BoardConfig.mk

#
# Copyright 2017 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

# This contains the module build definitions for the hardware-specific
# components for this device.
#
# As much as possible, those components should be built unconditionally,
# with device-specific names to avoid collisions, to avoid device-specific
# bitrot and build breakages. Building a component unconditionally does
# *not* include it on all devices, so it is safe even with hardware-specific
# components.

LOCAL_PATH := device/oneplus/n200
DEVICE_PATH := device/oneplus/n200

TARGET_OTA_ASSERT_DEVICE := OnePlusN200,OnePlusN200MPCS,OnePlusN200TMO,dre8m,dre8t,dre9

# Architecture
TARGET_ARCH := arm64
TARGET_ARCH_VARIANT := armv8-a
TARGET_CPU_ABI := arm64-v8a
TARGET_CPU_ABI2 :=
TARGET_CPU_VARIANT := generic

TARGET_2ND_ARCH := arm
TARGET_2ND_ARCH_VARIANT := armv7-a-neon
TARGET_2ND_CPU_ABI := armeabi-v7a
TARGET_2ND_CPU_ABI2 := armeabi
TARGET_2ND_CPU_VARIANT := generic
TARGET_BOARD_SUFFIX := _64
TARGET_USES_64_BIT_BINDER := true

ENABLE_CPUSETS := true
ENABLE_SCHEDBOOST := true

# Bootloader
TARGET_BOOTLOADER_BOARD_NAME := holi
TARGET_NO_BOOTLOADER := true
TARGET_USES_UEFI := true

# Kernel
TARGET_NO_KERNEL := false
BOARD_KERNEL_IMAGE_NAME := Image.gz
BOARD_KERNEL_CMDLINE := \
      firmware_class.path=/vendor/firmware \
      androidboot.console=ttyMSM0 \
      androidboot.hardware=qcom \
      androidboot.memcg=1 \
      androidboot.usbcontroller=4e00000.dwc3 \
      cgroup.memory=nokmem,nosocket \
      console=ttyMSM0,115200n8 \
      earlycon=msm_geni_serial,0xa90000 \
      lpm_levels.sleep_disabled=1 \
      msm_rtb.filter=0x237 \
      service_locator.enable=1 \
      swiotlb=0 \
      video=vfb:640x400,bpp=32,memsize=3072000

BOARD_KERNEL_PAGESIZE := 4096
BOARD_BOOT_HEADER_VERSION := 3
BOARD_KERNEL_BASE          := 0x00000000
BOARD_KERNEL_TAGS_OFFSET   := 0x00000100
BOARD_KERNEL_OFFSET        := 0x00008000
BOARD_RAMDISK_OFFSET       := 0x01000000
BOARD_MKBOOTIMG_ARGS += --base $(BOARD_KERNEL_BASE)
BOARD_MKBOOTIMG_ARGS += --pagesize $(BOARD_KERNEL_PAGESIZE)
BOARD_MKBOOTIMG_ARGS += --ramdisk_offset $(BOARD_RAMDISK_OFFSET)
BOARD_MKBOOTIMG_ARGS += --tags_offset $(BOARD_KERNEL_TAGS_OFFSET)
BOARD_MKBOOTIMG_ARGS += --kernel_offset $(BOARD_KERNEL_OFFSET)
BOARD_MKBOOTIMG_ARGS += --header_version $(BOARD_BOOT_HEADER_VERSION)
BOARD_MKBOOTIMG_ARGS += --dtb $(TARGET_PREBUILT_DTB)

TARGET_COMPILE_WITH_MSM_KERNEL := true
TARGET_KERNEL_ADDITIONAL_FLAGS := DTC_EXT=$(shell pwd)/prebuilts/misc/linux-x86/dtc/dtc LLVM=1
TARGET_KERNEL_CLANG_COMPILE := true
TARGET_KERNEL_CLANG_VERSION := r383902
TARGET_KERNEL_ARCH := arm64
TARGET_KERNEL_HEADER_ARCH := arm64
TARGET_KERNEL_HEADER_SOURCE := kernel/oneplus/sm4350
TARGET_KERNEL_CONFIG := vendor/dre-qgki_defconfig
BOARD_KERNEL_SEPARATED_DTBO := true
BOARD_INCLUDE_DTB_IN_BOOTIMG := true
# BOARD_PREBUILT_DTBIMAGE_DIR := $(DEVICE_PATH)/prebuilt/dtb
TARGET_PREBUILT_DTB := $(DEVICE_PATH)/prebuilt/dtb.img
BOARD_PREBUILT_DTBOIMAGE := $(DEVICE_PATH)/prebuilt/dtbo.img
TARGET_PREBUILT_KERNEL := $(DEVICE_PATH)/prebuilt/Image.gz


# NEED_KERNEL_MODULE_RECOVERY := false

KERNEL_MODULES_INSTALL := dlkm

# GENERIC_KERNEL_CMDLINE += androidboot.selinux=permissive

# Platform
TARGET_BOARD_PLATFORM := holi
# TARGET_BOARD_PLATFORM_GPU := qcom-adreno619
TARGET_USES_HARDWARE_QCOM_BOOTCTRL := true
QCOM_BOARD_PLATFORMS += $(TARGET_BOARD_PLATFORM)

# Partition Info
BOARD_FLASH_BLOCK_SIZE := 262144 # (BOARD_KERNEL_PAGESIZE * 64)
BOARD_USES_PRODUCTIMAGE := true

BOARD_BOOTIMAGE_PARTITION_SIZE := 100663296
BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE := $(BOARD_BOOTIMAGE_PARTITION_SIZE)
BOARD_SYSTEMIMAGE_JOURNAL_SIZE := 0
BOARD_SYSTEMIMAGE_EXTFS_INODE_COUNT := 4096
TARGET_USERIMAGES_USE_EXT4 := true
TARGET_USERIMAGES_USE_F2FS := true

BOARD_BUILD_SYSTEM_ROOT_IMAGE := false

# Dynamic/Logical Partitions
BOARD_SUPER_PARTITION_SIZE := 6442450944
BOARD_SUPER_PARTITION_GROUPS := qti_dynamic_partitions
BOARD_QTI_DYNAMIC_PARTITIONS_SIZE := 6438256640 # BOARD_SUPER_PARTITION_SIZE - 4MB
BOARD_QTI_DYNAMIC_PARTITIONS_PARTITION_LIST := \
    system \
    system_ext \
    vendor \
    product \
    odm

# Workaround for error copying vendor files to recovery ramdisk
# BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE := ext4
# BOARD_SYSTEM_EXTIMAGE_FILE_SYSTEM_TYPE := ext4
BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE := ext4
#TARGET_COPY_OUT_PRODUCT := product
#TARGET_COPY_OUT_SYSTEM_EXT := system_ext
TARGET_COPY_OUT_VENDOR := vendor

# Recovery
BOARD_HAS_LARGE_FILESYSTEM := true
BOARD_HAS_NO_SELECT_BUTTON := true
BOARD_SUPPRESS_SECURE_ERASE := true
BOARD_USES_RECOVERY_AS_BOOT := true
TARGET_NO_RECOVERY := true
TARGET_RECOVERY_DEVICE_MODULES += \
    libandroidicu \
    libcap \
    libion \
    libxml2
TARGET_RECOVERY_FSTAB := $(LOCAL_PATH)/recovery.fstab

# Use mke2fs to create ext4 images
TARGET_USES_MKE2FS := true

# AVB
BOARD_AVB_ENABLE := true
BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS += --set_hashtree_disabled_flag
BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS += --flags 2
BOARD_AVB_VBMETA_SYSTEM := system system_ext pruduct
BOARD_AVB_VBMETA_SYSTEM_KEY_PATH := external/avb/test/data/testkey_rsa2048.pem
BOARD_AVB_VBMETA_SYSTEM_ALGORITHM := SHA256_RSA2048
BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX := $(PLATFORM_SECURITY_PATCH_TIMESTAMP)
BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX_LOCATION := 2

BOARD_AVB_VBMETA := vendor odm
BOARD_AVB_VBMETA_KEY_PATH := external/avb/test/data/testkey_rsa2048.pem
BOARD_AVB_VBMETA_ALGORITHM := SHA256_RSA2048
BOARD_AVB_VBMETA_ROLLBACK_INDEX := $(PLATFORM_SECURITY_PATCH_TIMESTAMP)
BOARD_AVB_VBMETA_ROLLBACK_INDEX_LOCATION := 2

# Encryption

# TW_USE_FSCRYPT_POLICY := 1
BOARD_USES_METADATA_PARTITION := true
BOARD_USES_QCOM_FBE_DECRYPTION := true
PLATFORM_VERSION := 127
PLATFORM_VERSION_LAST_STABLE := $(PLATFORM_VERSION)
PLATFORM_SECURITY_PATCH := 2127-12-31
VENDOR_SECURITY_PATCH := $(PLATFORM_SECURITY_PATCH)

# Extras
TARGET_SYSTEM_PROP += $(DEVICE_PATH)/system.prop
TARGET_VENDOR_PROP += $(DEVICE_PATH)/vendor.prop

# TWRP specific build flags
TARGET_RECOVERY_QCOM_RTC_FIX := true
TARGET_RECOVERY_PIXEL_FORMAT := RGBX_8888
TARGET_USE_CUSTOM_LUN_FILE_PATH := /config/usb_gadget/g1/functions/mass_storage.0/lun.%d/file
TW_CUSTOM_CPU_TEMP_PATH := "/sys/devices/virtual/thermal/thermal_zone50/temp"
TW_THEME := portrait_hdpi
TW_QCOM_ATS_OFFSET := 1621580431500
TW_DEFAULT_BRIGHTNESS := 200
TW_MAX_BRIGHTNESS := 1024
TW_EXCLUDE_DEFAULT_USB_INIT := true
TW_EXTRA_LANGUAGES := true
TW_NO_SCREEN_BLANK := true
TW_HAS_EDL_MODE := true
TW_INCLUDE_CRYPTO := true
TW_NO_EXFAT_FUSE := true
TW_INCLUDE_REPACKTOOLS := true
TW_INCLUDE_RESETPROP := true
TW_OVERRIDE_SYSTEM_PROPS := \
    "ro.build.date.utc;ro.build.product;ro.build.fingerprint=ro.system.build.fingerprint;ro.build.version.incremental;ro.product.device=ro.product.system.device;ro.product.model=ro.product.system.model;ro.product.name=ro.product.system.name"
TARGET_RECOVERY_DEVICE_MODULES += \
    libandroidicu \
    libcap \
    libion \
    libxml2

TW_RECOVERY_ADDITIONAL_RELINK_LIBRARY_FILES += \
    $(TARGET_OUT_SHARED_LIBRARIES)/libcap.so \
    $(TARGET_OUT_SHARED_LIBRARIES)/libion.so \
    $(TARGET_OUT_SHARED_LIBRARIES)/libxml2.so

TW_LOAD_VENDOR_MODULES := "aw8697.ko touch.ko texfat.ko tntfs.ko op_cmdline.ko q6_pdr_dlkm.ko qcom_pm8008-regulator.ko q6_notifier_dlkm.ko snd_event_dlkm.ko apr_dlkm.ko socinfo.ko adsp_loader_dlkm.ko oplus_chg.ko pwm-qti-lpg.ko qcom-vadc-common.ko"

# TWRP Debug Flags
#TWRP_EVENT_LOGGING := true
TARGET_USES_LOGD := true
TWRP_INCLUDE_LOGCAT := true
TARGET_RECOVERY_DEVICE_MODULES += debuggerd
RECOVERY_BINARY_SOURCE_FILES += $(TARGET_OUT_EXECUTABLES)/debuggerd
TARGET_RECOVERY_DEVICE_MODULES += strace
RECOVERY_BINARY_SOURCE_FILES += $(TARGET_OUT_EXECUTABLES)/strace