Requirements: Mouse, Keyboard, Flash Drive formatted to FAT32
I wanted to install AIO Tweaks on my car(CX-3, should work with other mazdas using the same infotainment system) using this Tutorial, but I got stuck in the first step since my touchscreen doesn't work, and the encoder/knob doesn't work in the diag menu.
- I took the files from https://github.com/mzd-evo/mzd-connect-1-root/ and modified it to launch the diagnostic without user interaction.
- Using a mouse to (blindly) navigate the diagnostic menu.
- Download/clone this repo, and move it to the root directory of the USB Drive.
- AIO Tweaks
- Install Options ✓ Build run.sh ✓ Skip Confirmation
- Enable Wifi & Install SSH_bringback
- Select your desired tweaks - See original tutorial/forum post to see which tweaks (don't) work
- Start compilation and copy to USB Drive.
- After copying, modidy run.sh(according to original post), "Search for '-eq 70' and replace it with '-eq 74'." (it won't install without changing this)
- Plug the mouse and drive in.
- Navigate to entertainment menu, and select the USB Drive.
- Wait a couple seconds, and it should automatically launch the diagnostic menu.
- Navigate with the mouse blindly. (invisible cursor)
- Though you can't see your cursor, it's still there.
- What I did
- Move imaginary cursor to the bottom right, move it slightly to the left, and up, hit next twice(I think) until you see the terminal. Now, move IT up a bit, and to the left and you (hopefully) click the terminal. (the hard part ends)
- Disconnect mouse, and connect keyboard.
- Terminal
cd /tmp/mnt
ls
*In the output, there should either be an sdX1, where X can be a, b, or, c. lets say sdb1*
cd sdb1
./run.sh-
It shouldn't need confirmation, IF you selected "Skip Confirmation," in the install options, and should reboot on it's own after installation.
-
For future installations, you can just SSH to the CMU and do the "Terminal" steps again.
Need help? Add me on discord: shuncey