diff --git a/docs/dragon/q6a/faq.md b/docs/dragon/q6a/faq.md
index 86e1f2360..5f211d5e4 100644
--- a/docs/dragon/q6a/faq.md
+++ b/docs/dragon/q6a/faq.md
@@ -137,6 +137,26 @@ vim /usr/share/glib-2.0/schemas/org.gnome.settings-daemon.plugins.power.gschema.
 - 系统会以 `EL2` 而不是 `EL1` 启动，此时**可以**使用 KVM
 - `/dev/mtd0` 会消失，因此不能直接在板子上更新 SPI 固件
 
+## 为什么运行 `sudo apt upgrade` 后系统无法启动？
+
+直接使用 `sudo apt upgrade` 命令升级系统可能会导致更新不完全或系统异常（如无法启动）。建议使用 Rsetup 工具进行系统更新：
+
+<NewCodeBlock tip="radxa@dragon-q6a$" type="device">
+
+```bash
+sudo rsetup
+```
+
+</NewCodeBlock>
+
+进入 Rsetup 后，选择 **System** -> **System Update** 完成更新。
+
+详细信息请参考：[系统更新](../system-config/system-update)。
+
+:::warning
+如果在更新过程中断电或更新失败，系统可能无法正常启动。此时需要重新刷写系统镜像。
+:::
+
 ## 7 寸屏显示花屏如何解决？
 
 7 寸屏默认会使用 1080p 分辨率，如果屏幕不支持该分辨率会导致花屏，需要手动设置屏幕分辨率。
diff --git a/i18n/en/docusaurus-plugin-content-docs/current/dragon/q6a/faq.md b/i18n/en/docusaurus-plugin-content-docs/current/dragon/q6a/faq.md
index c26aa7b5c..232dd7714 100644
--- a/i18n/en/docusaurus-plugin-content-docs/current/dragon/q6a/faq.md
+++ b/i18n/en/docusaurus-plugin-content-docs/current/dragon/q6a/faq.md
@@ -135,6 +135,26 @@ After enabling the hardware encoder, the following changes apply:
 - The system boots in `EL2` instead of `EL1`, and KVM **can** be used
 - `/dev/mtd0` disappears, so you cannot update the SPI firmware directly on the board
 
+## Why does the system fail to boot after running `sudo apt upgrade`?
+
+Running `sudo apt upgrade` to upgrade the system may cause incomplete updates or system abnormalities (such as failure to boot). It is recommended to use the Rsetup tool for system updates:
+
+<NewCodeBlock tip="radxa@dragon-q6a$" type="device">
+
+```bash
+sudo rsetup
+```
+
+</NewCodeBlock>
+
+In Rsetup, select **System** -> **System Update** to complete the update.
+
+For more details, please refer to: [System Update](../system-config/system-update).
+
+:::warning
+If the power is interrupted or the update fails during the process, the system may fail to boot normally. In this case, you need to re-flash the system image.
+:::
+
 ## How to Fix 7-inch Display Garbled Screen Issue?
 
 The 7-inch display defaults to 1080p resolution. If the display does not support this resolution, it will cause a garbled screen, and you need to manually set the correct screen resolution.