Custom automated firmware builder for D-Link DIR-1360 A1, providing patched and legacy-compatible OpenWrt builds.
Even though official support exists (from 25.12), this repo solves multiple real-world issues:
- Official support starts from 25.12
- Many users still prefer:
- 22.03 (stable)
- 23.05 (stable)
- 24.10 (stable)
This automatic builder provides ready-to-flash images for older stable versions.
Some mt76-based devices suffer from poor 5GHz performance
A community patch exists, but:
- Cannot be merged upstream (affects non-external PA devices)
This builder includes the fix for:
- 24.10.6
- All future 25.12.x builds
80% of times router fails to bootup.
This automatic builder includes:
- PHY LED deadlock fix
Applied only to:
- 24.10.x
- 23.05.x
- GitHub Actions-based pipeline
Automatically:
- Detects new OpenWrt releases
- Builds firmware
- Publishes to Releases
📌 For 25.12.x: New builds will appear automatically within ~6–8 hours after official release.
| Version | Status |
|---|---|
| 22.03 | Built once |
| 23.05 | Built once |
| 24.10 | Buult till EOL |
| 25.12 | Continuous builds (future releases) |
Click Here to go Github Releases section of this repo.
You will find:
factory.bin→ for first-time flashingsysupgrade.bin→ for upgrading existing OpenWrt
-
Set static IP on your PC
- IP:
192.168.0.10 - Gateway:
192.168.0.1
- IP:
-
Connect PC to router
- Use LAN port
-
Enter recovery mode
- Power OFF router
- Hold Reset button
- Power ON while holding
- Keep holding for ~5 seconds
-
Open recovery page
-
Upload firmware
- Select
factory.bin - Wait for flashing & reboot
- Select
- First boot may take a few minutes
- Do NOT power off during flashing
- Use
sysupgrade.binonly for upgrades - 22.03 builds use older toolchain (best effort support)
- OpenWrt Team
- mt76 contributors
- Community patch contributors
If this project helps you:
Star ⭐ the repo Share with other DIR-1360 users