Can Example for Arduino Core STM32

This is project SuperCAN. An open source USB to CAN-FD protocol.

the Ganymede keyboard. An ARM based, split, ergonomic keyboard

A cross-platform set of examples for the stm32 line of mcus

Ravenna Ultra-Low-Altitude Operating System: An embedded OS for AVR and ARM CPUs

The FlashStorage_STM32F1 library aims to provide a convenient way to store and retrieve user's data using the non-volatile flash memory of STM32F1/F3. It's using the buffered read and write to minimize the access to Flash. It now supports writing and reading the whole object, not just byte-and-byte. New STM32 core v2.0.0 is supported now. Useful…

Code samples for the MagAlpha magnetic angle sensor family

A collection of projects and libraries for STM32 based micro-controllers family.

STM32F303CC Servo Motor Control

This is a virtual device utilizing the STM32 F303 board as a lock-in amplifier.

Air Humidifier: Umidificatore con controllo automatico con le STM32F3Discovery e interconnessione con protocollo UART

stm32f303vct6-discovery garland with shim, different regimes, keypad(3 buttons)

breakout boards for various ICs to allow easy prototyping

Portable radio noise measurement system, based on an STM32f303re microcontroller.

CMake example project for VSCode and STM32F303 in C

This code contains initialization and functions to draw picture as portrait and as lansdcape + other drawing functions as circle.

Bare-metal C firmware for a 10W Solar PV MPPT Boost Converter running on an STM32F303K8T (Nucleo-32). Implements a 100 kHz Perturb & Observe (P&O) control loop with a 5mW jitter-suppression dead zone, discrete ADC signal conditioning (V/I telemetry), and high-speed USART live tracking diagnostics.

Unified abstraction layer and HAL for several microcontrollers (focus of this fork is STM32F3DISCOVERY board support)

This project is a template for using rake to build STM32 embedded projects.

Embedded Rust w/ Embassy blink driver.