WPL 23 E support

[giggo]

Posting my findings here until I might find time to do a PR.

`
VD HEIZEN
[22:57:30.752][I][Communication:217]: Message received: Read/Write ID 0x22 0x00(0x100) for property UNKNOWN (0x07fc) with raw value: 4962

VD WARMWASSER
[22:57:30.752][I][Communication:217]: Message received: Read/Write ID 0x22 0x00(0x100) for property UNKNOWN (0x0802) with raw value: 4240

VD ABTAUEN
[22:57:30.766][I][Communication:217]: Message received: Read/Write ID 0x22 0x00(0x100) for property UNKNOWN (0x0808) with raw value: 229

NHZ 1
[22:57:30.768][I][Communication:217]: Message received: Read/Write ID 0x22 0x00(0x100) for property UNKNOWN (0x0259) with raw value: 55

NHZ 2
[22:57:30.893][I][Communication:217]: Message received: Read/Write ID 0x22 0x00(0x100) for property UNKNOWN (0x025a) with raw value: 40

NHZ 1/2
[22:57:31.735][I][Communication:217]: Message received: Read/Write ID 0x22 0x00(0x100) for property UNKNOWN (0x0805) with raw value: 1505

ZEIT ABTAUEN
[22:57:31.957][I][Communication:217]: Message received: Read/Write ID 0x22 0x00(0x100) for property UNKNOWN (0x0807) with raw value: 6

STARTS ABTAUEN
[22:57:31.969][I][Communication:217]: Message received: Read/Write ID 0x92 0x00(0x480) for property UNKNOWN (0x0806) with raw value: 2624

Replace VORLAUFISTTEMP
[22:55:59.436][I][Communication:217]: Message received: Read/Write ID 0x92 0x00(0x480) for property UNKNOWN (0x01d6) with raw value: 350

ZWASCHENEINSPRITZUNGSTEM
[22:56:59.775][I][Communication:217]: Message received: Read/Write ID 0x92 0x00(0x480) for property UNKNOWN (0x05d7) with raw value: 215

REKUPERATORTEMPERATUR
[22:56:59.754][I][Communication:217]: Message received: Read/Write ID 0x92 0x00(0x480) for property UNKNOWN (0x07a3) with raw value: 39

DRUCK NIEDERDRUCK
[22:57:00.767][I][Communication:217]: Message received: Read/Write ID 0x92 0x00(0x480) for property UNKNOWN (0x07a7) with raw value: 431

DRUCK HOCHDRUCK
[22:57:00.786][I][Communication:217]: Message received: Read/Write ID 0x92 0x00(0x480) for property UNKNOWN (0x07a6) with raw value: 1610

Addieren
[22:52:26.633][I][Communication:217]: Message received: Read/Write ID 0x92 0x00(0x480) for property EL_ENERGIEAUFNAHME_HEIZ_TAG_KWH (0x091f) with raw value: 11
[22:52:26.205][I][Communication:217]: Message received: Read/Write ID 0x92 0x00(0x480) for property EL_ENERGIEAUFNAHME_HEIZ_TAG_WH (0x091e) with raw value: 399
zu
EL_ENERGIEAUFNAHME_HEIZ_TAG_KWH ?????? = VD HEIZEN TAG

Addieren
[22:52:26.650][I][Communication:217]: Message received: Read/Write ID 0x92 0x00(0x480) for property EL_ENERGIEAUFNAHME_HEIZ_SUM_MWH (0x0921) with raw value: 22
[22:52:26.246][I][Communication:217]: Message received: Read/Write ID 0x92 0x00(0x480) for property EL_ENERGIEAUFNAHME_HEIZ_SUM_KWH (0x0920) with raw value: 792
zu
EL_ENERGIEAUFNAHME_HEIZ_SUMME_KWH = VD HEIZEN SUMME

Addieren
[22:52:26.741][I][Communication:217]: Message received: Read/Write ID 0x92 0x00(0x480) for property EL_ENERGIEAUFNAHME_WW_TAG_KWH (0x091b) with raw value: 12
[22:52:26.303][I][Communication:217]: Message received: Read/Write ID 0x92 0x00(0x480) for property EL_ENERGIEAUFNAHME_WW_TAG_WH (0x091a) with raw value: 316
zu
VD WARMVASSER TAG

Addieren
[22:52:26.800][I][Communication:217]: Message received: Read/Write ID 0x92 0x00(0x480) for property EL_ENERGIEAUFNAHME_WW_SUM_MWH (0x091d) with raw value: 25
[22:52:26.343][I][Communication:217]: Message received: Read/Write ID 0x92 0x00(0x480) for property EL_ENERGIEAUFNAHME_WW_SUM_KWH (0x091c) with raw value: 557
zu
VD WARMWASSER SUMME

Richtig aufaddieren
[22:57:37.551][I][Communication:217]: Message received: Read/Write ID 0x22 0x00(0x100) for property VERDICHTER_STARTS (0x071d) with raw value: 355
[22:57:37.552][I][Communication:217]: Message received: Read/Write ID 0x22 0x00(0x100) for property VERDICHTER_STARTS_K (0x071c) with raw value: 37

Evtl ZEITINTERVALL
[22:58:45.529][I][Communication:217]: Message received: Read/Write ID 0x22 0x00(0x100) for property UNKNOWN (0x0691) with raw value: 1883

`

[giggo]

1. What does the target mean in
   VORLAUFISTTEMP: !include { file: wp_temperature.yaml, vars: { property: "VORLAUFISTTEMP" , update_interval: $interval_medium, target: "HK1" }} ? I had to remove it to get the right VORLAUFISTTEMP

2. I receive the right values for EL_ENERGIEAUFNAHME_HEIZ_TAG_WH and EL_ENERGIEAUFNAHME_HEIZ_TAG_WH but it doesn't get me the right value for EL_ENERGIEAUFNAHME_HEIZ_SUMME_KWH
   This is what I use:
   EL_ENERGIEAUFNAHME_HEIZ_SUMME_KWH: !include { file: wp_daily_energy_combined.yaml, vars: { sensor_name: "EL_ENERGIEAUFNAHME_HEIZ_SUMME_KWH" , property_wh: "EL_ENERGIEAUFNAHME_HEIZ_TAG_WH" , property_kwh: "EL_ENERGIEAUFNAHME_HEIZ_TAG_KWH" }}
   Any idea?

[kr0ner]

@giggo sorry for the late reply ... I was not able to dedicate my time to this project over the last month.

1, target means the "CAN participant" that provides the value ... there are multiple can controllers in every heatpump. Those serve a distinct purpose. If your heatpump has more than one heating circuit, you will have one VORLAUFISTTEMP for HK1 and one for HK2
2, Could you provide examples? A screenshot of EL_ENERGIEAUFNAHME_HEIZ_TAG_WH and EL_ENERGIEAUFNAHME_HEIZ_TAG_KWH over the day and what EL_ENERGIEAUFNAHME_HEIZ_SUMME_KWH looks like?

[kr0ner]

@giggo can you check, if #257 works for you?