Add initial ESPHome configuration for DSMRloggerAPI

This configuration file sets up an ESPHome device for monitoring DSMR data, including energy, power, and gas metrics.

Author: mrWheel

EspHome.yml

@@ -0,0 +1,111 @@
+#
+# contributed by ExploWare
+#
+
+substitutions:
+  name: dsmr-reader
+  friendly_name: DSMR Reader
+
+esphome:
+  name: ${name}
+
+esp8266:
+  board: d1_mini
+
+api:
+  encryption:
+    key: "password"
+
+ota:
+  - platform: esphome
+    password: "password"
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+  min_auth_mode: WPA2
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Dsmr-Logger Fallback Hotspot"
+    password: "password"
+
+captive_portal:
+
+logger:
+  # Serial logging is disabled by setting the logger baud rate to 0.
+  # Otherwise the logger will occupy the hardware UART, making it unavailable
+  # for receiving smart meter data on pin D7 (GPIO13).
+  baud_rate: 0
+  level: VERBOSE
+  
+uart:
+  rx_pin: GPIO13
+  baud_rate: 115200
+
+output:
+  - platform: gpio
+    pin: GPIO12
+    id: request_data
+
+interval:
+  - interval: 30s
+    then:
+      - output.turn_on: request_data
+      - delay: 500ms
+      - output.turn_off: request_data
+  
+sensor:
+  - platform: dsmr
+    energy_delivered_tariff1:
+      name: ${friendly_name} Energy Delivered Tariff 1
+      state_class: total_increasing
+    energy_delivered_tariff2:
+      name: ${friendly_name} Energy Delivered Tariff 2
+      state_class: total_increasing
+    energy_returned_tariff1:
+      name: ${friendly_name} Energy Returned Tariff 1
+    energy_returned_tariff2:
+      name: ${friendly_name} Energy Returned Tariff 2
+    power_delivered:
+      name: ${friendly_name} Power Consumed
+    power_returned:
+      name: ${friendly_name} Power Returned
+    electricity_failures:
+      name: ${friendly_name} Electricity Failures
+    electricity_long_failures:
+      name: ${friendly_name} Electricity Long Failures
+    voltage_l1:
+      name: ${friendly_name} Voltage L1
+    voltage_l2:
+      name: ${friendly_name} Voltage L2
+    voltage_l3:
+      name: ${friendly_name} Voltage L3
+    current_l1:
+      name: ${friendly_name} Current L1
+    current_l2:
+      name: ${friendly_name} Current L2
+    current_l3:
+      name: ${friendly_name} Current L3
+    power_delivered_l1:
+      name: ${friendly_name} Power Delivered L1
+    power_delivered_l2:
+      name: ${friendly_name} Power Delivered L2
+    power_delivered_l3:
+      name: ${friendly_name} Power Delivered L3
+    power_returned_l1:
+      name: ${friendly_name} Power Returned L1
+    power_returned_l2:
+      name: ${friendly_name} Power Returned L2
+    power_returned_l3:
+      name: ${friendly_name} Power Returned L3
+    gas_delivered:
+      name: ${friendly_name} Gas Delivered
+    
+text_sensor:
+  - platform: dsmr
+    identification:
+      name: ${friendly_name} Identification
+    p1_version:
+      name: ${friendly_name} Version
+