTilt OBJECT-TYPE
    SYNTAX      Integer32 (-50..0) 
    UNITS       "0.1 dB"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Change of optical channel power in dB over the complete transmission band" 
    ::=  { opticalMuxDefEntry 8 }

opticalMuxDefOscOpticalSetpoint OBJECT-TYPE
    SYNTAX      Integer32 (-250..50) 
    UNITS       "0.1 dBm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Sets the OSC optical power" 
    ::=  { opticalMuxDefEntry 9 }

opticalMuxDefOffset OBJECT-TYPE
    SYNTAX      Integer32 (10..30) 
    UNITS       "0.1 dB"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Sets the offset for the mean optical power for power equalization in ROADM" 
    ::=  { opticalMuxDefEntry 10 }

opticalMuxDefSwitchCommand OBJECT-TYPE
    SYNTAX      FspR7APSCommand
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "The switch command action for this facility. A command resulting
         in a switch event will also cause a change of the facility secondary state
         and a corresponding condition. Addressed by this command is the active port,
         the port to switch away from. Since this is a manual switch command, it will
         not switch if other port suffers from a signalfailure or a signal degrade."
    ::=  { opticalMuxDefEntry 11 }

opticalMuxDefAlsMode OBJECT-TYPE
    SYNTAX      FspR7AlsMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Determines the reaction in backward direction in response to a LOS
         on the same Interface: on a Network Interface connected to the DWDM
         this is a matter of laser safety" 
    ::=  { opticalMuxDefEntry 12 }

opticalMuxDefType OBJECT-TYPE
    SYNTAX      FspR7InterfaceType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload" 
    ::=  { opticalMuxDefEntry 13 }

opticalMuxDefAttenuationGradient OBJECT-TYPE
    SYNTAX      Unsigned32 (5..30) 
    UNITS       "0.1 dB/min"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Attenuation Gradient Threshold on Receive Fiber. Applies to both TRMT and RCV directions; but threshold violation is reported for each direction separately by the 'tapping' alarms: INTRUDE-RCV and INTRUDE-TRMT." 
    ::=  { opticalMuxDefEntry 14 }

opticalMuxDefInhibitSwitchToProt OBJECT-TYPE
    SYNTAX      FspR7YesNo
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Inhibit Switch to Working. Inhibition blocks a switchInhibit Switch to Protection facility. Inhibition blocksInhibit Switch to Working. Inhibition blocks a switch" 
    ::=  { opticalMuxDefEntry 15 }

opticalMuxDefVariableGain OBJECT-TYPE
    SYNTAX      Unsigned32 (0..350) 
    UNITS       "0.1 dB"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Variable Gain of EDFA" 
    ::=  { opticalMuxDefEntry 16 }

opticalMuxDefAdmin OBJECT-TYPE
    SYNTAX      FspR7AdminState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Administrative State will be displayed in the GUI with full
         name values; it will be differently displayed in TL1 syntax according
         to TL1 display rules. The transaction into the UAS state requires
         a special destroy/delete function" 
    ::=  { opticalMuxDefEntry 17 }

opticalMuxDefTimePeriod OBJECT-TYPE
    SYNTAX      FspR7OtdrPeriod
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "NONE - OTDR measurement disabled otherwise the OTDR duration in minutes." 
    ::=  { opticalMuxDefEntry 18 }

opticalMuxDefSigDegThresReceiver OBJECT-TYPE
    SYNTAX      Unsigned32 
    UNITS       "0.1 dB"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Signal Degrade Threshold on Receiver. Reported as ATTRMT-SDHT to far end." 
    ::=  { opticalMuxDefEntry 19 }

opticalMuxDefAlias OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "User Applied Descriptor" 
    ::=  { opticalMuxDefEntry 20 }

opticalMuxDefDataLayerPmReset OBJECT-TYPE
    SYNTAX      FspR7PmReset
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Reset data-layer Performance registers" 
    ::=  { opticalMuxDefEntry 21 }

opticalMuxDefGain OBJECT-TYPE
    SYNTAX      FspR7Gain
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Gain" 
    ::=  { opticalMuxDefEntry 22 }

opticalMuxDefEdfaPwrOut OBJECT-TYPE
    SYNTAX      FspR7EdfaOutputPowerRating
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Optical Output Power Rating - Provision" 
    ::=  { opticalMuxDefEntry 23 }

opticalMuxDefVoaSetpoint OBJECT-TYPE
    SYNTAX      Unsigned32 (0..300) 
    UNITS       "0.1 dB"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Sets the optical attenuation of VOA" 
    ::=  { opticalMuxDefEntry 24 }

opticalMuxDefFiberBrand OBJECT-TYPE
    SYNTAX      FspR7FiberBrand
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Brand of fiber present in the fiber plant" 
    ::=  { opticalMuxDefEntry 25 }

opticalMuxDefTiltSet OBJECT-TYPE
    SYNTAX      FspR7TiltSet
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Tilt setting as discrete values versus a range" 
    ::=  { opticalMuxDefEntry 26 }

opticalMuxDefForceFwdAsePilotOn OBJECT-TYPE
    SYNTAX      FspR7LaserForcedOperation
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Force the BWD Raman pilot on to allow building of FWD Raman ASE Table" 
    ::=  { opticalMuxDefEntry 27 }

opticalMuxDefBandProvision OBJECT-TYPE
    SYNTAX      FspR7OpticalBand
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Band Provision. Reference to BAND__INVENTORY." 
    ::=  { opticalMuxDefEntry 28 }

opticalMuxDefOffsetHigh OBJECT-TYPE
    SYNTAX      Integer32 (-250..210) 
    UNITS       "0.1 dBm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Sets the high level offset for power equalization in CCM" 
    ::=  { opticalMuxDefEntry 29 }

opticalMuxDefOffsetLow OBJECT-TYPE
    SYNTAX      Integer32 (-250..210) 
    UNITS       "0.1 dBm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Sets the low level offset for power equalization in CCM" 
    ::=  { opticalMuxDefEntry 30 }

opticalMuxDefOptUpdate OBJECT-TYPE
    SYNTAX      FspR7OptUpdate
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This parameter is used to operate/trigger OPT PM update; it triggers the entity to update its current OPT PM value, which can be retrieved via GET function." 
    ::=  { opticalMuxDefEntry 31 }

endOfOpticalMuxDefTable OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { opticalMuxMgmtDef 2 }

endOfOpticalMuxMgmtDef OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { opticalMuxMgmtDef 10000 }

shelfConnDefTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ShelfConnDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "shelfConnCapTable"
    ::=  { shelfConnMgmtDef 1 }

shelfConnDefEntry OBJECT-TYPE
    SYNTAX      ShelfConnDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "Entry of shelfConnCapTable"
    INDEX       {
                  entityShelfConnShelfNo,
                  entityShelfConnSlotNo,
                  entityShelfConnPortNo,
                  entityShelfConnExtNo,
                  entityShelfConnClassName
                }
    ::=  { shelfConnDefTable 1 }

ShelfConnDefEntry ::=  SEQUENCE
  { shelfConnDefRowStatus RowStatus,
    shelfConnDefAdmin FspR7AdminState,
    shelfConnDefAlias SnmpAdminString,
    shelfConnDefFacilityType FspR7InterfaceType }

shelfConnDefRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "RowStatus object is used to create or delete a row in the table."
    ::=  { shelfConnDefEntry 1 }

shelfConnDefAdmin OBJECT-TYPE
    SYNTAX      FspR7AdminState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Administrative State will be displayed in the GUI with full
         name values; it will be differently displayed in TL1 syntax according
         to TL1 display rules. The transaction into the UAS state requires
         a special destroy/delete function" 
    ::=  { shelfConnDefEntry 2 }

shelfConnDefAlias OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "User Applied Descriptor" 
    ::=  { shelfConnDefEntry 3 }

shelfConnDefFacilityType OBJECT-TYPE
    SYNTAX      FspR7InterfaceType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload" 
    ::=  { shelfConnDefEntry 4 }

endOfShelfConnDefTable OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { shelfConnMgmtDef 2 }

endOfShelfConnMgmtDef OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { shelfConnMgmtDef 10000 }

envPortDefTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF EnvPortDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "envPortCapTable"
    ::=  { envMgmtDef 1 }

envPortDefEntry OBJECT-TYPE
    SYNTAX      EnvPortDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "Entry of envPortCapTable"
    INDEX       {
                  entityEqptShelfNo,
                  entityEqptSlotNo,
                  entityEqptPortNo,
                  entityEqptExtNo,
                  entityEqptClassName
                }
    ::=  { envPortDefTable 1 }

EnvPortDefEntry ::=  SEQUENCE
  { envPortDefRowStatus RowStatus,
    envPortDefTelemetry FspR7TelemetryOutput,
    envPortDefFacilityType FspR7InterfaceType,
    envPortDefTifAlarmType SnmpAdminString,
    envPortDefTifAlarmMessage SnmpAdminString,
    envPortDefInvertTifInputLogic FspR7InvertTelemetryInputLogic }

envPortDefRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "RowStatus object is used to create or delete a row in the table."
    ::=  { envPortDefEntry 1 }

envPortDefTelemetry OBJECT-TYPE
    SYNTAX      FspR7TelemetryOutput
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Telemetry interface output provision" 
    ::=  { envPortDefEntry 2 }

envPortDefFacilityType OBJECT-TYPE
    SYNTAX      FspR7InterfaceType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload" 
    ::=  { envPortDefEntry 3 }

envPortDefTifAlarmType OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Telemetry interface alarm type" 
    ::=  { envPortDefEntry 4 }

envPortDefTifAlarmMessage OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Telemetry interface alarm message" 
    ::=  { envPortDefEntry 5 }

envPortDefInvertTifInputLogic OBJECT-TYPE
    SYNTAX      FspR7InvertTelemetryInputLogic
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Invert telemetry interface input logic" 
    ::=  { envPortDefEntry 6 }

endOfEnvPortDefTable OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { envMgmtDef 2 }

endOfEnvMgmtDef OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { envMgmtDef 10000 }

containerDefTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ContainerDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "containerCapTable"
    ::=  { containerMgmtDef 1 }

containerDefEntry OBJECT-TYPE
    SYNTAX      ContainerDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "Entry of containerCapTable"
    INDEX       {
                  entityContainerShelfNo,
                  entityContainerSlotNo,
                  entityContainerPortNo,
                  entityContainerExtNo,
                  entityContainerClassName
                }
    ::=  { containerDefTable 1 }

ContainerDefEntry ::=  SEQUENCE
  { containerDefRowStatus RowStatus,
    containerDefFacilityType FspR7InterfaceType }

containerDefRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "RowStatus object is used to create or delete a row in the table."
    ::=  { containerDefEntry 1 }

containerDefFacilityType OBJECT-TYPE
    SYNTAX      FspR7InterfaceType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload" 
    ::=  { containerDefEntry 2 }

endOfContainerDefTable OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { containerMgmtDef 2 }

endOfContainerMgmtDef OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { containerMgmtDef 10000 }

opticalLineDefTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF OpticalLineDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "opticalLineCapTable"
    ::=  { opticalLineMgmtDef 1 }

opticalLineDefEntry OBJECT-TYPE
    SYNTAX      OpticalLineDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "Entry of opticalLineCapTable"
    INDEX       {
                  entityOptLineIndexNo1,
                  entityOptLineIndexNo1,
                  entityOptLineIndexNo1,
                  entityOptLineIndexNo1,
                  entityOptLineClassName
                }
    ::=  { opticalLineDefTable 1 }

OpticalLineDefEntry ::=  SEQUENCE
  { opticalLineDefRowStatus RowStatus,
    opticalLineDefTxLineAttenuation Integer32,
    opticalLineDefRxLineAttenuation Integer32,
    opticalLineDefAlias SnmpAdminString,
    opticalLineDefFarEndLocation SnmpAdminString }

opticalLineDefRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "RowStatus object is used to create or delete a row in the table."
    ::=  { opticalLineDefEntry 1 }

opticalLineDefTxLineAttenuation OBJECT-TYPE
    SYNTAX      Integer32 
    UNITS       "0.1 dB"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "The Attenuation (in 0.1 dB) on line connected to
         transmitter of this interface. If there is loss of signal
         then line attenuation is -65535. The value -255 will be
         returned if the value isn't available."
    ::=  { opticalLineDefEntry 2 }

opticalLineDefRxLineAttenuation OBJECT-TYPE
    SYNTAX      Integer32 
    UNITS       "0.1 dB"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "The Attenuation (in 0.1 dB) on line connected to receiver
         of this interface. If there is loss of signal then ine
         attenuation is -65535. The value -255 will be returned if
         the value isn't available."
    ::=  { opticalLineDefEntry 3 }

opticalLineDefAlias OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "User Applied Descriptor" 
    ::=  { opticalLineDefEntry 4 }

opticalLineDefFarEndLocation OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "FEND Location" 
    ::=  { opticalLineDefEntry 5 }

endOfOpticalLineDefTable OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { opticalLineMgmtDef 2 }

endOfOpticalLineMgmtDef OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { opticalLineMgmtDef 10000 }

optThresholdConfigDefTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF OptThresholdConfigDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "optThresholdConfigCapTable"
    ::=  { performanceFacilityThresholdDef 1 }

optThresholdConfigDefEntry OBJECT-TYPE
    SYNTAX      OptThresholdConfigDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "Entry of optThresholdConfigCapTable"
    INDEX       {
                  entityFacilityShelfNo,
                  entityFacilitySlotNo,
                  entityFacilityPortNo,
                  entityFacilityExtNo,
                  entityFacilityClassName
                }
    ::=  { optThresholdConfigDefTable 1 }

OptThresholdConfigDefEntry ::=  SEQUENCE
  { optThresholdConfigDefLowConfig Integer32,
    optThresholdConfigDefHighConfig Integer32 }

optThresholdConfigDefLowConfig OBJECT-TYPE
    SYNTAX      Integer32 (-500..300) 
    UNITS       "0.1 dBm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Configurable threshold of the Optical Power Transmitted (output)" 
    ::=  { optThresholdConfigDefEntry 1 }

optThresholdConfigDefHighConfig OBJECT-TYPE
    SYNTAX      Integer32 (-500..300) 
    UNITS       "0.1 dBm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Configurable high threshold of the Optical Power Transmitted (output)" 
    ::=  { optThresholdConfigDefEntry 2 }

oprThresholdConfigDefTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF OprThresholdConfigDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "oprThresholdConfigCapTable"
    ::=  { performanceFacilityThresholdDef 2 }

oprThresholdConfigDefEntry OBJECT-TYPE
    SYNTAX      OprThresholdConfigDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "Entry of oprThresholdConfigCapTable"
    INDEX       {
                  entityFacilityShelfNo,
                  entityFacilitySlotNo,
                  entityFacilityPortNo,
                  entityFacilityExtNo,
                  entityFacilityClassName
                }
    ::=  { oprThresholdConfigDefTable 1 }

OprThresholdConfigDefEntry ::=  SEQUENCE
  { oprThresholdConfigDefLowConfig Integer32,
    oprThresholdConfigDefHighConfig Integer32 }

oprThresholdConfigDefLowConfig OBJECT-TYPE
    SYNTAX      Integer32 (-450..260) 
    UNITS       "0.1 dBm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Optical Input Power Received" 
    ::=  { oprThresholdConfigDefEntry 1 }

oprThresholdConfigDefHighConfig OBJECT-TYPE
    SYNTAX      Integer32 (-450..260) 
    UNITS       "0.1 dBm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Optical Input Power Received" 
    ::=  { oprThresholdConfigDefEntry 2 }

endOfOprThresholdConfigDefTable OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { performanceFacilityThresholdDef 3 }

endOfPerformanceFacilityThresholdDef OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { performanceFacilityThresholdDef 10000 }

terminationPointDefTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF TerminationPointDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "terminationPointCapTable"
    ::=  { fiberMapDef 1 }

terminationPointDefEntry OBJECT-TYPE
    SYNTAX      TerminationPointDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "Entry of terminationPointCapTable"
    INDEX       {
                  entityTerminPointIndexNo1,
                  entityTerminPointIndexNo2,
                  entityTerminPointIndexNo3,
                  entityTerminPointIndexNo4,
                  entityTerminPointClassName
                }
    ::=  { terminationPointDefTable 1 }

TerminationPointDefEntry ::=  SEQUENCE
  { terminationPointDefRowStatus RowStatus,
    terminationPointDefAdmin FspR7AdminState,
    terminationPointDefFiberDetect FspR7FiberDetect,
    terminationPointDefAlias SnmpAdminString }

terminationPointDefRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Physical Termination Point Capability RowStatus."
    ::=  { terminationPointDefEntry 1 }

terminationPointDefAdmin OBJECT-TYPE
    SYNTAX      FspR7AdminState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Physical Termination Point Capability Adminstrative State."
    ::=  { terminationPointDefEntry 2 }

terminationPointDefFiberDetect OBJECT-TYPE
    SYNTAX      FspR7FiberDetect
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Physical Termination Point Capability Fiber Detect."
    ::=  { terminationPointDefEntry 3 }

terminationPointDefAlias OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Physical Termination Point Capabillity Alias."
    ::=  { terminationPointDefEntry 4 }

connectionDefTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ConnectionDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "connectionCapTable"
    ::=  { fiberMapDef 2 }

connectionDefEntry OBJECT-TYPE
    SYNTAX      ConnectionDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "Entry of connectionCapTable"
    INDEX       {
                  entityTerminPointIndexNo1,
                  entityTerminPointIndexNo2,
                  entityTerminPointIndexNo3,
                  entityTerminPointIndexNo4,
                  entityTerminPointClassName,
                  entityTerminPointIndexNo1,
                  entityTerminPointIndexNo2,
                  entityTerminPointIndexNo3,
                  entityTerminPointIndexNo4,
                  entityTerminPointClassName,
                  entityConnectionClassName
                }
    ::=  { connectionDefTable 1 }

ConnectionDefEntry ::=  SEQUENCE
  { connectionDefRowStatus FspR7RowStatus,
    connectionDefType FspR7TypeConnection }

connectionDefRowStatus OBJECT-TYPE
    SYNTAX      FspR7RowStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Physical Connection Default RowStatus."
    ::=  { connectionDefEntry 1 }

connectionDefType OBJECT-TYPE
    SYNTAX      FspR7TypeConnection
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Physical Connection Default Type."
    ::=  { connectionDefEntry 2 }

endOfConnectionDefTable OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { fiberMapDef 3 }

endOfFiberMapDef OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { fiberMapDef 10000 }

externalPortDefTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ExternalPortDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "externalPortDef"
    ::=  { eciDef 1 }

externalPortDefEntry OBJECT-TYPE
    SYNTAX      ExternalPortDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "Entry of externalPortDef"
    INDEX       {
                  entityExternalPortShelfNo,
                  entityExternalPortSlotNo,
                  entityExternalPortPortNo,
                  entityExternalPortExtNo,
                  entityExternalPortClassName
                }
    ::=  { externalPortDefTable 1 }

ExternalPortDefEntry ::=  SEQUENCE
  { externalPortDefRowStatus FspR7RowStatus,
    externalPortDefType FspR7InterfaceType,
    externalPortDefTransmitChannel FspR7ChannelIdentifier,
    externalPortDefChannelBandwith FspR7ChannelBandwidth,
    externalPortDefAlias SnmpAdminString,
    externalPortDefFarEndLocation SnmpAdminString,
    externalPortDefBitrate Unsigned32,
    externalPortDefFecType FspR7FecType,
    externalPortDefLineCoding FspR7LineCoding,
    externalPortDefFrameFormat FspR7FrameFormat,
    externalPortDefOpticalPowerTx Integer32,
    externalPortDefOsnrTransmit Unsigned32,
    externalPortDefPmdTransmit Unsigned32,
    externalPortDefChromDisperTx Integer32,
    externalPortDefMinOsnrRcv Unsigned32,
    externalPortDefMinOptPowerRcv Integer32,
    externalPortDefMaxOptPowerRcv Integer32,
    externalPortDefMaxPmdRcv Unsigned32,
    externalPortDefMinChromDisperRcv Integer32,
    externalPortDefMaxChromDisperRcv Integer32,
    externalPortDefMaxBitErrorRate FspR7MaxBitErrorRate,
    externalPortDefSourceProfile SnmpAdminString }

externalPortDefRowStatus OBJECT-TYPE
    SYNTAX      FspR7RowStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Physical Connection Default RowStatus."
    ::=  { externalPortDefEntry 1 }

externalPortDefType OBJECT-TYPE
    SYNTAX      FspR7InterfaceType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "."
    ::=  { externalPortDefEntry 2 }

externalPortDefTransmitChannel OBJECT-TYPE
    SYNTAX      FspR7ChannelIdentifier
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "."
    ::=  { externalPortDefEntry 3 }

externalPortDefChannelBandwith OBJECT-TYPE
    SYNTAX      FspR7ChannelBandwidth
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "."
    ::=  { externalPortDefEntry 4 }

externalPortDefAlias OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "."
    ::=  { externalPortDefEntry 5 }

externalPortDefFarEndLocation OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "."
    ::=  { externalPortDefEntry 6 }

externalPortDefBitrate OBJECT-TYPE
    SYNTAX      Unsigned32 
    UNITS       "Mbps"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "."
    ::=  { externalPortDefEntry 7 }

externalPortDefFecType OBJECT-TYPE
    SYNTAX      FspR7FecType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "."
    ::=  { externalPortDefEntry 8 }

externalPortDefLineCoding OBJECT-TYPE
    SYNTAX      FspR7LineCoding
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "."
    ::=  { externalPortDefEntry 9 }

externalPortDefFrameFormat OBJECT-TYPE
    SYNTAX      FspR7FrameFormat
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "."
    ::=  { externalPortDefEntry 10 }

externalPortDefOpticalPowerTx OBJECT-TYPE
    SYNTAX      Integer32 (-9900..600) 
    UNITS       "0.1 dBm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "."
    ::=  { externalPortDefEntry 11 }

externalPortDefOsnrTransmit OBJECT-TYPE
    SYNTAX      Unsigned32 (0..58) 
    UNITS       "dB"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "."
    ::=  { externalPortDefEntry 12 }

externalPortDefPmdTransmit OBJECT-TYPE
    SYNTAX      Unsigned32 (0..30) 
    UNITS       "ps"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "."
    ::=  { externalPortDefEntry 13 }

externalPortDefChromDisperTx OBJECT-TYPE
    SYNTAX      Integer32 (-60000..60000) 
    UNITS       "ps/nm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "."
    ::=  { externalPortDefEntry 14 }

externalPortDefMinOsnrRcv OBJECT-TYPE
    SYNTAX      Unsigned32 (10..58) 
    UNITS       "dB"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "."
    ::=  { externalPortDefEntry 15 }

externalPortDefMinOptPowerRcv OBJECT-TYPE
    SYNTAX      Integer32 (-2500..0) 
    UNITS       "0.1 dBm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "."
    ::=  { externalPortDefEntry 16 }

externalPortDefMaxOptPowerRcv OBJECT-TYPE
    SYNTAX      Integer32 (-1000..1000) 
    UNITS       "0.1 dBm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "."
    ::=  { externalPortDefEntry 17 }

externalPortDefMaxPmdRcv OBJECT-TYPE
    SYNTAX      Unsigned32 (0..30) 
    UNITS       "ps"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "."
    ::=  { externalPortDefEntry 18 }

externalPortDefMinChromDisperRcv OBJECT-TYPE
    SYNTAX      Integer32 (-60000..60000) 
    UNITS       "ps/nm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "."
    ::=  { externalPortDefEntry 19 }

externalPortDefMaxChromDisperRcv OBJECT-TYPE
    SYNTAX      Integer32 (-60000..60000) 
    UNITS       "ps/nm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "."
    ::=  { externalPortDefEntry 20 }

externalPortDefMaxBitErrorRate OBJECT-TYPE
    SYNTAX      FspR7MaxBitErrorRate
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "."
    ::=  { externalPortDefEntry 21 }

externalPortDefSourceProfile OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "."
    ::=  { externalPortDefEntry 22 }

endOfExternalPortDefTable OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { eciDef 2 }

endOfEciDef OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { eciDef 10000 }

changePhysicalPortServiceDefTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ChangePhysicalPortServiceDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   ""
    ::=  { changeServiceDef 1 }

changePhysicalPortServiceDefEntry OBJECT-TYPE
    SYNTAX      ChangePhysicalPortServiceDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   ""
    INDEX       {
                  entityFacilityShelfNo,
                  entityFacilitySlotNo,
                  entityFacilityPortNo,
                  entityFacilityExtNo,
                  entityFacilityClassName
                }
    ::=  { changePhysicalPortServiceDefTable 1 }

ChangePhysicalPortServiceDefEntry ::=  SEQUENCE
  { changePhysicalPortServiceDefRowStatus RowStatus,
    changePhysicalPortServiceDefType FspR7InterfaceType,
    changePhysicalPortServiceDefAdmin FspR7AdminState,
    changePhysicalPortServiceDefAlias SnmpAdminString,
    changePhysicalPortServiceDefAlsMode FspR7AlsMode,
    changePhysicalPortServiceDefBehaviour FspR7PortBehaviour,
    changePhysicalPortServiceDefDispersionSetting Integer32,
    changePhysicalPortServiceDefDispersionMode FspR7DispersionModes,
    changePhysicalPortServiceDefChannelProv FspR7ChannelIdentifier,
    changePhysicalPortServiceDefWdmRxChannel FspR7ChannelIdentifier,
    changePhysicalPortServiceDefCodeGain FspR7CodeGain,
    changePhysicalPortServiceDefXfpDecisionThres FspR7XfpDecisionThres,
    changePhysicalPortServiceDefDisparityCorrection EnableState,
    changePhysicalPortServiceDefEqlzAdmin FspR7EqlzAdminState,
    changePhysicalPortServiceDefErrorForwarding FspR7ErrorFwdMode,
    changePhysicalPortServiceDefFecType FspR7FecType,
    changePhysicalPortServiceDefFarEndCommunication FspR7YesNo,
    changePhysicalPortServiceDefFlowControl FspR7FlowControlMode,
    changePhysicalPortServiceDefLaneChannelSetting FspR7ChannelIdentifier,
    changePhysicalPortServiceDefLaserDelayTimer FspR7LaserDelayTimer,
    changePhysicalPortServiceDefLaserOffTimer Unsigned32,
    changePhysicalPortServiceDefLaserOnTimer Unsigned32,
    changePhysicalPortServiceDefLaserOffDelayFunction EnableState,
    changePhysicalPortServiceDefAutoPTassignment FspR7ManualAuto,
    changePhysicalPortServiceDefTributarySlotMethod FspR7ManualAuto,
    changePhysicalPortServiceDefOpticalSetPoint Integer32,
    changePhysicalPortServiceDefOpuPayloadType FspR7OpuPayloadType,
    changePhysicalPortServiceDefSigDegThresSonetLine FspR7BERThreshold,
    changePhysicalPortServiceDefSigDegThresSdhMs Unsigned32,
    changePhysicalPortServiceDefSigDegThresOtu Integer32,
    changePhysicalPortServiceDefSigDegThresOdu Integer32,
    changePhysicalPortServiceDefSigDegThreshold Unsigned32,
    changePhysicalPortServiceDefSigDegPcslThreshold Unsigned32,
    changePhysicalPortServiceDefSigDegThresSonetSection FspR7BERThresholdSection,
    changePhysicalPortServiceDefSigDegThresSdhSection Unsigned32,
    changePhysicalPortServiceDefSigDegThresOduTcmA Integer32,
    changePhysicalPortServiceDefSigDegThresOduTcmB Integer32,
    changePhysicalPortServiceDefSigDegThresOduTcmC Integer32,
    changePhysicalPortServiceDefSignalDegradePeriod Unsigned32,
    changePhysicalPortServiceDefSigDegPeriodOdu Unsigned32,
    changePhysicalPortServiceDefSigDegPeriodOtu Unsigned32,
    changePhysicalPortServiceDefSigDegPeriodIntegration Unsigned32,
    changePhysicalPortServiceDefSigDegPeriodSdhSection Unsigned32,
    changePhysicalPortServiceDefSigDegPeriodOduTcmA Unsigned32,
    changePhysicalPortServiceDefSigDegPeriodOduTcmB Unsigned32,
    changePhysicalPortServiceDefSigDegPeriodOduTcmC Unsigned32,
    changePhysicalPortServiceDefOtnStuffing FspR7Stuff,
    changePhysicalPortServiceDefTcmALevel OtnTcmLevel,
    changePhysicalPortServiceDefTcmBLevel OtnTcmLevel,
    changePhysicalPortServiceDefTcmCLevel OtnTcmLevel,
    changePhysicalPortServiceDefTerminationLevel OhTerminationLevel,
    changePhysicalPortServiceDefTimingSource SonetTimingSource,
    changePhysicalPortServiceDefTimModeOdu TimMode,
    changePhysicalPortServiceDefTimModeOtu TimMode,
    changePhysicalPortServiceDefTimModeSonetSection TimMode,
    changePhysicalPortServiceDefTimModeOduTcmA TimMode,
    changePhysicalPortServiceDefTimModeOduTcmB TimMode,
    changePhysicalPortServiceDefTimModeOduTcmC TimMode,
    changePhysicalPortServiceDefTraceFormSonetSection SonetTraceForm,
    changePhysicalPortServiceDefTraceExpectedSonetSection OCTET STRING,
    changePhysicalPortServiceDefTraceTransmitSonetSection OCTET STRING,
    changePhysicalPortServiceDefTraceExpectedOtu OCTET STRING,
    changePhysicalPortServiceDefTraceTransmitSapiOtu OCTET STRING,
    changePhysicalPortServiceDefTraceTransmitDapiOtu OCTET STRING,
    changePhysicalPortServiceDefTraceTransmitOpspOtu OCTET STRING,
    changePhysicalPortServiceDefTraceExpectedOdu OCTET STRING,
    changePhysicalPortServiceDefTraceTransmitSapiOdu OCTET STRING,
    changePhysicalPortServiceDefTraceTransmitDapiOdu OCTET STRING,
    changePhysicalPortServiceDefTraceTransmitOpspOdu OCTET STRING,
    changePhysicalPortServiceDefTraceExpectedOduTcmA OCTET STRING,
    changePhysicalPortServiceDefTraceTransmitSapiOduTcmA OCTET STRING,
    changePhysicalPortServiceDefTraceTransmitDapiOduTcmA OCTET STRING,
    changePhysicalPortServiceDefTraceTransmitOpspOduTcmA OCTET STRING,
    changePhysicalPortServiceDefTraceExpectedOduTcmB OCTET STRING,
    changePhysicalPortServiceDefTraceTransmitSapiOduTcmB OCTET STRING,
    changePhysicalPortServiceDefTraceTransmitDapiOduTcmB OCTET STRING,
    changePhysicalPortServiceDefTraceTransmitOpspOduTcmB OCTET STRING,
    changePhysicalPortServiceDefTraceExpectedOduTcmC OCTET STRING,
    changePhysicalPortServiceDefTraceTransmitSapiOduTcmC OCTET STRING,
    changePhysicalPortServiceDefTraceTransmitDapiOduTcmC OCTET STRING,
    changePhysicalPortServiceDefTraceTransmitOpspOduTcmC OCTET STRING,
    changePhysicalPortServiceDefTxOffDelay FspR7EnableDisable,
    changePhysicalPortServiceDefVoaMode FspR7VoaMode,
    changePhysicalPortServiceDefVoaSetpoint Unsigned32 }

changePhysicalPortServiceDefRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "RowStatus object is used to create or delete a row in the table."
    ::=  { changePhysicalPortServiceDefEntry 1 }

changePhysicalPortServiceDefType OBJECT-TYPE
    SYNTAX      FspR7InterfaceType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload" 
    ::=  { changePhysicalPortServiceDefEntry 2 }

changePhysicalPortServiceDefAdmin OBJECT-TYPE
    SYNTAX      FspR7AdminState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Administrative State will be displayed in the GUI with full
         name values; it will be differently displayed in TL1 syntax according
         to TL1 display rules. The transaction into the UAS state requires
         a special destroy/delete function" 
    ::=  { changePhysicalPortServiceDefEntry 3 }

changePhysicalPortServiceDefAlias OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "User Applied Descriptor" 
    ::=  { changePhysicalPortServiceDefEntry 4 }

changePhysicalPortServiceDefAlsMode OBJECT-TYPE
    SYNTAX      FspR7AlsMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Determines the reaction in backward direction in response to a LOS
         on the same Interface: on a Network Interface connected to the DWDM
         this is a matter of laser safety" 
    ::=  { changePhysicalPortServiceDefEntry 5 }

changePhysicalPortServiceDefBehaviour OBJECT-TYPE
    SYNTAX      FspR7PortBehaviour
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Behavior or Port usage based on configuration/usage in the system regardless of faceplate designation" 
    ::=  { changePhysicalPortServiceDefEntry 6 }

changePhysicalPortServiceDefDispersionSetting OBJECT-TYPE
    SYNTAX      Integer32 (-50000..50000) 
    UNITS       "ps/nm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Chromatic Dispersion Compensation setting on module" 
    ::=  { changePhysicalPortServiceDefEntry 7 }

changePhysicalPortServiceDefDispersionMode OBJECT-TYPE
    SYNTAX      FspR7DispersionModes
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Chromatic Dispersion Compensation Mode" 
    ::=  { changePhysicalPortServiceDefEntry 8 }

changePhysicalPortServiceDefChannelProv OBJECT-TYPE
    SYNTAX      FspR7ChannelIdentifier
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Channel" 
    ::=  { changePhysicalPortServiceDefEntry 9 }

changePhysicalPortServiceDefWdmRxChannel OBJECT-TYPE
    SYNTAX      FspR7ChannelIdentifier
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Configuration of Rx optical channel" 
    ::=  { changePhysicalPortServiceDefEntry 10 }

changePhysicalPortServiceDefCodeGain OBJECT-TYPE
    SYNTAX      FspR7CodeGain
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Forward Error Correction Coding gain" 
    ::=  { changePhysicalPortServiceDefEntry 11 }

changePhysicalPortServiceDefXfpDecisionThres OBJECT-TYPE
    SYNTAX      FspR7XfpDecisionThres
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "XFP Decision threshold setting" 
    ::=  { changePhysicalPortServiceDefEntry 12 }

changePhysicalPortServiceDefDisparityCorrection OBJECT-TYPE
    SYNTAX      EnableState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Disparity correction" 
    ::=  { changePhysicalPortServiceDefEntry 13 }

changePhysicalPortServiceDefEqlzAdmin OBJECT-TYPE
    SYNTAX      FspR7EqlzAdminState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Scheduled Equalization Administration" 
    ::=  { changePhysicalPortServiceDefEntry 14 }

changePhysicalPortServiceDefErrorForwarding OBJECT-TYPE
    SYNTAX      FspR7ErrorFwdMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Determines the reaction in forward direction in response to a LOS on
         the interface on the opposite side of the module: may override
         this behaviour in the interests of laser safety." 
    ::=  { changePhysicalPortServiceDefEntry 15 }

changePhysicalPortServiceDefFecType OBJECT-TYPE
    SYNTAX      FspR7FecType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Forward Error Correction (Only relevant where TYPE = OTU#)" 
    ::=  { changePhysicalPortServiceDefEntry 16 }

changePhysicalPortServiceDefFarEndCommunication OBJECT-TYPE
    SYNTAX      FspR7YesNo
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Used for Optojack plugs; Communication to Far End Plug is observed" 
    ::=  { changePhysicalPortServiceDefEntry 17 }

changePhysicalPortServiceDefFlowControl OBJECT-TYPE
    SYNTAX      FspR7FlowControlMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Flow Control mechanism" 
    ::=  { changePhysicalPortServiceDefEntry 18 }

changePhysicalPortServiceDefLaneChannelSetting OBJECT-TYPE
    SYNTAX      FspR7ChannelIdentifier
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lane Channel Setting" 
    ::=  { changePhysicalPortServiceDefEntry 19 }

changePhysicalPortServiceDefLaserDelayTimer OBJECT-TYPE
    SYNTAX      FspR7LaserDelayTimer
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Relevant only when ERRFWD=LSROFF. Enables/disables the
         possibility to delay turning off and on the laser.
         This applies to the case when turning off the laser
         is done as an error forwarding mechanism." 
    ::=  { changePhysicalPortServiceDefEntry 20 }

changePhysicalPortServiceDefLaserOffTimer OBJECT-TYPE
    SYNTAX      Unsigned32 (1..1000) 
    UNITS       "ms"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Delay before laser is swiched off" 
    ::=  { changePhysicalPortServiceDefEntry 21 }

changePhysicalPortServiceDefLaserOnTimer OBJECT-TYPE
    SYNTAX      Unsigned32 (1..1000) 
    UNITS       "ms"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Delay before laser is switched on" 
    ::=  { changePhysicalPortServiceDefEntry 22 }

changePhysicalPortServiceDefLaserOffDelayFunction OBJECT-TYPE
    SYNTAX      EnableState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "A configuration request for the Laser Off Delay function. This function
         delays turning off the laser as a consequent action to a defect."
    ::=  { changePhysicalPortServiceDefEntry 23 }

changePhysicalPortServiceDefAutoPTassignment OBJECT-TYPE
    SYNTAX      FspR7ManualAuto
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Auto assignment of ODU PT" 
    ::=  { changePhysicalPortServiceDefEntry 24 }

changePhysicalPortServiceDefTributarySlotMethod OBJECT-TYPE
    SYNTAX      FspR7ManualAuto
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Tributary Slot assignment method" 
    ::=  { changePhysicalPortServiceDefEntry 25 }

changePhysicalPortServiceDefOpticalSetPoint OBJECT-TYPE
    SYNTAX      Integer32 (-250..50) 
    UNITS       "0.1 dBm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Sets the optical power for power equalization in ROADM or for channel power control in OPCM" 
    ::=  { changePhysicalPortServiceDefEntry 26 }

changePhysicalPortServiceDefOpuPayloadType OBJECT-TYPE
    SYNTAX      FspR7OpuPayloadType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "OPU Payload Type Indicator" 
    ::=  { changePhysicalPortServiceDefEntry 27 }

changePhysicalPortServiceDefSigDegThresSonetLine OBJECT-TYPE
    SYNTAX      FspR7BERThreshold
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Bit-Error-Based Degradation Definition for SONET (standard integration period)" 
    ::=  { changePhysicalPortServiceDefEntry 28 }

changePhysicalPortServiceDefSigDegThresSdhMs OBJECT-TYPE
    SYNTAX      Unsigned32 (1..100) 
    UNITS       "%"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Block-Error-Based Degradation Definition for SDH (standard integration period).
         Defined as percentage Background Block Errors (30% default) evaluated
         over a defined period (SDPER-RS)." 
    ::=  { changePhysicalPortServiceDefEntry 29 }

changePhysicalPortServiceDefSigDegThresOtu OBJECT-TYPE
    SYNTAX      Integer32 (1..100) 
    UNITS       "%"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Background-Block-Error-Based Signal Degradation Definition for OTU" 
    ::=  { changePhysicalPortServiceDefEntry 30 }

changePhysicalPortServiceDefSigDegThresOdu OBJECT-TYPE
    SYNTAX      Integer32 (1..100) 
    UNITS       "%"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Background-Block-Error-Based Signal Degradation Definition for ODU" 
    ::=  { changePhysicalPortServiceDefEntry 31 }

changePhysicalPortServiceDefSigDegThreshold OBJECT-TYPE
    SYNTAX      Unsigned32 (1..10000)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Threshold for number of errors (CV or CV+DE) in one second" 
    ::=  { changePhysicalPortServiceDefEntry 32 }

changePhysicalPortServiceDefSigDegPcslThreshold OBJECT-TYPE
    SYNTAX      Unsigned32 (1..100) 
    UNITS       "%"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Block-Error-Based Degradation Definition for Physical Coding Sublayer" 
    ::=  { changePhysicalPortServiceDefEntry 33 }

changePhysicalPortServiceDefSigDegThresSonetSection OBJECT-TYPE
    SYNTAX      FspR7BERThresholdSection
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Bit-Error-Based Degradation Definition for SONET (standard integration period)" 
    ::=  { changePhysicalPortServiceDefEntry 34 }

changePhysicalPortServiceDefSigDegThresSdhSection OBJECT-TYPE
    SYNTAX      Unsigned32 (1..100) 
    UNITS       "%"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Block-Error-Based Degradation Definition for SDH (standard integration period).
         Defined as percentage Background Block Errors (30% default) evaluated
         over a defined period (SDPER-RS)." 
    ::=  { changePhysicalPortServiceDefEntry 35 }

changePhysicalPortServiceDefSigDegThresOduTcmA OBJECT-TYPE
    SYNTAX      Integer32 (1..100) 
    UNITS       "%"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Background-Block-Error-Based Signal Degradation Definition for TCM-A" 
    ::=  { changePhysicalPortServiceDefEntry 36 }

changePhysicalPortServiceDefSigDegThresOduTcmB OBJECT-TYPE
    SYNTAX      Integer32 (1..100) 
    UNITS       "%"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Background-Block-Error-Based Signal Degradation Definition for TCM-B" 
    ::=  { changePhysicalPortServiceDefEntry 37 }

changePhysicalPortServiceDefSigDegThresOduTcmC OBJECT-TYPE
    SYNTAX      Integer32 (1..100) 
    UNITS       "%"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Background-Block-Error-Based Signal Degradation Definition for TCM-C" 
    ::=  { changePhysicalPortServiceDefEntry 38 }

changePhysicalPortServiceDefSignalDegradePeriod OBJECT-TYPE
    SYNTAX      Unsigned32 (2..10) 
    UNITS       "s"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "The measurement period in seconds used together with
         the deployProvIfSigDegThresSdhRegSect based on the block error counting method.
         The valid range is 2..10,
         The default being 7."
    ::=  { changePhysicalPortServiceDefEntry 39 }

changePhysicalPortServiceDefSigDegPeriodOdu OBJECT-TYPE
    SYNTAX      Unsigned32 (2..10) 
    UNITS       "s"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Integration Period for Signal degrade" 
    ::=  { changePhysicalPortServiceDefEntry 40 }

changePhysicalPortServiceDefSigDegPeriodOtu OBJECT-TYPE
    SYNTAX      Unsigned32 (2..10) 
    UNITS       "s"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Integration Period for Signal degrade" 
    ::=  { changePhysicalPortServiceDefEntry 41 }

changePhysicalPortServiceDefSigDegPeriodIntegration OBJECT-TYPE
    SYNTAX      Unsigned32 (1..10) 
    UNITS       "s"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Integration Period for Signal degrade" 
    ::=  { changePhysicalPortServiceDefEntry 42 }

changePhysicalPortServiceDefSigDegPeriodSdhSection OBJECT-TYPE
    SYNTAX      Unsigned32 (2..10) 
    UNITS       "s"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Provisionable Signal Degrade Integration Period for SDH" 
    ::=  { changePhysicalPortServiceDefEntry 43 }

changePhysicalPortServiceDefSigDegPeriodOduTcmA OBJECT-TYPE
    SYNTAX      Unsigned32 (2..10) 
    UNITS       "s"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Integration Period for Signal degrade" 
    ::=  { changePhysicalPortServiceDefEntry 44 }

changePhysicalPortServiceDefSigDegPeriodOduTcmB OBJECT-TYPE
    SYNTAX      Unsigned32 (2..10) 
    UNITS       "s"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Integration Period of TCMB Signal Segrade" 
    ::=  { changePhysicalPortServiceDefEntry 45 }

changePhysicalPortServiceDefSigDegPeriodOduTcmC OBJECT-TYPE
    SYNTAX      Unsigned32 (2..10) 
    UNITS       "s"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Integration Period of TCMC Signal Segrade" 
    ::=  { changePhysicalPortServiceDefEntry 46 }

changePhysicalPortServiceDefOtnStuffing OBJECT-TYPE
    SYNTAX      FspR7Stuff
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates if bit/byte stuffing is used in the transport signal." 
    ::=  { changePhysicalPortServiceDefEntry 47 }

changePhysicalPortServiceDefTcmALevel OBJECT-TYPE
    SYNTAX      OtnTcmLevel
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Activation of Tandem Connection Monitoring Instance A" 
    ::=  { changePhysicalPortServiceDefEntry 48 }

changePhysicalPortServiceDefTcmBLevel OBJECT-TYPE
    SYNTAX      OtnTcmLevel
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Activation of Tandem Connection Monitoring Instance B" 
    ::=  { changePhysicalPortServiceDefEntry 49 }

changePhysicalPortServiceDefTcmCLevel OBJECT-TYPE
    SYNTAX      OtnTcmLevel
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Activation of Tandem Connection Monitoring Instance C" 
    ::=  { changePhysicalPortServiceDefEntry 50 }

changePhysicalPortServiceDefTerminationLevel OBJECT-TYPE
    SYNTAX      OhTerminationLevel
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The entity is Addressable by Management [because its supporting entity is defined in the database and therefore its address existsSignal Tremination Level of Intrusive Access to Header Information.
         Not used in 7.0, monitoring is one layer higher than TERM level,
         if applicable. All conditions detected on monitoring layer will not
         be reported (severity degradated to NR)." 
    ::=  { changePhysicalPortServiceDefEntry 51 }

changePhysicalPortServiceDefTimingSource OBJECT-TYPE
    SYNTAX      SonetTimingSource
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "The timing source for this interface.
         - internal: used in stand-alone, point-to-point topologies stand-alone (dedicated fiber operation).
         - loopTiming: e.g. used in point-to-point via SONET network and feeder topologies. The default is
         internal(1)."
    ::=  { changePhysicalPortServiceDefEntry 52 }

changePhysicalPortServiceDefTimModeOdu OBJECT-TYPE
    SYNTAX      TimMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Detection of TIM-ODU Condition can be configured" 
    ::=  { changePhysicalPortServiceDefEntry 53 }

changePhysicalPortServiceDefTimModeOtu OBJECT-TYPE
    SYNTAX      TimMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Detection of TIM-OTU Condition can be configured" 
    ::=  { changePhysicalPortServiceDefEntry 54 }

changePhysicalPortServiceDefTimModeSonetSection OBJECT-TYPE
    SYNTAX      TimMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Detection of TIM Sonet Section Condition can be configured" 
    ::=  { changePhysicalPortServiceDefEntry 55 }

changePhysicalPortServiceDefTimModeOduTcmA OBJECT-TYPE
    SYNTAX      TimMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Detection of TIM-TCMA Condition can be configured" 
    ::=  { changePhysicalPortServiceDefEntry 56 }

changePhysicalPortServiceDefTimModeOduTcmB OBJECT-TYPE
    SYNTAX      TimMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Detection of TIM-TCMB Condition can be configured" 
    ::=  { changePhysicalPortServiceDefEntry 57 }

changePhysicalPortServiceDefTimModeOduTcmC OBJECT-TYPE
    SYNTAX      TimMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Detection of TIM-TCMC Condition can be configured" 
    ::=  { changePhysicalPortServiceDefEntry 58 }

changePhysicalPortServiceDefTraceFormSonetSection OBJECT-TYPE
    SYNTAX      SonetTraceForm
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Byte-Length of Trace Compared to Expected" 
    ::=  { changePhysicalPortServiceDefEntry 59 }

changePhysicalPortServiceDefTraceExpectedSonetSection OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..62))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Expected Sec/RS trace. NULL TRACE implies that no trace comparison is made." 
    ::=  { changePhysicalPortServiceDefEntry 60 }

changePhysicalPortServiceDefTraceTransmitSonetSection OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..62))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Sec/RS Trace to be Transmitted" 
    ::=  { changePhysicalPortServiceDefEntry 61 }

changePhysicalPortServiceDefTraceExpectedOtu OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Expected SAPI part of the OTU trace (15 character). NULL TRACE implies that no trace comparison is made." 
    ::=  { changePhysicalPortServiceDefEntry 62 }

changePhysicalPortServiceDefTraceTransmitSapiOtu OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted SAPI part of the OTU trace (15 character)" 
    ::=  { changePhysicalPortServiceDefEntry 63 }

changePhysicalPortServiceDefTraceTransmitDapiOtu OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted DAPI part of the OTU trace (15 character)" 
    ::=  { changePhysicalPortServiceDefEntry 64 }

changePhysicalPortServiceDefTraceTransmitOpspOtu OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted Operator Specific part of the OTU trace (32 character)" 
    ::=  { changePhysicalPortServiceDefEntry 65 }

changePhysicalPortServiceDefTraceExpectedOdu OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Expected SAPI part of the ODU trace (15 character). NULL TRACE implies that no trace comparison is made." 
    ::=  { changePhysicalPortServiceDefEntry 66 }

changePhysicalPortServiceDefTraceTransmitSapiOdu OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted SAPI part of the ODU trace (15 character)" 
    ::=  { changePhysicalPortServiceDefEntry 67 }

changePhysicalPortServiceDefTraceTransmitDapiOdu OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted DAPI part of the ODU trace (15 character)" 
    ::=  { changePhysicalPortServiceDefEntry 68 }

changePhysicalPortServiceDefTraceTransmitOpspOdu OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted Operator Specific part of the ODU trace (32 character)" 
    ::=  { changePhysicalPortServiceDefEntry 69 }

changePhysicalPortServiceDefTraceExpectedOduTcmA OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Expected SAPI part of the TCMA trace (15 character). NULL TRACE-TCM implies that no trace comparison is made." 
    ::=  { changePhysicalPortServiceDefEntry 70 }

changePhysicalPortServiceDefTraceTransmitSapiOduTcmA OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted SAPI part of the TCMA trace (15 character)" 
    ::=  { changePhysicalPortServiceDefEntry 71 }

changePhysicalPortServiceDefTraceTransmitDapiOduTcmA OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted DAPI part of the TCMA trace (15 character)" 
    ::=  { changePhysicalPortServiceDefEntry 72 }

changePhysicalPortServiceDefTraceTransmitOpspOduTcmA OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted Operator Specific part of the TCMA trace (32 character)" 
    ::=  { changePhysicalPortServiceDefEntry 73 }

changePhysicalPortServiceDefTraceExpectedOduTcmB OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Expected SAPI part of the TCMB trace (15 character). NULL TRACE-TCM implies that no trace comparison is made." 
    ::=  { changePhysicalPortServiceDefEntry 74 }

changePhysicalPortServiceDefTraceTransmitSapiOduTcmB OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted SAPI part of the TCMB trace (15 character)" 
    ::=  { changePhysicalPortServiceDefEntry 75 }

changePhysicalPortServiceDefTraceTransmitDapiOduTcmB OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted DAPI part of the TCMB trace (15 character)" 
    ::=  { changePhysicalPortServiceDefEntry 76 }

changePhysicalPortServiceDefTraceTransmitOpspOduTcmB OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted Operator Specific part of the TCMB trace (32 character)" 
    ::=  { changePhysicalPortServiceDefEntry 77 }

changePhysicalPortServiceDefTraceExpectedOduTcmC OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Expected SAPI part of the TCMC trace (15 character). NULL TRACE-TCM implies that no trace comparison is made." 
    ::=  { changePhysicalPortServiceDefEntry 78 }

changePhysicalPortServiceDefTraceTransmitSapiOduTcmC OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted SAPI part of the TCMC trace (15 character)" 
    ::=  { changePhysicalPortServiceDefEntry 79 }

changePhysicalPortServiceDefTraceTransmitDapiOduTcmC OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted DAPI part of the TCMC trace (15 character)" 
    ::=  { changePhysicalPortServiceDefEntry 80 }

changePhysicalPortServiceDefTraceTransmitOpspOduTcmC OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The transmitted Operator Specific part of the TCMC trace (32 character)" 
    ::=  { changePhysicalPortServiceDefEntry 81 }

changePhysicalPortServiceDefTxOffDelay OBJECT-TYPE
    SYNTAX      FspR7EnableDisable
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Enable or disable TXOFFHOLD Period for Error Forwarding and LKDO-OFF Consequent Action." 
    ::=  { changePhysicalPortServiceDefEntry 82 }

changePhysicalPortServiceDefVoaMode OBJECT-TYPE
    SYNTAX      FspR7VoaMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "VOA operating mode" 
    ::=  { changePhysicalPortServiceDefEntry 83 }

changePhysicalPortServiceDefVoaSetpoint OBJECT-TYPE
    SYNTAX      Unsigned32 (0..300) 
    UNITS       "0.1 dB"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Sets the optical attenuation of VOA" 
    ::=  { changePhysicalPortServiceDefEntry 84 }

endOfChangePhysicalPortServiceDefTable OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { changeServiceDef 2 }

endOfChangeServiceDef OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { changeServiceDef 10000 }

ffpDefTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF FfpDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "FfpDefTable"
    ::=  { protectionDef 2 }

ffpDefEntry OBJECT-TYPE
    SYNTAX      FfpDefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   "Entry of FfpDefTable"
    INDEX       {
                  entityFfpShelfNo,
                  entityFfpSlotNo,
                  entityFfpPortNo,
                  entityFfpExtNo,
                  entityFfpClassName
                }
    ::=  { ffpDefTable 1 }

FfpDefEntry ::=  SEQUENCE
  { ffpDefRowStatus RowStatus,
    ffpDefCreationMethod FfpType,
    ffpDefSDswitching EnableState,
    ffpDefHoldOffTime ApsHoldoffTime,
    ffpDefProtectionMech ProtectionMech,
    ffpDefWorkingAid SnmpAdminString,
    ffpDefProtectionAid SnmpAdminString,
    ffpDefSignalDegradeSwitching EnableState,
    ffpDefSignalFailureSwitching EnableState,
    ffpDefFarEndIp IpAddress,
    ffpDefPeerAid SnmpAdminString,
    ffpDefApsType ApsType,
    ffpDefRevertMode ApsRevertMode,
    ffpDefWaitToRestore Unsigned32,
    ffpDefDirection ApsDirection,
    ffpDefProtectionType FspR7ProtectionType }

ffpDefRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "RowStatus"
    ::=  { ffpDefEntry 1 }

ffpDefCreationMethod OBJECT-TYPE
    SYNTAX      FfpType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Type of protection (normal/forced)"
    ::=  { ffpDefEntry 2 }

ffpDefSDswitching OBJECT-TYPE
    SYNTAX      EnableState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "This state controls whether the switch criteria for the APS group will
         include the Signal Degrade alarm."
    ::=  { ffpDefEntry 3 }

ffpDefHoldOffTime OBJECT-TYPE
    SYNTAX      ApsHoldoffTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "This value controls the switch delay (0 to 10 seconds in
         100ms steps) for the protection group. Changing the hold-off
         time when the timer is active will not affect the active
         timer. The change will take effect the next time the timer
         is active."
    ::=  { ffpDefEntry 4 }

ffpDefProtectionMech OBJECT-TYPE
    SYNTAX      ProtectionMech
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "The protection type of this protection group."
    ::=  { ffpDefEntry 5 }

ffpDefWorkingAid OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "AID of working port involved in the protection group." 
    ::=  { ffpDefEntry 6 }

ffpDefProtectionAid OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "(Protection AID) AID of protection entity involved in the protection group." 
    ::=  { ffpDefEntry 7 }

ffpDefSignalDegradeSwitching OBJECT-TYPE
    SYNTAX      EnableState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Switch Trigger Additionally on Signal Degrade Link Detection" 
    ::=  { ffpDefEntry 8 }

ffpDefSignalFailureSwitching OBJECT-TYPE
    SYNTAX      EnableState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Switch Trigger on Signal Failure Link Detection" 
    ::=  { ffpDefEntry 9 }

ffpDefFarEndIp OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "IP Address assigned to PPP Termination Point on Far-End NE. Default
         is set by NE System on LINK establishment if FENDIPACPT = Y"
    ::=  { ffpDefEntry 10 }

ffpDefPeerAid OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "AID of Protection Partner involved in the protection group." 
    ::=  { ffpDefEntry 11 }

ffpDefApsType OBJECT-TYPE
    SYNTAX      ApsType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "The type of APS implemented in this protection group."
    ::=  { ffpDefEntry 12 }

ffpDefRevertMode OBJECT-TYPE
    SYNTAX      ApsRevertMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Revertive Protection Switching" 
    ::=  { ffpDefEntry 13 }

ffpDefWaitToRestore OBJECT-TYPE
    SYNTAX      Unsigned32 (5..12) 
    UNITS       "min"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Wait to Restore Timer value" 
    ::=  { ffpDefEntry 14 }

ffpDefDirection OBJECT-TYPE
    SYNTAX      ApsDirection
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION   "Indicates whether the APS function is 'unidirectional' (single-ended)
         or 'bidirectional' (dual-ended)."
    ::=  { ffpDefEntry 15 }

ffpDefProtectionType OBJECT-TYPE
    SYNTAX      FspR7ProtectionType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "" 
    ::=  { ffpDefEntry 16 }

endOfFfpDefTable OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { protectionDef 3 }

endOfProtectionDef OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        ""
    ::=  { protectionDef 10000 }


-- conformance information

conformanceDef OBJECT IDENTIFIER ::= { advaFspR7Def 10 }

compliancesDef OBJECT IDENTIFIER ::= { conformanceDef 1 }

groupsDef      OBJECT IDENTIFIER ::= { conformanceDef 2 }

-- compliance statements

complianceDef MODULE-COMPLIANCE
  STATUS  current
  DESCRIPTION
    "The compliance statement for entities implementing the ADVA FSPR7 DEF MIB."
  MODULE  -- this module
  MANDATORY-GROUPS { objectGroupDef }
  ::= { compliancesDef 1 }


-- units of conformance

objectGroupDef OBJECT-GROUP
  OBJECTS {
    crossConnectionDefRowStatus,
    crossConnectionDefAdmin,
    crossConnectionDefRedLineState,
    crossConnectionDefConn,
    crossConnectionDefAlias,
    crossConnectionDefPathNode,
    crossConnectionDefTunnelAid,
    crossOpticalLineDefRowStatus,
    crossOpticalLineDefRedLineState,
    crossOpticalLineDefConn,
    crossOpticalLineDefCrsType,
    crossOpticalLineDefAlias,
    crossOpticalLineDefTunnelAid,
    crossConnectionDefType,
    physicalPortDefRowStatus,
    physicalPortDefType,
    physicalPortDefAdmin,
    virtualPortDefRowStatus,
    virtualPortDefChannelBand,
    virtualPortDefType,
    virtualPortDefAlias,
    virtualPortDefAdmin,
    virtualPortDefEqlzAdmin,
    connectionDefRowStatus,
    connectionDefType,
    externalPortDefRowStatus,
    externalPortDefType,
    externalPortDefTransmitChannel,
    externalPortDefChannelBandwith,
    externalPortDefAlias,
    externalPortDefFarEndLocation,
    externalPortDefBitrate,
    externalPortDefMaxChromDisperRcv,
    externalPortDefMaxBitErrorRate,
    externalPortDefFecType,
    externalPortDefLineCoding,
    externalPortDefFrameFormat,
    externalPortDefOpticalPowerTx,
    externalPortDefOsnrTransmit,
    externalPortDefPmdTransmit,
    externalPortDefChromDisperTx,
    externalPortDefMinOsnrRcv,
    externalPortDefMinOptPowerRcv,
    externalPortDefMaxOptPowerRcv,
    externalPortDefMaxPmdRcv,
    externalPortDefMinChromDisperRcv,
    externalPortDefSourceProfile
  }
  STATUS  current
  DESCRIPTION
    "A list of objects used for configuration of an entity in ADVA FSPR7 DEF MIB."
  ::= { groupsDef 1 }


END