Module V450: POWER1 and POWER2 are same part number, but different pin spacing

[olterion]

In schematic of the Module V450 the POWER1 and POWER2 connector are both linked to LCSC part number C265016 which is an connector with 2mm pin space.
But POWER2 has an pin spacing of 3,8mm.
Which connector this layout was made for?

Backround:
I have conntected my board with the 2mm connector, but sometimes I have bad connections due to the high current from balancing.
So my voltage measurement sometimes is wrong.
For that I want to change the connectors to bigger ones.

[stuartpittaway]

You are correct the 3.81mm pin spacing should be used.

I use pluggable terminal blocks. Lots of them on lcsc.