version 16.0.0 and 16.0.1 Animated Staircase bug

[Alfagek]

What happened?

From version 16 i have a strange behaivor with the staircase mod on my esp32.
When the sensor is getting triggert, it's putting all the led segments on, and you see on background off the leds it's "fading" each segment. And that's also with going out, you see a little fade en then all the segements going out.

When i switch back to a version below 16 its working all fine.

To Reproduce Bug

Working all fine with versions below 16. From version 16 it's starting. Also not fixt in 16.0.1.

Expected Behavior

fading on/of each segment. instead of full on and a little "fade" in de background

Install Method

Self-Compiled

What version of WLED?

WLED 16.0.1 2605010

Which microcontroller/board are you seeing the problem on?

ESP32

Relevant log/trace output

Anything else?

No response

Code of Conduct

• I agree to follow this project's Code of Conduct

[DedeHai]

not really clear what you mean, a video comparison would help

[Alfagek]

not really clear what you mean, a video comparison would help

Version below 16 (like it should work, this is version 15.4): https://share.icloud.com/photos/064XZHw-sHwW6zwc21e8DooTw

Version 16.0.0 and also 16.0.1: https://share.icloud.com/photos/0c1obqgxZSY6P82gULVyMyfhQ

All the segments are going on, and then you see a little bit brightness differance in the segments going up. And if i upload version 15.4 back it's working like it should be.

Hopely it's a bit more clear now ;-)